Customer Reviews for VIGO Elan 56 to 60 in. W x 74 in. H Frameless Sliding Shower Door in Matte Brushed Gold with 3/8 in. (10 mm) Clear Glass

The Elan Cass shower is well-built with the hardware providing a really cool modern industrial look. The assembly and installation went well and there are valuable adjustments you can make using the roller wheels and bar end caps to mitigate walls that aren't level. Very happy with this purchase.

Would have given 5 stars, but product came with only one stopper and screws to secure pole to wall were way too short 1 5/8. My wall thickness was 1 1/8 (tile plus backer board plus thinset). I also feel the instructions could use improvement

A great looking product. Very nice material and adjustable components make for an easy, flexible installation.

The glass is very heavy which makes it more difficult to install by myself, but the way that the door rolls on the top rail is very smooth. You can definetly tell that it is high quality product. The best thing about this line of doors is that they make many different sizes that easily fit different shower openings.

We bought it 6 months ago and love it.

We love these doors! We waited longer to get the 74 inch doors and are so glad we did, so that a taller person doesn't have to duck under the track. The doors are beautiful and slide smoothly. We did not install the threshold, because we put in a zero-threshold shower and wanted no obstruction on the floor. Our floor is sloped to a linear drain and we have had no problem with any leakage under that door. Before the first use, we did apply a product on the doors to help reduce water spotting. That is one thing we wish the Vigo doors had applied at the factory. Highly recommend these shower doors!

Happy with purchase. Item was as described and easy to install.

Great installation by Plum

Best way to complete the look of a shower and I love it.

Our lovely frameless sliding shower door is really beautiful. It glides so effortlessly and is easy to clean. The matte gold metal finish goes well with the brass finish faucets and light in the bathroom.

Awesome frameless shower door, my wife and I love it in our newly remodeled master bath.

Smooth glide. Door is sturdy and quiet.

Looks very nice, slide smoothly

We bought this a month ago and it has been installed and in use for a few weeks. We LOVE it! It is a beautiful addition to our shower. So happy we chose this door!

The installation was good, a few hiccups but overall pretty straight forward with great results

Quality product. The directions could be a little easier to follow but found a video on you tube which made it easier. Very well made and looks amazing.

Got it installed and it just looks beautiful. Timeless elegant.manly and modern exactly the style I was going for

I was very happy with this shower door until it exploded in the middle of the night. The movable side of the door shattered in millions of pieces. My contractor installed it perfectly. He has done a lot of work for me and everything he does is excellent. Vigo thought this may have happened due to installation. It was installed in Oct 2021 and was fine until July 2022. I am happy Vigo will replace the door but I will have to pay for installation.

I love this shower door! It's very thick high quality glass with a smooth gliding function. This looks way better than the custom one I almost bought. Installation was a little tricky, but well worth it! You won't regret this purchase - looks custom, feels custom, but costs less.

I have had these fabulous smokey sliding glass shower doors since December. They just add a special flare to my bathroom. You get what you pay for.

I bought this for an overall bathroom remodel. I wanted something modern, stylish and as frameless as possible. It also had to accommodate a pretty small opening to the shower, due to the location of the toilet. I really couldn't use a swinging door of any type. The delivery was probably the most hair raising event. It came on a Fedex truck and was shipped lain across two separate pallets. The truck driver was alone and had to manage this thing our of the truck to the liftgate and into my garage by himself. The fact that it was on two separate, disconnected pallets became immediately obvious as you could see the package bending slightly, in the middle, whenever one end was hanging off the hand truck the driver had. It hung over the end of the liftgate all the way to the ground and I was pretty certain that glass was broken inside. But, I took pictures, just in case, and opened it immediately to find the very thick and rugged 3/16' glass components were intact and unscathed. Most glass for this application is only 1/4' thick and I have had panels just explode in my hands from setting them down funny on a hard surface. These could even be bullet proof....just kidding.... I chose to install it myself, with help from my son. I am an experienced DIYer and tend to ignore all the "get a professional to do it for you" advice in the instructions. It was one of the more intense installations I have performed myself but after looking through the directions several times and examining the components, I was confident I could handle it. We took the first day to just get everything measured and all the holes drilled and mounting brackets installed. I just installed a new cast iron shower pan and had no intention of drilling into that thing, so the VIGO-supplied door guide and bottom support bracket needed to be epoxy glued and dried before proceeding any further. Probably the most notable hassle was the wall seal applied to the fixed glass pane. Against the freshly tiled walls, it was almost impossible to move around with ease and made getting the fixed pane plumb and the support bar positioning hard to accomplish. One caution in the instructions is absolutely true: you have to have two people to move these panes of glass around. They weigh like 125 lbs each. I bought some professional glass handling suction cups to assist. In the end, we were able to get everything positioned and plumb, marked all the holes that needed to be drilled and the locations of the door guide and bottom support bracket. I also added an additional side support bracket, just to make me feel better about the pieces on the shower pan being glued and not screwed in place. Day 2 was just bringing in the fixed pane and fastening it in place and hanging the door. I will say that the instructions to disassemble the rollers for mounting were very unclear. We looked at those things for a bout 20 mins before we figured out the covers screwed off to gain access to the allen screws. But it was pretty straightforward, after that. Just about everything you have to bolt down on this door has some degree of adjustment built in, which is super handy. It helps you get the fixed pane plumb by giving you some adjustment on the support beam. The rollers have similar flex, allowing you to adjust the door if your wall isn't plumb. We used every single available adjustment and the door looks and operates very smoothly.

Bought this a month again love my door

Love the sliding shower doors in my remodeled guest bathroom. My contractor installed the doors easily, No issues. He liked them too. Nice modern look. Only thing that would make it even better would have been a proper matching handle on the inside of the door as the outside. It only has a knob on the inside to open it.

very happy with this purchase

I bought this after seeing a frameless bypass door at a Marriott. This is a top-quality door that makes your shower jump up a couple of levels. Only a couple of things to know. 1. It's heavy...you will need an assistant to help you (my 32 yo son helped me). 2. The included mounting screws are pretty short. You'll probably need to buy a box of longer good quality construction screws. 3. The instructions are really not that good, watch the video. Even then, there are a few things that are ambiguous, so take your time to avoid making a mistake. Study the instructions and video a few times to get comfortable with the installation. If you are good at DIY projects, you can do it yourself. On the sliding door side of the mounting bar I recommend using two screws (one at the top of the channel on the mounting plate after you've got the bar installed, and one in the middle or at the bottom), not one, to ensure the security of the bar. The fixed panel side is supported by that panel, so one will suffice there. When you first temporarily install the fixed panel and then mark the location of the pole mounting bracket, don't count on the fixed panel to hold the pole level. Instead, after you scribe around the fixed panel side bracket, then use a level as you mark the location of the pole on the sliding door side. Otherwise you are likely to be too low and you will have to make an adjustment later.

We just installed this on our DIY master bath remodel. We read dozens of reviews for extra tips on installation. My husband is a professional-level diy-er, so he didn’t have much trouble once he got two strong guys to help with the holding and hanging. We love it! My only slight regret was looking to see if Vigo made a taller model of this, since my husband is 6’6” and has to duck under the bar.

Purchased VG6041CHCL7274 for our upscale short term rental unit. Not too difficult to install but directions did not show hole size to be drilled for support bar (did have hole size for other brackets). Also, the steel threshold is held on one end by inserting into bottom door glide and only secured by silicon on the rest of it. There needs to be a bracket similar to the fixed door bottom bracket so the threshold doesn't move. Not a lot of adjustment with the anti jump rollers so we added thicker o-rings that provide a little more friction to keep the door from moving. Overall, a good product that should last quite a while.

Really love our sliding door. Slides smoothly and looks gorgeous. My only minor complaint is that water does splash out a little from under the door but no enough to be overly concerned about.

Bought this for new tiled shower as part of bath reno. Unfortunately my contractor screwed up the install by placing the sliding door 2” outside the bottom rail, creating a gap where water can exit at the bottom. Shower isnt usable if it wets the floor everyday. Ugh! I dont even know who to contact to fix it or how much its going to cost. I paid the guy before I realized the error but may try to sue him if I cant get reimbursed for this. Door is perfect but definitely need pro to install it. See the ridiculous install below:(((

We needed a custom cut for our opening. When we started shopping around our research led us to believe this was a quality product with an excellent price point in comparison to other door options.