Questions and Answers for Surebonder 1/4 in. Heavy-Duty Manual Rivet Tool

A:  What you're trying to say isn't very clear to me. When using a rivet gun, a hole appropriate for the width and depth of the specific rivet you have in mind in drilled. The rivet is then inserted into the rivet gun and, of course, into thew hole in a manner that secures what you're attempting to attach. If you're asking whether or not you can then insert a screw into the center of the rivet, then "no" is the answer. But if your looking to use the above rivet gun with rivet, I've used it and it works well. I have both aluminum and stainless steel rivets and it works well with each.

A:  no i do not have the rivet nut tool

A:  This is not a nail tool, unless you are referring to the rivet pull shank diameter. The tool comes with several diameter pull collars.

A:  This will handle: aluminum and steel 3/32 in., 1/8, 5/32 in., 3/16 in., 1/4 in. and 15/64 ft. diameter rivets copper 1/8 in. and 15/64 in. Dia rivets stainless steel 1/8, 5/32 in. 3/16 in., 1/4 in. and 15/64 in. Dia rivets

A:  Not sure but, unless you're planning on using this commercially and installing many thousands of rivets, that's unlikely to be a problem. Maybe you should be .looking at commercial-industrial rivet guns?

A:  Hi, Thank you for your recent inquiry with The Home Depot. Replacement parts are available to a limited amount of products. To see if the vendor offer parts for this item please reach out to our Parts Team at (800) 430-3376. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  that i'am not sure call the seller should be able to help you with that

A:  They will not work at 1/4-inch in nylon.

A:  yes, you might have to change the compression head to accommodate you rivet size. The rivet break strength is determined by the rivet, not the tool.

A:  Simply no, I almost made that mistake. What you need is Rivnut tool, there are several other methods with out special tools yet you can find the "Threaded Insert Riveter Kit" both in many toold and hardware stores and on eBay for less than $25.00. You'll certainly many more uses for it.

A:  It's a rivet tool for putting in rivets, not rivet nuts which, I believe, don't exist.

A:  no it can't need a tool that says rivet nut tool

A:  Yes, it's for "pop" rivets.

A:  Yes, this device can be used for blind rivets.

A:  Yes. It's mopre heavy duty than most rivet guns ...can handle even 1/4" stainless steel blind rivets.