Customer Reviews for Milwaukee 3/4 in. x 12 in. 2-Cutter SDS-PLUS Carbide Drill Bit
- Durable steel construction
- Removes dust from hole for efficient drilling
- Fast drilling through all masonry materials
Customer Reviews
May 1, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 30, 2020
The bits drill very easily an clean
The bits drill very easily an clean
by
Apr 30, 2020
It did job that it intended for....
It did job that it intended for.
by
Apr 23, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 22, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 21, 2020
Cut right through our block wall with no problems.
Cut right through our block wall with no problems.
by
Apr 21, 2020
Drilled through 12" of foundation, no problem!
Drilled through 12" of foundation, no problem!
by
Apr 21, 2020
much better bosch drill bits...
much better bosch drill bits
by
Apr 21, 2020
Surprisingly tough drill bit...drilled about 60 holes for thresholds and had no problem...still h...
Surprisingly tough drill bit...drilled about 60 holes for thresholds and had no problem...still have it in my tool box ready to go
by
Apr 18, 2020
good for drilling paper
These bitsare absolute junk. I used them to drill holes for some tapcon screws to a basement subfloor. I bought 2 of them just incase. The first bit’s tip rounded into a ball after the 6th hole. Switched to the second bit and it snapped after the third.
by
Apr 16, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 16, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 15, 2020
Looks like it fits a standard drill chuck but it...
Looks like it fits a standard drill chuck but it didn't.
by
Apr 10, 2020
I run this bit around 100 holes. I`m happy with...
I run this bit around 100 holes. I`m happy with that .
by
Apr 10, 2020
Worked great, best price with brand quality out there. ...
Worked great, best price with brand quality out there. Needed the hammer drill for concrete work, spent a whole night using a regular electric drill, didn't know about hammer drill, got this, and did the job in minutes. Unable to put the measuring metal bar in, will have to figure that out.
by
Apr 8, 2020
These bits are made specifically for drilling in concrete, block, or brick, using a rotary hammer...
These bits are made specifically for drilling in concrete, block, or brick, using a rotary hammer/hammer drill. They work very well in that use. Takes me less than a minute to drill a 1-1/2 inch deep hole in concrete to place an anchor.
by
Apr 8, 2020
It did not cut through the cement I had
It did not cut through the cement I had
by
Response from Milwaukee ToolMay 5, 2020
Thank you for posting a review and we’re sorry to hear that your experience was not of the quality you expected. We would like the opportunity to investigate your feedback further. Could you contact me at socialmedia@milwaukeetool.com? Thank You. -Jacob
Apr 8, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 7, 2020
drilled holes into 50 year old concrete like butter
drilled holes into 50 year old concrete like butter
by
Apr 7, 2020
the drill Bit went right through 8 holes without slowing...
the drill Bit went right through 8 holes without slowing down.
by
Apr 3, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 2, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 1, 2020
After 36 penetrations with a single bit, it remained flawless and without compromise. We even enc...
After 36 penetrations with a single bit, it remained flawless and without compromise. We even encountered a couple strings of rebar!
by
Apr 1, 2020
This drill bit went through concrete real easy ...
This drill bit went through concrete real easy
by
Apr 1, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Apr 1, 2020
These are made specifically for rotary hammers/hammer drills. I use mine with a rotary hammer ba...
These are made specifically for rotary hammers/hammer drills. I use mine with a rotary hammer band it works great. Drills fast and with little effort in concrete, concrete block or brick.
by
Apr 1, 2020
Is good ...
Is good
by
Mar 31, 2020
Functioned as expected...
Functioned as expected
by
Mar 31, 2020
Cuts like butter...
Cuts like butter
by
Mar 31, 2020
solid cement drill bit. ...
solid cement drill bit.
by
Frequently Bought Together
Price:
$26.37
