#1 Home Improvement Retailer

Customer Reviews for Palram Lean To Grow House 8 ft. x 4 ft. Silver Hybrid Greenhouse

Internet #301113358

Model #704052

  • Polycarbonate panels for UV protection and all-weather use
  • Powder-coated aluminum frame with steel connectors for strength
  • Lockable sliding doors and top vent for comfortable gardening

Customer Reviews

  • 3.1
    out of 55 reviews
  • 50% recommend this product
Filter by:
Showing 1-10 of 55 reviews
Thin plastic. Bad construction
Our contractor sent pics to tech support and they couldn’t help us. (They were very nice) Holes machined in wrong places. Do NOT try setting it up on a day with the slightest breeze. Very thin plastic. We had to “jury-rig” quite a bit. Pieces not labeled clearly or not at all. I’m waiting for a good wind storm to take the whole thing down.
by Jb
I highly recommend the 6'x8' greenhouse it is Fairly easy to assemble and when completed it is a...
I highly recommend the 6'x8' greenhouse it is Fairly easy to assemble and when completed it is an excellent product.
by Greenjeans
The wife loves it, built sturdy, not the easiest to put together, an impact driver a must, wall t...
The wife loves it, built sturdy, not the easiest to put together, an impact driver a must, wall to floor very important to be square.
by Ran4157
Absolute garbage
First, there were maybe 50 dollars worth of parts and that's being gracious. the walls and roof are made of what seems to be dollar tree tupperware plastic. instructions are not the best and design is ruthless requiring 8 hours to assemble and at least 2 people. there were a few times we needed 3 people. I had anticipated it so much and with delivery dates continuing to be pushed back, I unboxed it and quickly began building out the frame with paying any attention to the quality of walls. by the time I got the frame built and got to the walls, I was too far invested to tear it down and return so I just pushed through. The pictures of this product are very deceiving. I knew the size and am in no means criticizing that because I was fully aware. My wife even loved it when she saw the finished product because not knowing the quality of material, she was oblivious to the fact this is an extremely cheap product. Even my pictures look good but don't be fooled. This will not survive any misuse. I would honestly be surprised if it lasted a year. And if your thinking, oh no problem; it has a warranty, think again! It is such a hassle to assemble with hundreds of pieces that I am sure I will burn it before I warranty it. I could have saved money if I just bought 2x4's and some poly sheets and it would have been much nicer and easier to build. note to self, inspect quality of material before engaging in a timely project. My fault on that, just don't let it be yours too for not reading this and taking it seriously. You have been warned.
by DLaws
5 people found this helpful
Overall pleased with this product. Couple of issues with...
Overall pleased with this product. Couple of issues with the steps involving the top of the door area, but not too difficult to assemble.
by HomeDepotCustomer
3 people found this helpful
measure twice cut once
Had issues during the whole assembly. Becuase the base frame you start with was not properly cut to the right length. Didnt figure that out till i got to the door at the end. Door frame wasnt square when i assembled. So i had to leave a finger width gap on the existing wall side for proper fitment. Had to compensate a block of wood to close the gap and provide a strong corner mount. Off about a whole 1 inch. Also i was unaware you had to provide an existing wall for the tallest side. Wife and I spend 4hrs to comeplete assembly and another several hours to build “an exisitjng” wall. Photo is without wall. This is not a one person job. Wind will destroy progress
by hergreenhouse
1 person found this helpful
Very easy to assemble. This is the 3d kit I have assembled and by far the easiest! The kit would ...
Very easy to assemble. This is the 3d kit I have assembled and by far the easiest! The kit would be benefited greatly structurally if diagonal cross members were added to the kit. I plan on doing that with mine.
by Rob
6 people found this helpful
We received our box with loose parts and we were...
We received our box with loose parts and we were missing an important piece. Six weeks later, we are still waiting for a part to arrive. It’s been very difficult to get a hold of customer service and to nail down an approximate time to expect our piece. It’s been a very frustrating back-and-forth so I hope that this all gets worked out and I can come back and change my review. I was hoping to buy accessories for the greenhouse but I’m hesitant due to the issues we are experiencing currently.
by ADRIENNE
Response from Palram Product ExpertMay 31, 2021
Hi Adrienne,
Thank you for taking the time to reach out. We are sorry to hear you were missing parts of your Lean to Greenhouse. We would love to help speed things up and resolve this as soon as possible. if you have any further concerns please don't hesitate to give us a call at 877-627-8476 Monday through Friday 8-4:30 MST, or send us an email anytime at customer.service@palram.com. PalramApplications
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
The manufacturer’s parts don’t align or fit properly. We got...
The manufacturer’s parts don’t align or fit properly. We got through half of the building process only to tear it back down and return it because pieces did not fit together properly.
by Zoey
Response from Palram Product ExpertApr 29, 2021
Hi Zoey, we are sorry to hear about the assembly difficulties with the Lean to Greenhouse.
a case such as mishitting parts shouldn't happen and we would love if you could share your experience, so we could understand what went wrong.
please give us a call at 877-627-8476 Monday through Friday 8-4:30 MST, or send us an email anytime at customer.service@palram.com PalramApplications
Showing 1-10 of 55 reviews