Customer Reviews for RYOBI ONE+ 18V AirStrike 18-Gauge Cordless Cordless Narrow Crown Stapler

One of my favorite tools in my arsenal as a novice DIYer . Was choosing between this and the brad nailer. This is so much more functional and versatile. Able to drive staples Ranging from 3/8 in to 1-1/2 in with no issues across the board. Easy adjustments And I especially love the machine gun style trigger option that allows you to just hold the trigger depressed and Move on to the next target. Fired a couple hundred 5/8in and 1.5in Staples into a project. Ran seamlessly.

[This review was collected as part of a promotion.] Bought to replace seat webbing on antique settee!!

I received the about one year ago and have used for multiple projects. I am amazed at the power of the drive and life of battery. Used multiple types of wood and this stapler has no problem keeping up.

Works for what I am needing. Just completed a wall. Project worked better then brad nails.

Great product! Shot off about 750 staples so far with no hiccups. Has option of single shot or rapid fire with a flip of the switch. Great for the chicken wire panels and nesting boxes I am building.

Wow!! I was hesitant about buying this product as I had planned on an air model and hadn't read any reviews on this. All I can say is wow! This thing is incredible. I put down 500 sq ft of 5mm subflooring with this, not 1 staple was above floor level. Highly recommended.

I bought this product to build my chicken coop to attach the wire and some of the wood. It's been a staple product in my Ryobi lineup ever since.

I bought this gun for installing 1/2" plywood underlayment with 1 1/4" staples. I was shooting it to old 3/4" subfloor boards. It worked flawlessly. I nailed off a 4x8 sheet on a small battery. Total square footage is approx 75 sqft. I shot about 700 staples. The bump feed worked better than I expected. Especially with the big battery.

This is a must have tool for me. Has almost as much power as my hose driven stapler. It's powerful enough to do 99% of the work I need to do. If it's a hard wood or some other rare situation I'll grab the other but this one rocks. I have the Ryobi15 gauge and the pin nailer and they are all good.

We started building balusters and purchased finish nailer for dry build. It works great and recommend it for all the wood workers.

Unable to use my pneumatic nailer for a retro (solid 3/4”) hardwood floor install, I purchased the Ryobi unit with low expectations for performance. I couldn’t have been more wrong. The unit fired in excess of 1500 staples on one batter. I had to dial back the impact force to prevent over-penetration. The results have been nothing short of perfect.

Bought the 18v stapler to have around the house. Then we decided to remodel the inside of our farm house.The stapler made the job of installing beadboard in both our bathrooms quick and easy. The remodel of both bathrooms tuned out fantastic. Thanks to the Ryobi 18v one+ air strike 18ga narrow crown stapler.

Bought this so that I didn’t have to carry around the air compressor. Now I can replace the windows on my deck with only one handheld tool. It worked perfectly!

Efficient and easy to use. Another great addition to my One+ collection!

This stapler is great. I keep in in the car and use it in store parking lots on those discertious drivers car tires who cut me off and take the spot I was going for.

I love the Ryobi brand overall. This is a new tool for me to use, so maybe it's just me, but I have had to take it apart twice because the nails get jammed in the slider mechanism. Otherwise seems to be a good product.

[This review was collected as part of a promotion.] I bought this nailer for a chicken coup build, worked flawlessly with 2” and smaller nails. I only wish I’d gotten it sooner, would have made building the roost much easier as it was made with smaller lumber that split easily with screws. I used the nailer all day on my project without a battery change using the P107 1.5Ah battery. At any rate this is my go to tool for working with smaller lumber like plywood and trim, 1000 times easier than screws and you can get into some tight spots that would be a pain otherwise.

I used this tool to replace the cedar shingles on our gazebo. What a great stapler. I used 11/2 in and 1inch staplers and never had one jam. This tool was well worth the money.

[This review was collected as part of a promotion.] I bought this a month ago and I'm so happy I did. I love Ryobi tools and apparently other guys do too, there was a man buying the same tools I was! It worked GREAT on the job I completed! Just put some wire fence around some posts for an impromptu turtle enclosure.

[This review was collected as part of a promotion.] I picked one of these up a few years ago just to see if it would even work for me. I am a general contractor and a finish carpenter. I have use nail guns my entire career "I am 50" I have lots of uses for a nail every now and then. This gun has filled all those needs and then some. First job was a set of maple stairs. It was amazing not having to deal with the air lines up and down the stairs as I worked. I have since picked up another as well as the stapler. It does not take long to figure out how it works sure it is big and bulky but the trade off is WELL worth it. Not having to fire up the compressor in a clients house is priceless. Still working well after 2+ years

[This review was collected as part of a promotion.] I got into reupholstering and been looking for a strong and efficient staple gun. I love my Ryobi brand and was very excited to add this tool to my collection! I can easily reupholster a chair in just a few hours with this staple gun!

Bought this product after reading reviews and completely satisfied have used both inch and a half and 1 inch staples not one problem I would recommend this product

Wow, this is my new favorite tool. I needed it to repair some carpeting that was pulling up after a remodel dislodged it. This tool sure makes trim & carpeting work easy. It took 20 minutes to do what might have taken 5 times as long and the result is perfection. I'm very happy!

After researching and buying inferior staplers, this Ryobi model surpassed all others in terms of performance, power, and portability. It was well worth the extra dollars.

[This review was collected as part of a promotion.] I bought this because I can't buy staples that fit my old staple guns. WOW I am impressed, it is an awesome product. So many great features my old guns didn't have I will most likely get a 2nd one.

[This review was collected as part of a promotion.] Powerful replacement for air tool but not ideal for small spaces and tight angles. I used this on RTA cabinets and the strike nose was bigger as expected so not able to use effectively on angled joins.

Love this stapler. No plug, no electricity needed. On the go, it's a must.

Nice stapler, just what I wasclooking for. Another great product to add to my Ryobi tool arsenal!

[This review was collected as part of a promotion.] I bought this a month ago and I’m so happy I did! A must have for a DIY’er