Questions and Answers for YARDGARD 10 ft. W x 6 ft. H Galvanized Steel Drive-Through Gate 2-panels

A:  Unfortunately this drive-thru gate is not available in black. Thank you for your question.

A:  Please contact your local Home Depot store for assistance.

A:  No

A:  No, it is not adjustable.

A:  no it comes complete just hang it up.

A:  Yes, an assemble is required for this gate.

A:  Hello Confused, thank you for your question. Some assembly is required. You will need to mount hardware to the support posts and gate frame. You will need to mount the drop rod assembly. The two panels should arrive assembled. Regards, your YardGard support team.

A:  The gate is already assembled except for the latching pole - extremely easy fix too.

A:  No

A:  You can go to your THD pro desk and they can have a gate specially made for your space. Thank You, Jennifer Customer Care

A:  Yes, Need to purchase screw hinges (only the side that goes on the post, the side that goes on the gate you can use those included)

A:  Yes, you can install the gate to the wooden posts.

A:  Yes I check the Home Depot web site and found a part that will screw into a 4x4 wood post. Lag Screw Hinge p/n 328506b should work for you. Your home depot employees should be able to help with this. I would ask them, they may have several options for you.

A:  While yes, your gate can be installed on a wooden post, we recommend using the appropriate chain link gate hardware and posts. If you are attaching the gate to a wooden post you would need to purchase a lag screw hinge and a frame hinge. Thank You, Jennifer Customer Care

A:  yes, depending on the size of your posts. J bolts (top and bottom) for this size gate should be at least 6 in in length with screw portion about 4in so that you have the standard 2in gap. Works well, just make sure that your posts are set with NO " lean", so they plumb . Best to set your 10ft pole, 3ft deep in packed drain rock and dirt. Avoid concrete if you can.