#1 Home Improvement Retailer

Internet # 317978083

Model # WPS07504K

Store SKU # 1006670237

PRO 3/4 HP Heavy-Duty Cast Iron Shallow Well Jet Pump

$299.44
Apply Now
Pay $274.44 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • PRO heavy-duty cast iron construction
  • Applications for water depths up to 25 ft.
  • PRO performance with up to 19.5 gal. per minute and 72 PSI
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

Engineered for superior performance, the K2 Pumps PRO 3/4 HP Cast Iron Shallow Well Jet Pump will pump up to 19.5 gal. per minute at 40 PSI and a maximum pressure of 72 PSI. The pump can be used for shallow well applications with water depths up to 25 ft. This may include drilled wells, driven wells, bored wells, creeks, lakes, ponds, and other water sources when the distance to the water is 25 ft. or less. Typical applications would be water supply for homes, cabins, farms, low flow sprinkler systems, and utility water.

Highlights

  • Heavy-duty, dual voltage, 115/230V motor is preset at 230 volts and has a built-in voltage switch for easy conversion to 115 volts; see instructions
  • Capacitor Start Induction Run (CSIR) motor design ensures higher starting torque
  • Mechanical seal and stainless steel shaft
  • Pre-mounted 30-50 pressure switch for automated operation
  • 1-1/4 in. NPT suction and 1 inch NPT discharge
  • Self-priming after pump housing is initially filled and foot valve or check valve is installed
  • Certified to NSF/ANSI CAN 61 Standard for Safe Drinking Water and NSF/ANSI 372 Lead-Free Standard
  • 3 year warranty
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 317978083

Model # WPS07504K

Store SKU # 1006670237

Specifications

Dimensions: H 8.8 in, W 19.3 in, D 10.4 in

Dimensions

Product Depth (in.)

10.4 in

Product Height (in.)

8.8 in

Product Width (in.)

19.3 in

Details

Amperage (A)

15.8 A

Cord Length (ft.)

0 ft

Discharge Flow 0 ft. @ 40 PSI (gallons/hour)

1170

Discharge Flow 0 ft. @ 40 PSI (gallons/min)

20

Discharge Flow 25 ft. @ 40 PSI (gallons/hour)

600

Discharge Flow 25 ft. @ 40 PSI (gallons/min)

10

Features

Self-Priming

Gallons Per Minute (GPM)

19.5

Head Pressure (ft.)

25

Housing Material

Cast-Iron

Impeller Material

Reinforced Thermoplastic

Included

Hardware

Inlet Connection

Threaded female

Jet Pump Product Type

Shallow Well

Maximum Horsepower (hp)

3/4

Maximum Pressure (PSI)

72 PSI

Maximum Working Temperature (F)

95

Minimum working temperature (F)

32

Number of Impellers

1

Outlet Connection

Threaded female

Pack Size

1

Power Type Required

AC

Product Weight (lb.)

37.4 lb

Pump Switch Type

Switchless

Returnable

90-Day

Vertical Lift (ft.)

25

Voltage

115v, 230v, No Voltage

Warranty / Certifications

Certifications and Listings

CSA Listed

Manufacturer Warranty

3 Years

Questions & Answers

4Questions
caret
Q:What is the max psi this pump make and how loud is it? I need a 60 psi pump
by|Mar 4, 2024
1 Answer
Answer This Question

A:  Amsmunich - The max PSI is 67PSI. It's difficult to explain noise level over text. The pump is actually more quiet than a normal 3/4 HP pump. As long as water runs thru it, it doesn't make a lot of noise as the water tends to muffle the spinning impeller -GP Support

by|Mar 4, 2024
    caret
    Q:Please clarify if this pump is 1/2 HP or 3/4 HP Thank you
    by|Jul 13, 2023
    1 Answer
    Answer This Question

    A:  It is 3/4HP - GP Support

    by|Jul 16, 2023
      caret
      Q:, can the preset 30 /50 on the switch be adjusted higher to 45/65 . GBJOE asked , but you danced around the question , answer it !
      by|Feb 28, 2023
      1 Answer
      Answer This Question

      A:  Mjohn - The pressure switch can be adjusted. There are instructions inside the pressure switch to move it up. -GP Support

      by|Mar 1, 2023
        caret
        Q:What is the best pressure the pump will supply, and can the pressure wsitch be adjusted to 45/65 (on/off) PSI.
        by|Jun 1, 2022
        1 Answer
        Answer This Question

        A:  GBJOE, We are interested to hear more about your application for the K2 Jet pump. If you would contact us at 844-242-2475 we would like the chance to learn more. Thanks, GP Support

        by|Jun 1, 2022
          Showing 1-4 of 4

          Customer Reviews

          4.6 out of 5

          • 4.6 out of 11 reviews
          • 91% recommend this product
          Filter by:
          Showing 1-10 of 11 reviews
          Works fine
          Very powerful pump. There appear to be two different K2 3/4 HP pumps. This is the higher output of the two. It is capable of pressures up to 72 psi and a flow of 19.5 gallons per minute. The 19.5 gallons per minute is at no head, but that gives you some idea of how powerful this pump is. This pump will accept 220V or 120V AC. Max current at 120VAC is 15.8A and max current at 200VAC is 7.9A I got this to replace a 20+ year old pump. If you are not good at plumbing I suggest you get a plumber to do it for you. He had to use a lot of new parts to get it connected.
          by
          • Recommended
          Good Pump
          This 3/4 Horsepower Cast Iron Shallow Well pump was very easy to install, ready to go right out of the box. The price is fair and the shipping was good, there was no damage in shipping due to the good, solid packaging done in the box. The pump works very well after my husband installed it, and he's very happy with how it is performing. Very solid product!
          by
          • Recommended
          K2 3/4 HP Shallow Well Pump for increasing pressure in existing system.
          The K2 3/4 Horsepower Cast Iron Shallow Well Jet Pump is a great secondary pump to add to an existing pump to increase the power of your water pressure, or if you have a shallow well of 25', then this pump will work great for you. The pump housing is cast iron, which is great. The pump is self priming after you initially fill the housing with water. An added feature is that this pump is dual power, meaning that it can function off 240 volts, or 120 volts. The pump has a switch that the user sets, and the pump is then operated under the selections power setting. This pump has varying gpm flow rates, all at 40 psi. The farther away from the pump the flow will diminish. The top rating is 19.5 gpm at zero feet, while it drops down to 10 gpm at a distance of 25 feet. Its maximum pressure shutoff is 72 psi. The pressure switch is "on" at 30 and "off" at 50. You are able to adjust this to fit your particular needs. This pump can be used for direct well or for a secondary. The instructions are very precise and clear in guiding you through installation. Although I have not yet installed this pump, it's purpose is as a secondary to hook into the pressure tank, and increase the pressure into the house. It is perfect for this purpose. The manufacturer warns that this pump is for WATER ONLY. It is NOT to be used for any type of flammable or explosive liquids, such as oil, gasoline, kerosene, ethanol, or others. This pump is also NOT to be used for sewage, as this will void the warranty. The pump comes with a one (1) year warranty, and it is meant for only residential use. Commercial use will void the warranty. I am very pleased to have this pump. Moving into a new home, this pump will be installed in the well house to help increase the pressure into the house. It is well built. The instructions are great. I have no issues with the pump at this time. I'm certain it will function accordingly. I rate this 5*s out of 5. Thank you GP Enterprises, K2 Pumps for allowing me to try your product. Thank you Home Depot Seeds for offering this item to me.
          by
          • Recommended
          1 found this review helpful
          High quality pump with clear concise instructions for the DIYer
          I live in an area where there is no municipal water for miles which means virtually all of the residents rely on well water. There are a number of large lakes in the area which supply a vast amount of ground water. I actually live on one of the smaller lakes and our well is supplied by a freshwater spring. Getting that water to our faucets requires a reliable pump. Our pump could run 100 times or more a day (easily) depending on laundry, showers or watering the lawn so it needs to be reliable. Our pump is located in a crawl space that's difficult to access so I wanted one that I felt could provide me with long life and adequate pressure so I can avoid entering that crawl. I've had to replace our pump a few times in the dozen years since we've moved here and I think this will be the last time. This K-2 pump seems to be the finest pump I've found. Around here there's a variety of reasons pumps fail, most common being the amount of use and another is freezing. As for freezing, the only way to avoid a problem is reliable heat in the crawl. With an exceptionally cold winter, it's not uncommon for many of my neighbors to experience a freeze and often wind up with a cracked pump. Many of those use a plastic pump housing which will fail even at mildly cold temperatures. The K-2 pump is made with a cast iron pump housing which can take colder temps. However, it isn't immune to potential cracking if care isn't taken to maintain a warm crawl space. The K-2 can be operated at either 120 or 230 volts depending on your application. I prefer to use 230 volts because the pump runs much more efficiently than at 120 volts. Note: the pump is factory set for 230 volts. It simply needs to be wired accordingly (electrician may be needed) and a voltage selection switch is located under the motor housing. This pump comes with a very adequate and detailed instruction book that has plenty of diagrams (pictures) and simple language makes the installation very easy to follow. It's capable of 75 PSI of water pressure whereas most are 50 to 60 PSI maximum (dependent upon a comparable pressure tank). Note: do not attempt to set your pump above the pressure rating of your tank which should have the pressure rating clearly marked. This pump (as seen) is ready for direct installation for 1 1/4 inch inlet and 3/4 inch outlet which is pretty standard. Providing your arrangement is compatible with those sizes installation should take under an hour barring any need for changes to the wiring (electrical) assuming you're not changing the voltage. However, some systems I've worked with have a different inlet size, you may need to purchase an adaptor. In my case, I'm reaching about 5 gallons of water per hour which is a substantial increase over my old pump. It also is quieter than my previous pump. I purchased mine on-line for direct delivery to my home. The packaging was more than adequate to avoid damage that can happen through shipping.
          by
          • Recommended
          Heavy Duty
          This is a very heavy duty Shallow well jet pump. Has everything you would expect from this type of pump . FYI you will need many other parts to implement into your system. Convenient power switching 115V to 230V , no wire jumping just a flip of the switch behind the motor cover.. Personally you will get better duty if you have 230v supply. Adjustable Pressure switch is part of the system. 1" FNPT discharge ,1 1/4" FNPT suction and a 25 ft max suction depth. Application for Shallow well, surface water draw . Instruction book has good instructions for both methods mentioned along with pressure tank applications and optional parts that might be needed. My application will be from a tank on a gray water system i'm making to water some landscaping .
          by
          • Recommended
          Very powerful pump!
          Very powerful pump. There appear to be two different K2 3/4 HP pumps. This is the higher output of the two. It is capable of pressures up to 72 psi and a flow of 19.5 gallons per minute. The 19.5 gallons per minute is at no head, but that gives you some idea of how powerful this pump is. This pump will accept 220V or 120V AC. Max current at 120VAC is 15.8A and max current at 200VAC is 7.9A. This pump appears to be very well-built and should provide reliable service for many years.
          by
          • Recommended
          Very nice heavy duty pump
          I got this as a backup pump for my water system. The spring on my ranch is almost 1/2 mile from the house and 100 feet lower than the house. I have a pump in a booster house to pump the water up to the house but if it fails we have no water. This pump has the ability to pump directly from the spring into the underground line that goes to the house. There are a bunch of things I like about this unit. The box has a list on the outside showing what fittings you will need to complete the installation. This is a really nice touch. The pump is very well packed to prevent damage. The installation instructions are some of the best I have ever seen. They are very clear and well written. The only problem I had is that when I removed the pump cover to change the voltage from 240 to 120 I found that the starting capacitor was broken. I have included a picture of the failed capacitor. This would have been a disaster for most people since the pump would refuse to start. I keep spare starting capacitors in my shop so I just replaced the broken one. There was no damage to the cover so the only way that the capacitor could have been broken was during assembly. K2 probably should have test run the unit after assembly to catch this type of error. Even with the capacitor problem I am very happy with this pump. It moves a lot of water and is very quiet.
          by
          • Recommended
          Great 3/4 Shallow Pump
          Engineered for higher performance, this K2 Pump 3/4 HP Shallow Well Jet pump will keep the water  flowing into your home, cabin or farm with a flow rate of 19.5 GPM at 0 ft of lift. Constructed of durable cast iron with stainless steel motor shaft and fasteners. Weighs 38 lbs and measures 8.8 inches high, 19.3 inches wide and 10.4 inches deep.  The motor is safeguarded by an auto reset thermal  overload protector to prevent overheating. The pump comes ready to install out of the box and included  on the box is a list of required materials. Designed to be installed above ground for shallow wells with depth to water up to 25 ft. depth.  There is a 3 year warranty from K2.  
          by
          • Recommended
          Good solid pump
          We ordered this pump for the pool and shower house, it arrived very well packaged and protected. The pump is very heavy duty in materials used during manufacturing. Came with pre installed pressure switch all ready for wiring and pressure tank. The 3/4 horse power motor provides plenty of mussel to keep the pressure tank up and flowing. Good job k2
          by
          • Recommended
          Poor quality pump
          I bought this pump in June of this year in October the motor burned up I called k2 they said the warranty was voided because I used it to water my 40x50 garden, and that’s not considered residential use.
          by
          Response from GPPumps TeamOct 14, 2021
          Thomas,


          Thank you for your comment. Each of our different types of pumps is designed specifically for particular applications. For irrigation, which requires extended run times versus jet pumps, we recommend our model IRP10001K 1.5HP Sprinkler Pump which includes thermal overload protection. If you have any further questions, please let us know – our number is 844-242-2475.
            Showing 1-10 of 11 reviews

            Compare Similar Items

            current item

            Housing Material

            Cast-Iron

            Thermoplastic

            Cast-Iron

            Cast-Iron

            Impeller Material

            Reinforced Thermoplastic

            Thermoplastic

            plastic

            Thermoplastic

            Voltage

            115v, 230v, No Voltage

            115v, 230v

            115v, 230v

            115v, 230v