Very bright, easy to install and completely tool-free adjustments. The housing measurements (with...
Very bright, easy to install and completely tool-free adjustments. The housing measurements (without lights) are: 5 1/8 radius and 3 1/8 deep. The lights can be turned in all directions without tools and they stay put. Very bright at 2000-2200 lumens depending on the light setting / color. I prefer the 4000k, but can be switched to a whiter 5k or warmer 3k. I like the fact that the color adjustment is on the outside, so can be adjusted to liking after installation. Installs onto a wall or eve using the included bracket (ground wire attached), then attaches using the color matching capped screws. The housing is completely sealed with two wires sticking out, so seems to be quite weather proof. Caulking is optional. The entire assembly is made of plastic so should last without rusting. The lenses are sleek looking and although small, provide quite a bit of light. I chose the Bronze color which looks nice on my beige siding. The photocell works and turns the light off during daylight hours. I can always use the wall switch to manually turn it off. But I’m not concerned as the LEDs are quite efficient drawing only 20.3 watts. Great product.
I was looking into changing out my old halogen flood lights to new LEDs. Inside our home we use t...
I was looking into changing out my old halogen flood lights to new LEDs. Inside our home we use the daylight (5000K color temp) bulbs and wanted to continue that to the outdoor lighting as well. The WHITE OUTDOOR INTEGRATED LED DUSK TO DAWN FLOOD LIGHT WITH SELECTABLE COLOR TEMPERATURE AND INTEGRAL PHOTOCELL SENSOR product is what I ended up selecting and although I meant to grab 2 WHITE OUTDOOR INTEGRATED LED FLOOD LIGHT WITH SELECTABLE COLOR TEMPERATURE.
Installation was easy: turn off the power, remove the old flood light housings, install the new bracket, and install the new flood light. One thing to note on the installation is that the bracket and the corresponding holes on the flood light are ever so slightly misaligned. I had to pry open the bracket just a smidge to get the light onto it.
To overcome the photocell sensor, simply put some tape or paint over the sensor and it will work solely off the switch (about a 5 second delay to turn on this way). It would be nice if the flood light itself had a switch to disable the photo sensor.
Overall I am very happy with this flood light and would buy again but without the photocell sensor.
This Halo LED outdoor light will get the job done and should last a long time. The light is made of “polycarbonate” a very strong and long lasting thermal plastic. My last LED dusk till dawn light that I replaced with this one was made of powder coated cast aluminum and in just a few years it disintegrated in out harsh gulf coastal Texas climate (see photo). This “dusk till dawn” light provides 1000 lumens of light that you can adjust to whatever angle you desire. You can also adjust the color range you prefer: 3000K soft golden glow, 4000K cool or 5000K daylight white light. You just set the color you want with a screwdriver (see photo). The LED light has a predicted lifetime of 50,000 hours. Installation was simple with only one problem encountered; the screws the base of the light plate mounts to at ¾” were too short and gave me problems. I swapped them out for 1” screws and it mounted much easier. Over all I am happy with the light and I have provided some photos to aid the prospective buyer.
Light compact design with flexible directional positioning. Installation bracket with wire nuts ...
Light compact design with flexible directional positioning. Installation bracket with wire nuts included. Electrical connections are straight forward with the Black and White wires from the back of the unit and a bare ground wire attached to the bracket.
My only concern with the installation of the unit is that it does not have a rubber like gasket between the unit and the wall to prevent moisture from getting into the back of the unit.
The packaging indicates this fixture has 1346 Lumens brightness (not 1000). Rated at 13.1W, this ...
The packaging indicates this fixture has 1346 Lumens brightness (not 1000). Rated at 13.1W, this is a 90W incandescent equivalent.
Reduced energy consumption and avoiding bulb replacement are a great feature for an every-night dusk-to-dawn, long-burning security light. The adjustable heads guarantee light in just the right place and the added feature of adjustable color temperature practically ensures you’ll find a match to already-existing floodlights and create more uniform curb-appeal when lit at night.
We found the manufacturer’s ‘Instruction Manual’ and packaging essential in determining the functionality and applicability of this product (neither are available on the website). See photos included for additional details.
The installation diagrams are clear and almost large enough to read without ‘cheaters’; the written step-by-step instructions are detailed and easy to follow. All parts are included (both two #6 and two #8 screws to adapt to the existing junction box), but you’ll need a Phillips screwdriver and some weatherproof silicone caulk to finish the job.
The packaging indicates this fixture has 2200 Lumens brightness (not 2000). Rated at 20.3W, this ...
The packaging indicates this fixture has 2200 Lumens brightness (not 2000). Rated at 20.3W, this is a 180W incandescent equivalent.
Reduced energy consumption and bulb replacement costs are a great feature for an every-night, dusk-to-dawn, long-burning security light. The adjustable heads guarantee light in just the right place and the added feature of adjustable color temperature practically ensures you’ll find a match to already-existing floodlights and create more uniform curb-appeal when lit at night.
We found the manufacturer’s ‘Instruction Manual’ and packaging essential in determining the functionality and applicability of this product (neither are available on the website). See photos included for additional details.
The installation diagrams are clear and almost large enough to read without ‘cheaters’; the written step-by-step instructions are detailed and easy to follow. All parts are included (both two #6 and two #8 screws to adapt to the existing junction box), but you’ll need a Phillips screwdriver and some weatherproof silicone caulk to finish the job.