Customer Reviews for Milwaukee 1-3/4 in. x 23 in. 4-Cutter SDS-MAX Carbide Drill Bit

Good, but expensive

High quality bit. Drilled two holes through 10 inches of concrete in only a few minutes. Still as good as it was when new.

Very nice to used I like the drill bit it’s really good

Tip broke off after 12 holes

Worked like a charm!!

Broke the head off on the 1st hole.

THE DRILL BIT WORKED FANTASTIC FOR US. GREAT PRODUCT

Bores right through rocks.

Bought to use with a hammer drill so that I could drill pilot holes for t-posts. This works great for that task since the t-post is under 1 1/2" wide. I drilled holes to the maximum depth of this bit and then stuck the posts in the hole and pounded them a couple times to seat them in the dust. My area has rock at the surface so building fence requires drilling holes and this bit worked great. It is long enough to be able to set the post at the proper depth for stability.

It did not work as good as I thought it would. It was not an easy drilling process on my project.

We drilled sixty holes in a warehouse to anchor pallet racking and it could still do more.

Works as it should thank you

Here is the great and okay for this drill. With a hammer drill it went thru foundations in like 45 seconds. The bad is that it’s just a 1/4” short to go thru a 10” foundation when installed into the sds max hammer. They should have made it 1” longer to do the job on a standard foundation wall. That’s why the 4 star

The Milwaukee bits are no where as good as the Bosch bits! The Milwaukee bits are to prone to be grabby and constantly getting stuck in the stone.. I plan to return the two Milwaukee bits back to the store and hopefully have the applied back to my Home Depot credit card.