Customer Reviews for EdgeStar Twin Tap 20 in. Full Size Beer Keg Dispenser with Low Temperature Settings in Black

Just a few improvements needed. I did not have gaskets included with my shipment for the beer end. I needed to add some to mine to get a seal that did not leak, metal on metal does not work friends. Also leaked on the co2 end, which I solved with thread tape. Consider adding that before sending out the product. After some adjustments hover, its pouring like a dream and Im loving it.

My wife and I bought this kegerator as an early Christmas present for each other. It is now March and I’ve had to replace the regulator and both sankeys because they were of poor quality and leaked gas and beer. Now before I can actually enjoy my system I have to replace the beer lines because the prefabricated fittings leak. I have wasted so much beer it is ridiculous. This product is complete trash and needs to be redesigned.

My wife and I bought this kegerator as an early Christmas gift for each other. It is now March and I’ve had to replace both sankys and the regulator. The amount of beer o have wasted because the pieces do not fit together properly is ridiculous. Now the feeder line from one of the sankeys is no good and had to be replaced. This product is complete trash. I basically bought a small refrigerator.

Rating provided by a verified purchaser

Instructions were clear, took about 30 minutes. Only issue was the instructions kept referencing tubes that were "blue" when the ones included were actually orange. I thought perhaps I was missing parts for awhile until I figured it out. Fridge keeps the keg nice and cold too

We love it! The only thing we don’t like is that it doesn’t sit right against the wall. It sticks out... other than that we love it & are enjoying it!

I had read some negative reviews about this being able to take 2 sixtels, well I can honestly say if you install the pipes correctly you can fit 2 sixtels in nicely.The taps seem to be good quality, I have a couple of parts and had mine a few months now with no problems, chilled beer every night!! Lifes good!

Our super sweet friend Ashley bought my wife and I the EdgeStar Twin as a house warming gift and we love it! Best gift we've ever had and our friends love it too. It works perfect and was really easy to put together. And it's cheaper than going out :)

I am very pleased w/ my Kegerator and so are my neighbors! The noise thing I read about is not an issue at all as mine is set-up in my kitchen.

Real easy to use

Easy to set up and enjoy!

Has a bad ball valve in one of the taps lost a keg of beer and tank of C02. I have attempted to contact Edgestar and have received no response. I can not return it as I still have one keg in it onceThat keg is gone it’s going back. Do not by this

Excellent

Works great, Looks great, would have been nice to of had a laminated card with direction on how to set it up and unhook new keg. But as a whole everything was awesome.

Perfect for what I needed. Received quickly, put together easy and has been working better than I expected for the price. Thanks !!!

Purchase the two tap kegerator and it was easy to setup. It keeps my beer chilled to the perfect temperature and changing out kegs is super easy. A great value !

There were a couple of issues with setting it up. The first being the hose clamps and directions. If the hose clamps shown in the picture are not what is in the bag people can become confused. I also needed rubber washers for the CO2 hoses going into the kegs. Without those CO2 leaks out slowly. Other than those two minor items the product is very good.

Oder arrived quickly and was very well packaged. No dents or damage from being shipped. Very easy to assemble. Make sure you get the correct line attachments. Unfortunately, this set up doesn’t come ready to accept two Cornelius Kegs. You have to buy extra fittings to run Corny Kegs. Otherwise, great product. I couldn’t be happier with it!

It is very nicely built. Works well and keeps a steady temperature. I also purchased a tower cooler, which keeps the beer cold at the tap all the time. The specs say it will hold 2 1/6 kegs, and it does, with absolutely no extra room...meaning they have to be positioned exactly in specific spots in order to get the door to close. You also have to make sure there are no hoses along side the kegs, they must all be tucked on the top to get the door to close. That also made it tricky for the tower cooler installation, but we figured it out. Overall, very nice.

I love it. The regulator is a little off but still a great purchase. I recommend this to everyone

Works for residential use, I do not recommend for restaurants. The beer do not fit in! It’s a very tight squeeze

I take my beer very seriously. 2 months in and this unit is flawless. Perfect temperature and the Co2 regulator works to the 1/10th of a psi. Unit is compact, just barely fitting two sixtels but they fit. I love this kegerator. Cheers!

i love it but, the co2 cartridge ran out in a week and I cannot find any leaks.

Setup was a breeze with the instructions. Had a problem with one of the keg couplers leaking CO2, mentioned it to EdgeStar and they shipped me an entire TapRite replacement system. Beer stays cold and everything works exactly as promised. I bought a small thermometer with a remote sensor and keep my beer between 38-40 with no issues.

Unfortunately the lines freeze at ultra low temperature, so you cannot pour very cold beer. Beyond that it works great and normal Refrigeration temperatures

I was unable to get the second coupler (I have the two tap version) to work with the washer provided. And it took me multiple attempts to get the first coupler to work. The issue was the seating of the washer, such that each coupler leaked around the beer line connector, no matter how much I tightened it, and before even pressurizing the CO2 line. I had to go to the hardware store and get a thin washer with the same diameter to install with the washer provided with the coupler...and then it worked. I think there is a design issue with the washer, or threading of the beer line screw. The bottom line is that this product did not work as advertised right out of the box. Given that, and the price, I would not purchase this again. I am giving it two stars, because it is keeping the temperature really low.

Perfect kegerator for us! Very quite while it running and haven’t noticed a a big change in our electrical bill. Duel tap is great. It has been a huge hit at out summer get togethers. Only downside that we talked about is it’s a guessing game on how much is left in the kegs.

I bought one for me and one for my son for Christmas this year (2017). So far I am happy. Everything came, and set up was easy. My biggest concern is how long these units will last. So I bought the extended warranty, and I hope that if I have any problems that the company will honer it.

Had my kegerator for about 6 months now and I must say this was the best upgrade I've made in homebrewing so far. Kegging is much easier than bottling 5-10gal worth of beer, love the ease of having a nice cold pint after work. Assembly was breeze and this kegerator holds temps pretty well. I suggest placing a stand alone thermometer inside to know the exact temps. Not too bulky with the co2 tank sitting on the outside of the kegerator as I have mine in a diagonally in a corner in my office. I do recommend replacing the taps with better quality ones like intertap or perlick to avoid sticky/leaking taps. Also, converted my taps to hook up to ball lock kegs so you will need a conversion kit and longer lines to prevent foaming. I have 650ss flow control perlick taps so foaming isn't an issue but the included 5ft of beer lines isn't enough to have foamless pours. Will need at least 10ft (i have 12ft of lines on each tap). You will also need a draft arm wrench, as mine wasn't included, to take apart the taps and beer lines. My only con is that this doesn't have a dual regulator to carbonate and serve two beers at separate psi's. The tank sits on the outside of the kegerator but only has one gas line divided by a T on one regulator so two kegs of beer will carb up and serve at the same psi. The entry hole from the tank to the inside of the kegerator only is wide enough to fit one gas line instead of two to avoid the T. Right now I have t switch the one gas line between kegs, having to adjust the psi everytime per keg for serving. Major headache. Overall a great kegerator.

Something we always wanted, went on Kegerator site and they helped us get the right Kegerator for our us. We love it !