#1 Home Improvement Retailer

Customer Reviews for Columbia Forest Products 1/4 in. x 2 ft. x 8 ft. PureBond Mahogany Plywood Project Panel (Free Custom Cut Available)

Internet #204636955

Model #2359

Store SKU #1000337394

  • Free custom cut available - See details below
  • Mahogany plywood strength, performance and durability
  • Mahogany veneer on face side of plywood

Customer Reviews

  • 4.5
    out of 130 reviews
  • 83% recommend this product
Filter by:
Showing 1-30 of 130 reviews
Beautiful
Used with Swaner Hardwood 1x6 African Mahogany also purchased from Home Depot to create beautiful wainscot on staircase wall.
by
    • Recommended
    I need a solid and even core plywood for my artworks and after searching everywhere, I found the ...
    I need a solid and even core plywood for my artworks and after searching everywhere, I found the Columbia ply. After putting it through my laser cutter, it performed flawlessly. No gaps in the core, even thickness (critical for lasering) and great finish on the cutting edges. I wished I could just pick it up at the local Home Depot but shipping is free and very well packaged from Columbia. I highly recommend this plywood for fine work. Art of lamp www.artoflamp.com
    by
    • Verified Purchase
    • Recommended
    While building a dovetailed blanket chest out of solid African Mahogany, I needed a piece for the...
    While building a dovetailed blanket chest out of solid African Mahogany, I needed a piece for the bottom panel. I ordered the Columbia Forest Mahogany plywood (This listing was for the 3/4" plywood but has since changed...) and it was really nice, especially for the money and how fast it was delivered. There were no voids on the different layers of the plywood and the faces of the veneer were spotless. Color was great and took the varnish really well. Highly recommend and will be buying again when I need Mahogany plywood.
    by
      • Recommended
      Used this product for a laser engraving project. It was perfect. Easy to cut and finish. The p...
      Used this product for a laser engraving project. It was perfect. Easy to cut and finish. The project came out absolutely beautiful.
      by
      • Verified Purchase
      • Recommended
      This is a great looking wood. I found with out a vary fine tooth blade, this wood seems to develo...
      This is a great looking wood. I found with out a vary fine tooth blade, this wood seems to develop a splintered edge. My self I did not run into voids so much as the other reviewer did who has issues, but I did run in to a different issue. Upon cutting it i seemed fine at first, but then warped over night and not like a little warp but a crazy fun house warp. we had to cut a entrance way and 2 ' windows' out So we glued it down to a second sheet with gorilla glue, and let them set over night with the weight of cinder blocks on it. upon removing the cinder blocks, it just popped off the ground, like ha ha, you did not stop my warp. and it was warping in different directions at the same time. so around the doorway we screwed in place 2 x 2 's and 3/4 inch plywood aground the windows and all of the sides had to be screwed into place. In the end it worked, but for all of the extra work, due to its warping, it was both the first and last time ever using this product. This is the wood with the green door in it in the picture. I used it for the first wooden bearded dragon house I ever built. For all of the head achs, I would go with a nice 3/4 or 23/32 AC plywood in the future and did.
      by
      Response from Columbia Forest ExpertSep 24, 2017
      Hello,
      We apologize for the issue. The plywood should not have the issues you describe in the review. I would like to discuss the issue with you and see what we can do to make it right. I can be reached at 800-637-1609 or by email at kcrisp@cfpwood.com. Kevin ColumbiaForestProducts
      • DIY
      1 found this review helpful
      Makes a Beautiful Project
      Mahogany is not available locally and not at all Home Depot stores, I used it to make a case for a serving set I made for my wife, the wood is a bit more expensive than the other woods carried by Home Depot but the results are astounding. My resultant project is absolutely beautiful everyone that has seen it has asked if I'd consider making them one.
      by
      Response from Columbia Forest ExpertFeb 25, 2016
      Hello Farley, Thank you for taking the time to write a review of the mahogany plywood. We appreciate the positive feedback and I’m sure the project looks awesome. ColumbiaForestProducts
      • DIY
      • Verified Purchase
      • Recommended
      3 found this review helpful
      Exceptional quality of Mahogany lumber
      Great quality of wood, nice price and delivered for free if you purchase $45 worth
      by
      • Verified Purchase
      • Recommended
      15 found this review helpful
      I cut the board into 6-inch wide strips which I used to conduct stain, dyes, and tints experiments. It took me where I needed to be.
      by
      • Verified Purchase
      Great product and shipped fast
      by
      • Verified Purchase
      Turned out very nice
      by
      • Verified Purchase
      I’m an artist who paints on wood panels. I had my wood custom cut before shipping. The cuts were accurate and the shipping was quick. Great service!
      by
      • Verified Purchase
      We accomplished our goal of determining which stain to use for our new front door prior to installation
      by
      • Verified Purchase
      Exactly as pictured and advertised. Arrived in excellent condition and Home Depot employee made two perfect complimentary cuts for us. Good job Home Depot!!
      by
      • Verified Purchase
      This Mahogany Plywood is exactly what I needed for a small project. The price, including a free custom cut was simply amazing, and the delivery was even better, arriving without shipping charges in only a few days.
      by
      • Verified Purchase
      The size is closer to 3/16 " than to 1/4 " It is described in small print the size in decimils why???? lets say the size properly it will not fit in a dado of any standard size. could not make it work. Toooo Bad nice finish and color maybe I can use it as veneer.
      by
      Response from CFP Customer ServiceNov 2, 2023
      I apologize for the issue. The plywood should not have the issues you describe in the review. I would like to discuss the issue with you and see what we can do to make it right. I can be reached at alec.neugent@cfpwood.com. Thanks.
      • Verified Purchase
      Product was received with no damage and was perfect for its application and use. Note: this is surfaced on one side.
      by
      • Verified Purchase
      Arrived in good shape. A little warped, but that’s...
      Arrived in good shape. A little warped, but that’s expected.
      by
      • Verified Purchase
      by
      • Verified Purchase
      Good quality materials and nicely cut but the sheet was...
      Good quality materials and nicely cut but the sheet was thinner than 1/4” making it difficult to plan accurately how to join pieces together.
      by
      • Verified Purchase
      Not for finished products
      Sheet was bowed quite a bit and not flat at all. Both surfaces were somewhat rough requiring sanding for final product. Cutting with 10" 60 tooth carbide or regular Craftsman plywood blade both resulted in splinters separating from the core along the edges.
      by
      • Verified Purchase
      by
      • Verified Purchase
      by
      • Verified Purchase
      by
      • Verified Purchase
      It has been a pleasure to work with this mahogany...
      It has been a pleasure to work with this mahogany plywood, but I am finding it slightly warped, making it challenging in my laser cutter. I was able to overcome this quite favorably.
      by
      • Verified Purchase
      What is amazing about the Columbia Products Mahogany 1/4" (actually...
      What is amazing about the Columbia Products Mahogany 1/4" (actually it is 5.159mm) Purebond plywood is the quality and consistency of the wood. It is incredibly beautiful and with the 3 ply poplar core it laser cuts and engraves with one pass on my 60watt laser engraver/cutter. I design all my jewelry boxes, wine boxes and cases with Columbia products plywood using either SolidWorks or Fusion 360 and the consistency of size is so critical and this plywood is PERFECT. I have used every version of the 1/4" plywood and it is all outstanding. If you need the ultimate in quality and beauty...this is the best I've found in 15 years.
      by
      • Verified Purchase
      Square, flat and no ripples! Very attractive grain pattern in...
      Square, flat and no ripples! Very attractive grain pattern in the mahogany surface.
      by
      • Verified Purchase
      by
      • Verified Purchase
      by
      • Verified Purchase
      great
      Good quality, received ahead of schedule, no problems
      by
      • Verified Purchase
      • Recommended
      good product fair price...
      good product fair price
      by
      • Verified Purchase
      Showing 1-30 of 130 reviews

      Frequently Bought Together

      +
      +
      Price:
      $82.80