Internet #205862828

Model #S3040L1200

ES Series 200 Amp 30-Space 40-Circuit Main Lug Indoor Load Center

  • The best choice panel for both value and quick installation
  • Reduced installation time with Siemens Insta-Wire Neutral/Grounds
  • Perfect panel for Residential/Commercial Power Distribution
  • See More Details
$8904

Frequently Bought Together

+
+
Price:
$8904

Product Overview

The new Siemens ES Series Load Center is the smart choice when value and quick installation are of highest priority. The ES Series load centers include labor saving features such as the patented Insta-wire and mounting trim tabs. These exclusive features make the ES Series load center the best load center for the value minded contractor.
  • A single phase, 120/240-Volt, 200-Amp main lug load center with 30-spaces/40-circuits
  • Aluminum bus
  • Ground bar field installed
  • Combination head screws on neutrals, ground, trim, upper pan and bond screw provide installation flexibility
  • Dual side inboard neutral
  • Invertible for bottom feed application
  • Mounting tabs on the trim hold it in place on the load center, freeing up both hands to drive the trim screws
  • Pre-positioned bond screw eliminated bond straps/screw assemblies and reduces the risk of losing components in the field
  • Insta-wire neutral/ground system allows for faster installation because screws arrive backed out, ready for wire insertion, the visible neutral and grounds systems also aids in the insertion of conductors
  • Rigid, sturdy base pan provides ruggedness required for harsh applications
  • NEMA type 1: enclosure is intended for indoor use primarily to provide protection against contact with the enclosed equipment in locations where unusual service conditions do not exist
  • ES Series Single Phase load centers are being phased out, and replaced by the new SN Series Plug-On Neutral load centers, S3040L1200 equivalent is the new SN3048L1200
  • Learn More About Electrical Panels Here in our Buying Guide.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Individual Subpanels

current product
ES Series 200 Amp 30-Space 40-Circuit Main Lug Indoor Load Center
PN Series 200 Amp 24-Space 48-Circuit Main Lug Plug-On Neutral Load Center Indoor with Copper BusPN Series 200 Amp 30-Space 30-Circuit Main Lug Plug-On Neutral Load Center Indoor with Copper BusPowerMark Gold 200 Amp 40-Space 40-Circuit Indoor Main Lug Circuit Breaker Panel
BrandSiemensSiemensSiemensGE
NameES Series 200 Amp 30-Space 40-Circuit Main Lug Indoor Load CenterPN Series 200 Amp 24-Space 48-Circuit Main Lug Plug-On Neutral Load Center Indoor with Copper BusPN Series 200 Amp 30-Space 30-Circuit Main Lug Plug-On Neutral Load Center Indoor with Copper BusPowerMark Gold 200 Amp 40-Space 40-Circuit Indoor Main Lug Circuit Breaker Panel
Price
$8904
$10790
$11556
$13552
Ratings
(10)
(3)
(3)
(15)
Maximum Amperage (amps)200200200200
Indoor/OutdoorIndoorIndoorIndoorIndoor
Number of Spaces30243040
Mounting TypeBolt OnPlug-On NeutralPlug-On NeutralPlug-On
Number of Circuits40483040
Voltage (volts)120120/240120/240240
Load Center TypeMain LugMain LugMain LugMain Lug
View ProductView ProductView ProductView Product

Specifications

Dimensions

Load center depth (in.)
5
Load center height (in.)
34.5
Load center width (in.)
15.875

Details

Electrical Product Type
Main Lug/ Main Lug Kit
Indoor/Outdoor
Indoor
Indoor/Outdoor
Indoor
Load Center Mounting Type
Flush,Surface
Load Center Type
Main Lug
Maximum Amperage (amps)
200
Mounting Type
Bolt On
Number of Circuits
40
Number of Spaces
30
Phase Type
1 Phase
Product Weight (lb.)
29
Returnable
180-Day
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
10 Year

Questions & Answers

17Questions11Answers

Is bolt on meaning surface mount?

Asked by 808DYIkindofgal August 27, 2020
1
Answer

Bolt-on refers to the wall-mounting method for surface mount. S2024L1125 has a combination type cover that can be used for either surface or flush mount.

what are the exterior dimensions of the door cover? and distance between mounting screw holes? I ...

Asked by Bruce December 23, 2019
2
Answers

A replacement trim assembly is available as RST3030L1200. Contact Home Depot for availability. An image is available at the below link. The mounting hole dimensions can be measured on your enclosure (3 per side). Trims for ES load centers are 15.5 inches wide. The length is always 1.13 inches longer than the box size which for a S3030L1200 is 30 inches. https://s3.amazonaws.com/dcc-data-extract/new-delta/asset/Compas/daily/Compas/2019-10-15/3D%20Drawing/SIE_PH_RST3030L1200.png

Hello I'm looking for a way to put a key to the door of these panels, can you help me

Asked by Javier March 2, 2019
1
Answer

The ECQFL2 door lock can be added to S2020L1125. It comes with two keys. Please see below link for instructions. https://w3.usa.siemens.com/us/internet-dms/btlv/residential/residential-murray/docs/ECQFL2.pdf

Can you ADD a Main Breaker to this load center?

Asked by BT December 17, 2018
1
Answer

A main breaker can only be added in a branch position for S2040L1200 as it is a "non-convertible" load center. You would lose the use of the top 4 spaces, though. For 125A and under main use Type QP breaker plus ECMBR2 main breaker hold-down kit. For 150-200A use Type QNR breaker and install the hold down screw that comes with it for backfed applications. To download the wiring diagram for this item go to link below and click on "Downloads" and enter S2040L1200 in the search box. https://w3.usa.siemens.com/powerdistribution/us/en/Pages/low-medium-voltage.aspx

Could this be used as a subpanel alongside an existing Square D Panel? We'll potentially need to...

Asked by CluelessHomeowner September 17, 2018
1
Answer

When mixing manufacturers in an electrical system, the two concerns are the listing of each product and short circuit ratings. First, only listed breakers (i.e. UL tested for that specific load center) can be used in a load center, and our load center will only list our breakers (listed breaker types can be found on each load center’s wiring diagram). The same rule would apply for the Square D load center, i.e. if you are using a breaker to feed out the Square D load center into ours, that breaker must be listed on the Square D load center. Another concern is short circuit ratings of the downstream breakers to the upstream load center. If a main lug load center is used downstream, the installer would need to calculate the short circuit pass through values from the transformer through the electrical distribution system to ensure the downstream load center is adequate. The safest bet would be to use a main breaker load center for the downstream application, which means the interior breakers would “series rate” to the main breaker in the same load center. As long as the listings are adhered to and the short circuit interrupt ratings are not exceeded, using two separate manufactures in an electrical system can be accomplished.

hi does it comes with any breakers?

Asked by Ricky July 25, 2018
1
Answer

Branch breakers are not included as they should be selected based on specific application.

can a 100 amp main breaker be used in this panel

Asked by steve April 3, 2018
1
Answer

Yes, by backfeeding into a branch position. Q2100 (10kA) or Q2100H (22kA) can be installed in spaces 1&3. Breaker hold down kit ECMBR2 must be used (this prevents installation of a breaker in spaces 2&4, however, so you lose 4 spaces in total). Refer to the wiring diagram for guidance. To download the wiring diagram for this item go to link below and click on "Downloads" and enter S4040L1125 in the search box. https://w3.usa.siemens.com/powerdistribution/us/en/Pages/low-medium-voltage.aspx

Is there a 200 amp main breaker that will work with this load center?

Asked by George October 28, 2017
1
Answer

S1224L1200 is not convertible to 200A main breaker. For a convertible panel consider P1224L1200CU.

what size wire will main lug accept?

Asked by volt October 28, 2017
1
Answer

The A, B & N main lug terminals of S3040L1200 accept 4/0-4 AWG Cu or 300kcmil-4 AWG Al (single conductors only). To download the wiring diagram for this item go to link below and click on "Downloads" and enter S3040L1200 in the search box. http://w3.usa.siemens.com/powerdistribution/us/en/Pages/low-medium-voltage.aspx

I don't see a ground bar on the circuit panel. Does a ground bar come pre-installed on this brea...

Asked by Jay August 26, 2017
1
Answer

S1224L1125 does not come with a ground bar. However, one can be added to each side. Select from the following: EC1GB8 GROUND BAR KIT-8 POSITION, EC1GB82 GROUND BAR KIT-8 POSITION 2/0 LUG, EC2GB12 GROUND BAR KIT-12 POSITION, EC2GB122 GROUND BAR KIT-12 POSITION 2/0 LUG, EC2GB15 GROUND BAR KIT-15 POSITION, EC2GB152 GROUND BAR KIT-15 POSITION 2/0 LUG

ES Series 200 Amp 30-Space 40-Circuit Main Lug Indoor Load Center - page 2

Customer Reviews

  • 10 Customer Reviews
  • 4.4 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(6)
4star-icon(3)
3star-icon(0)
2star-icon(1)
1star-icon(0)
Sort By:
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
Was this helpful?
0
0
5 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
2 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
Response from SIEMENS Product ExpertFebruary 7, 2019
I apologize for any issue that you had with your Siemens Load center. We take great pride in the quality of our products. We would like to understand your specific situation and address any issues you may have. Please feel free to reach out to Siemens Technical Support at 1-800-333-7421. We would like to help troubleshoot the issue you are having or provide a replacement unit if necessary. SIEMENS
Perfect for the job we are completing right now...
Perfect for the job we are completing right now
Was this helpful?
0
0
Needs another lug for the neutral.
Needs another lug for the neutral.
Was this helpful?
0
0
Response from SIEMENS Product ExpertOctober 1, 2018
Our Product Selection team can best help assist with getting products that are needed for your application, they can be reached at 866-663-7324 opt 1 or productselection.us@siemens.com SIEMENS
Very good value one of the best on the market.
Very good value one of the best on the market.
Was this helpful?
0
0
Response from SIEMENS Product ExpertMarch 14, 2018
We definitely agree with you! Bias or no the Siemens brand over time has consistently been one of the best on the market. We appreciate your business! SIEMENS
4 Star Review
Rating provided by a verified purchaser
Was this helpful?
0
0
Response from SIEMENS Product ExpertFebruary 19, 2018
Thank you for the review Mohsen! Our PL or ES type load centers are both high quality options to purchase SIEMENS
Solid Siemens equipment. Came shipped on pallet with circuit breakers. No damage! Could not find ...
Solid Siemens equipment. Came shipped on pallet with circuit breakers. No damage! Could not find the option with ground bars already installed on the website. Had to add those. Combined a main panel and adjacent sub-panel with a generator automatic transfer switch as the main disconnect.
Was this helpful?
0
0
Review this Product
Share your thoughts with other customers