Customer Reviews for Liberty 22 in. Full Extension Side Mount Ball Bearing Drawer Slide 1-Pair (2 Pieces)

Very nice and strong

Rating provided by a verified purchaser

Use liberty glides a lot. Work well and last

As long as everything is strait and square these work great! I have had some difficulty getting drawers to work smoothly if use the release and take the drawer out of the cabinet and then put it back! Most problems can be fixed by using the screw holes that are in the U shaped cutout.

these slides are easy to install and very durable.

These were the first drawer slides I ever mounted and I used them on a fairly crude workbench. The directions were sufficient and they are working fine. I am happy with the results.

My wife wanted me to fix the squeaky flatware drawer. Over the years and due to the weight of the contents, the original slides eventually gave out. These were the basic cheap roller type. Rather than taking the easy way out with the same type, I decided to try these. I added 3/4" wood spacers to each side of the inside cabinet to bring the slides out even to the opening. Since the drawer needed to be narrower now, I decided to make a new drawer to take advantage of being able to make it 4" longer. Everything went together easily and it works great. The only problem with these slides is that my wife liked it too much and know she wants the same on all the other drawers. -- Yes Honey, I can do that.

Exactly as it should be. Sturdy and sinch to install

only thing I want to add is that I should have bought a longer one. the slides should run the full depthof the drawer.. as first timer, I was conservative. now I have the deeper part of the 22inch drawer hard to reach. my bad. hope I'm the only one

I am building a set of custom cabinets and in these cabinets is 1 drawer per side. I have broke 2 rails thus far and lets just say im 17 years in the industry and im getting very frustrated with the quality of everything. I mean 5 bearings popped out of 1 side from the flimsy tabs holding them in anf the other rail broke at the lever part to engage the soft close. So i would say if anything were to go wrong these two things are the most common. Luckily for me i experienced both. Good luck!

Easy to install, clear directions, smooth operation

Met expectations. This is a good quality, well designed product. A bit pricey but this is a top of the line world class product. There are other designs available for less cost but they sacrifice fit function quality and ease of installation.

We purchased a pair of these for our kitchen flatware drawer last weekend. It took the better part of the day and 2 trips to Home Depot to get the job done. During the installation, we went back for the bracket that holds the far end up (our cabinets don't have side walls close to the drawers in many places), and decided to pick up a second pair for another drawer. Really glad we did. After we got the first one installed, we couldn't get the drawer all the way shut, and the self-close mechanism wasn't working at all. Luckily, with the second in hand, we could see what went wrong and correct it. So, the slide is fine, and the closing is fine. Getting the drawer open is another story. Our drawers do not have pulls, instead they have lips to grab with your fingertips. I practically rip my fingernails off every time I open the drawer. So, I think if you have drawer pulls, you will like these just fine. We will be returning ours, and continue our search.

Rating provided by a verified purchaser

Great product with clear instructions. Finished job produced smooth-gliding drawers.

The slides work as they should, so far. It's only been a week. I had problems with the screws that were supplied with them. Phillips head screws that stripped out fairly easily. A fairly cheap but necessary component of the unit. No excuse for not having better quality. I finally made a trip to ACE for some replacements.

The undermounts work nice , I chose them for the smaller top drawers I built for an armoire. With a 12 " width or less you can use one. No wobble as long as the drawer is fitted right. The advantage is you don't lose any space on the sides. And the 3/8 inch required to mount them is a minimal loss of space for the height.

These slide are extremely well made and work flawlessly. They extend smoothly and completely, are nearly silent, and the disconnect mechanism is simple and works well. I think the only reason for the few less-than-stellar reviews must be that people are not taking the time and care to install the slides properly. If you follow the simple and well-written directions and measure carefully, you will get perfect results in less than 30 minutes. I can't say enough good things about these slides.

As expected

I had to acquire the 18 inch model; am very satisfied.

After a couple years of having these not work I finally replaced them with the original slides. Drawer would often jam slightly open. I tried adjusting them dozens of times with no luck. I have Kraftmaid cabinets.

I'm fully satisfied with this product. Thank you

I bought these slides to replace a rather expensive drawer set that came with cheaper slides. The originals attached to the sides and were a nightmare to install without binding. Since my application was for a bottom drawer I merely attached these to the base of the drawer and the bottom of the cabinet. Easy slides now with the heavy liquids stored on the bottom drawer.

These are great slides, if they are installed correctly. I use the Liberty bracket kit ( D8065SEC-W-D) and they work great every time and I have installed several of these. I am buying 6 more today.

These slides are well made and quite durable. However, I purchased 8 pair of these and 5 were square and flat along the top (perfect for setting a level on) and the other 3 were beveled along the top and level wouldn't sit flush. Hardly a reason to pass up on a great drawer slide, just wanted to give a heads up

Very easy to install both parts of the slide. Easy to disconnect to remove the drawer. The drawer work smoothly empty and when full. Installation only a matter of minutes. Very nice product for the price. Will purchases drawer slides again.

The drawer slide is heavy duty as represented and does allow full extension of the drawer as I needed. However, to completely close the drawer the last half-inch or so, it requires what I think is too much pushing on the drawer. I would have expected the drawer to close more easily at the very end of its slide. For that reason, I rated it average.

I purchased 6 sets of these slides for a tool cabinet that I built for the garage. I chose these slides over some less expensive ones for the 100 lb. rating and heavy duty requirements. Easy to install and work great!

Used to repair keyboard tray on my desk. good quality slider!

I had no problems installing the drawer slides. Excellent quality