Customer Reviews for HALO RL4 4 in. Adjustable CCT Canless IC Rated Dimmable Indoor, Outdoor Integrated LED Recessed Light Trim

[This review was collected as part of a promotion.] I really needed this downlight in my foyer. It was easy to install for it has this light socket adapter that you can just screw in and connect to the housing. I love that I have 5 selectable colors from soft to warm to cool that I can change with the seasons. Just flip a switch on the housing and the colors can be easily selected. The finish is bright white and really clean. It feels quite durable and the friction clips hold really well.

Keep switching colors on thei rown.

Poor quality Very disappointed The in-housing retention design is so poor compared to original lights, be prepared for frustration and needing to improvise i.e. glue it in. It doesn’t self center because of the poor design of the three retention prongs. Just really a piece of crap. So mad that I threw out the boxes, can’t return. Expected more from the brand Halo

Product exceeded my expectations in initial quality, much better than the lights the cheap electrician used when he installed retrofit cans. Metal housing with multiple ground options included. Let's see how long they last. I love they dim to 5% and do so without the hum my other lights made. The light they emit improves overall look of room as well as improved vision. Thank you!

The lights were easy to install. We used the existing can from old dome lights with the Halo light tension clips to hold the light in place. The trim looks great and fits snug against the ceiling in our master bathroom.

Easy to install

It's aluminum, not plastic, and the light quality is clear. The only downside is the fact that they are expensive.

This product looks good installed. HOWEVER, the mounting mechanism is CHEAP. I have over 100 of these trim kits installed in my new home and they keep falling out of the recessed cans in the ceiling. Many of these are installed where a tall ladder is needed to re-install them. What a pain. This will now be my future, re-installing fallen trim kits for the next 30 years. Halo needs to improve their design.

Easy and attractive way to add light to the shower.

Our kitchen and family room look completely different! Great addition to our remodel.

Excellent product

Really like these types of LED lights. You can adjust to color from mellow yellow to bright white. Don't have to keep looking for the right color for the room. It was also very easy to install, comes with a bulb adapter that screws into the old socket and then you spread out the 3 little tabs and push it up into the can. Only thing that was hard was had to attach the ground which was not really that hard.

Review of the Eaton HALO led recessed downlight replacement More people are now looking to reduce expenses, the LED lights can be one of those areas. Those flood lights you have in your drop ceiling or in your drywall ceilings are prime location to make a change. I have 16 of them in my basement. This LED replacement seemed to be a good option. I got rid of the halogen lights and saved a bundle. So I got 1 to try out to see how it looked and how easy it was to install. I removed the large flood light and did a trial fit. I had a difficult time trying to drill a hole in the original trim to screw down the ground wire. I finally got the hole in and secured the ground wire. Before pressing the replacement light into the light trim I got my wife’s opinion on how bright the light needs to be. This light comes with a switch that you can adjust the light color to 5 different levels. User can select from warm white up to daylight bright. The replacement light has 3 metal tabs on the top side where the wires come out. The metal tabs have to be repositioned so it holds the light in place in the original recesses light trim. I then noticed I have the 6 inch recessed light trim not the 4 inch that this unit is made for. Well my ground wire was attached so I slipped the replacement unit up into the original recessed trim. This replacement will work in the larger 6 inch housing. It will be more recessed than originally thought. My wife is pleased with the look of the light and that’s what matters to me. Bottom line: I have been saving money on replacing the old light bulbs with LEDs as I go through the house. The price on the LEDs has come down to so you can feel the savings fairly soon. The lights can be set at your desired brightness and still be on a dimmer switch to further control the lighting.

The trim is very ascetic for decor. The color function of the light is simple to use, just slide the switch on the top of the trim. Installs easily, but the support arms have a tendency to move and not let the trim to stay in place. But overall it is still a good looking and working light. Color frequencies vary from bright white to a shade of pink. Dim-ability is a plus also. You do have to ground the trim with the housing.

We had an electrician install these. He said it was an easy install. They work very well and look great. They're just a little bright at 3000k, but not so much that it bothers us. The light is very even across all 4 lights, which is not always true of a lower quality product. These definitely look like a high quality light. They also change out very easily, which is nice in case a future owner wants to change them.

Great product and easy to install (I installed 28 throughout the house). Only reason I didn't give 5 stars is that on one of the lights two of the friction clips failed; the light fell out hours after being installed and crashed on the floor - denting floor boards and the metal light rim. The friction clips are very flimsy/weak and I hope no more fail!

I like the selectable temperature color

This unit with the right dimmer is fully dimmable Really easy to retrofit on old canisters There is no perfection I have from hundreds of units installed and 2 or 3 unresponsive after installation.

This light was a great retrofit for the old can light in our master shower. it is so easy to install, really does take less than 5 minutes. After disconnecting the power, I just screwed the light socket part in, plugged that into the receptacle on the fixture, pinched the spring arms together and inserted them in the clips on the can. Power back on and we're in business! So easy! The light itself is nice and bright, and works fine with the dimmer we have in the bathroom. A little tip...The adjustable temperature is located on the fixture, and if you're like me, you might not know what temperature setting is right for your install. What I did was before installing, I attached the screw socket part to the rest of the fixture, and screwed it into a regular table lamp. After turning the lamp on, I could switch temperature settings and decide on a setting before installing the lamp.

Love the bright light that these LED retrofit kits. They emit a bright white clean crisp light thas equat to the daylight bulbs we used to buy and replace so often. With these we were told that they could last ten years or more. We are happy if they last a year. The kit installed very easy. We removed the bulb, pulled down the housing and removed it. The next thing we dod was screw in the bulb base into the bulb housing and squeezed the metal spring clamps and pushed the whole thing in a d turned on the light. Easy and fast. Great for our newly enclosed patio.

Have to finish Tiling and Trim work to complete this bathroom project. Extra lighting is not needed with these installed w a future Glass Door.

I have installed several brands of LED can light inserts. This one is unique with its selectable color temperature with 5 settings from 2700K (warm white) to 5000K (daylight). I wasn’t sure if I wanted a whiter look in a small hallway than other places. Initial installation is with 3500K selected—midway between warm white and daylight. I may switch this light to 3000K to warm it up a bit more. So this is where the selectable color pays off. The installation is fairly simple but I found the three spring clips that hold this trim in the can to be a bit problematic. The clips are meant to stay at perpendicular to the outer rim but I found that they had a bit of a tendency to turn as the fixture was inserted despite the metal dimples meant to hold them in place. One other insert I have used has spring clips attached in a different manner and they worked better to hold the insert tightly against the ceiling. Maybe that design feature should be revisited. Other than this one issue, the insert seems well designed and well made.

This is a great product. This converted my old high hats into leds. They burn cooler and cheaper. This boasts savings of up to $453 per fixture. It has a 70,000 hour life. This will run for sixty four years for three hours a day. It was easy to install.the color is totally adjustable. I was worried because I changed all my others but was short one and this fit perfectly

I had order 22 of them, very satisfying with the product. Thanks!!!

For whatever reason there is no leads for the female connecter on the light it is inset and i can not connect the light to the can.

Bought 3 of these Halo retrofits for my 3 Halo cans I have installed in my living room. All 3 had damaged boxes and were bent as shown in the photo. Came from the warehouse like that since the shipping box was not damaged in any way. Absolutely pathetic. Was not going to do a bad review but after seeing all 3 damaged, I felt this review was necessary. Was able to bend each fixture back to its (somewhat) original shape. Other than poor quality control, these lights are great and as an electrician, I do highly recommend these fixtures. Very bright and perfect for higher ceilings.

It was very easy to install

Ties in beautifully with the kitchen. Gives the right amount of brightness throughout.

I just installed 5 of these in less than 30 minutes. The ability to screw into the existing socket is the key. A dramatic difference in our kitchen and we don't have to replace bulbs in the ceiling anymore Great Product

This was installed in a ceiling over a sink and is adding so much light to the room!