Hidden deck screws for any board.Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place.Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system. Available in PROTECH exterior coating and 316 stainless steel.
For use exclusively with the CAMO MARKSMAN system
Fastens on the edge of the board, for a fastener-free deck top
Hidden deck screws for wood and composite deck boards
316 Stainless steel offers maximum corrosion protection and is suitable for cedar, pressure-treated lumber, hardwood, PVC, composite or synthetic boards
Edge installation reduces splitting, cracking, and maintenance for a barefoot approved deck top
Most materials do not require pre-drilling
Rake tip augers material from the hole, preventing the deck board from splitting and cracking
Aggressive lower threads hold the deck board to the joist
Reverse upper threads hold the deck board in place
Trim head to seat the deck screw below the deck surface
T15 star drive is designed for strong bit engagement
T15 star drive bit for square boards included in every pail, grooved bits sold separately
Predrilling is recommended for hardwood and capped PVC boards, see the CAMO predrill bit
Was easy to install. Gives my deck stairs that seamless invisible look I was looking for.
Was easy to install. Gives my deck stairs that seamless invisible look I was looking for.
by
Verified Purchase
Recommended
Sep 16, 2022
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Oct 7, 2020
Great simple easy to use system with their tool. Leaves a little bit of a burr at times in capped...
Great simple easy to use system with their tool.
Leaves a little bit of a burr at times in capped decking trhast calls attention to the screw holes in the side of the boards.
Screws are not poinyed so they walk big time if you try to free hand without their tool or pre drilling
by
Verified Purchase
Recommended
1 found this review helpful
Jul 22, 2020
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
Verified Purchase
Jul 18, 2017
They break
They go in great! A year or two later, they break. Warranty is worthless. Save your money.
by
Recommended
2 found this review helpful
Jul 7, 2017
I have been planning to update my deck for the past 6 months and did a lot of research about whic...
I have been planning to update my deck for the past 6 months and did a lot of research about which products to use. I finally settled on CAMO and couldn't be happier. It's a fantastic product and was so easy to use. I used it to install my new IPE deck and the finished result is awesome. The entire process was so easy even my 7 year old daughter was able to help.
Also, I am a big online review guy and checked countless reviews before finally deciding to use CAMO. One of the reviews for this product appears to be a bit confused so I suggest discounting it like I did. The reviewer seems to think all the tips of the screws were missing from his product. That is how they are supposed to be. None of the CAMO screws should have points because they have an auger tip, so the missing screw points is really nothing to worry about. The screws work fine just how they are with a flat tip. So BeachChef...you might want to actually read about the product you are using prior to rating it.
by
Recommended
4 found this review helpful
Jul 6, 2017
What a poor quality screw ! I even predrilled my holes like the instructions recommended. Tap Eas...
What a poor quality screw ! I even predrilled my holes like the instructions recommended.
Tap Ease screws are better quality for about the same price. Not sold @ home dep.
by
1 found this review helpful
Jun 27, 2017
This product had no point on it. Every single screw was defective. Obviously quality control wa...
This product had no point on it. Every single screw was defective. Obviously quality control was on a serious break when these were supposed to be inspected. I ordered these specially for a project I was doing near salt water. I delayed my project for several days until the screws showed up. A basic operation of putting points on the screws was not done and the screws were junk.
I have since returned the screws and gotten my money back. An extreme waste of time and money.
by
Verified Purchase
Nov 12, 2013
Great Product
Actually used these on a tongue and groove floor for a 100+ year old porch replacement. I wanted a stainless product that I didn't have to predrill each hole for, and this worked perfectly. Did a great job. Not the first split in the wood. My contractor had not used them before and was astonished with the results.
1-7/8 in. 316 Stainless Steel Trimhead Deck Screw (700-Count)
Hidden deck screws for any board.Hide yourHidden deck screws for any board.Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place.Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system. Available in PROTECH exterior coating and 316 stainless steel.View Full Product Description
2-3/8 in. 316 Stainless Steel Trimhead Deck Screw (350-Count)
Hidden deck screws for any board.Hide yourHidden deck screws for any board.Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place.Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system. Available in PROTECH exterior coating and 316 stainless steel.View Full Product Description
2-3/8 in. 316 Stainless Steel Trimhead Deck Screw (700-Count)
Hidden deck screws for any board.Hide yourHidden deck screws for any board.Hide your deck screws with the CAMO MARKSMAN system. Any wood or composite board in any square or grooved board profile, Edge hidden deck screws are the best way to enjoy the beauty of your deck top without seeing your fasteners.Edge hidden deck screws are installed on the edge of the deck board, hiding the fastener while protecting the face of the deck board. The rake tip design of the screw augers material as it is driven, leaving you with a fastener free deck surface that is less prone to splitting and cracking.Not only does this system improve the overall look of your deck, but it holds stronger than a traditional face fastener. When a deck board is face fastened, the head of the screw or nail is keeping your board in place. Edge hidden deck screws leverage the strength of the entire screw to hold your deck board in place.Edge Hidden Deck Screws are easy to install using either the CAMO DRIVE system or the Marksman system. Available in PROTECH exterior coating and 316 stainless steel.View Full Product Description