Q:I plan to cap my shower curb with cultured marble which recommends using silicone for attachment. Can silicone work directly on the Durock or do I need to attach a backer board to the Durock first with thin set mortar and then attach the marble to that?
by|Apr 6, 2017
1 Answer
Answer This Question
A: Thank you for your question.
This will depend on the type that is being used. additional information would be needed on the silicone type.
by|May 4, 2023
Q:Is this product available in Canada
by|Mar 26, 2017
1 Answer
Answer This Question
A: Hi Larry, unfortunately the Homedepot.com is not able to provide stock information regarding stock of 48 in. x 5 in. x 4-1/2 in. Shower System Curb Home Depot stores. I would check with the referenced Home Depot online site:
http://www.homedepot.com.mx/comprar/es/coapa-del-hueso/home / https://www.homedepot.ca/en/home.html
Also, I would advise you contact your local Home Depot stores for capabilities and availability of products. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
by|May 18, 2017
Q:Can a glass enclosure be installed onto this curb?
by|Mar 13, 2017
1 Answer
Answer This Question
A: Rosapete
Durock Shower System curbs are strong enough to support glass doors. They can accept anchoring, which would also supplement the attachment to the walls on the side. Thanks for choosing USG.
by|May 4, 2023
Q:Can the width of the curb be cut down to three inches
by|Feb 1, 2017
1 Answer
Answer This Question
A: Thank you fr your question.
Yes you can cut the curb to accommodate your size.
by|May 4, 2023
Q:How to cut it?
What tool do I need to cut this Durock curb ?
by|Jan 27, 2017
1 Answer
Answer This Question
A: Thank you for your question
We recommend by sometime of saw with a smooth blade.
by|May 4, 2023
Q:My fiberglass stall shower curb is only 2" height from inside, outside 3" height.
We use shower liner, not using glass door. We want to make a shower curb higher, about 6 inches. Can I attached this Durock curb to existing curb by glue, silicon or whatever ?
Linh
by|Jan 27, 2017
1 Answer
Answer This Question
A: Thank you for your question.
We recommend the Durock adhesive for this application.
by|May 4, 2023
Q:Example: I have looked at the manual and can't figure out what I did wrong.
by|Oct 10, 2016
1 Answer
Answer This Question
A: Thank you for your question. The Durock Shower System Curb is 48" long. If your shower pan is 60" long the Shower Kit will include two 48" curbs that can be cut and placed end to end to equal 60".
by|Jun 12, 2019
Q:We have a wheelchair accessible shower "wet room". We would like to enclose to keep water off the rest of the floor. Can we apply this directly over tile?
by|Sep 7, 2016
1 Answer
Answer This Question
A: Thank your question. We recommend directly to the floor base not over the tile it may leak due to the grout lines.
by|May 4, 2023
1 found this answer helpful
Q:Can the 4 1/2" dimension be cut to 2 3/4"?
by|Jul 16, 2016
1 Answer
Answer This Question
A: Thank you for your question.The curbs can be cut down to accommodate smaller sizes.
by|May 3, 2023
Q:Example: I have looked at the manual and can't figure out what I did wrong.
by|Jul 8, 2016
1 Answer
Answer This Question
A: Good morning, Our curbs are strong enough to support glass doors. They can accept anchoring, which would also supplement the attachment to the walls on the side.