Roller Assembly, 1-1/4 in. Tandem Wheels, Concave Edge, Steel Ball Bearings, Adjustable
This is a unique housing tandem roller assemblyThis is a unique housing tandem roller assembly often found on Andersen patio sliding doors as well as a variety of other manufacturers of wood sliding patio doors. It has two 1-1/4 in. concave steel ball bearing rollers set in a stamped steel housing with side adjustment. The housing is 11/16 in. wide, 1-3/16 in. tall and 4-5/8 in. long with 1 mounting tab at both ends of the housing. When the housing is inserted into the mortised area in the bottom rail, screws are used to fasten it in place.View Full Product Description
Roller Assembly, 1-1/4 in. Tandem Wheels, Concave Edge, Steel Ball Bearings, Adjustable
This is a Plain Back tandem roller assemblyThis is a Plain Back tandem roller assembly used by a variety of patio sliding door manufacturers of metal or vinyl framed patio doors. It has an in-line tandem inner housing with 1-1/4 in. concave or grooved steel ball bearing rollers set in a stamped steel housing with rear adjustment. The housing is 1-1/32 in. tall, 11/16 in. wide and 3-1/8 in. long with a 1/4-20 threaded mounting hole on the back end, and an optional use hole on top.View Full Product Description
1-1/8 in., Steel Ball Bearing, Tandem Roller Assembly
This is a plain back tandem roller assemblyThis is a plain back tandem roller assembly with two 1-1/8 in. concave steel ball bearing rollers. The stamped steel housing is adjustable and used by Milgard as well as a variety of other manufacturers. Primarily used on vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall with a 1/4-20 threaded mounting hole on the back end and an optional use 10-32 threaded hole on the top.View Full Product Description
1 in., Screen Door Tension Spring with Roller, Academy (2-pack)
This is a tension spring roller assemblyThis is a tension spring roller assembly with a V-spring design used by Academy and a variety of other sliding patio door manufacturers. The roller is a 1 in. high-density polyethylene roller with a 1-3/4 in. long tension spring that is a heat treated steel spring. When installed the bent, or angled, flat spring positions the roller assembly so that an adjusting screw adjusts the height of the roller as needed. For stainless steel roller assembly use Prime-Line part B 756.View Full Product Description