Questions and Answers for Bernzomatic Advanced Performance Torch with Instant Start/Stop Ignition Compatible with Map-Pro and Propane Gas

A:  Hello, and thank you for your contact. We cannot guarantee the performance of your torch if you use it with a MAPP substitute. We can easily be reached at: Bernzomatic@WorthingtonIndustries.com if you have any additional questions. Thank you.

A:  No only works with LP or Mapp gas torch cans 

A:  Hello and thank you for your contact. So that we may better assist with your inquiry, please email us directly at Bernzomatic@WorthingtonIndustries.com. Thank you.

A:  Hi Flint. Thank you for your question. For more detailed information regarding flint replacement for your Bernzomatic Trigger Start Torch Head, please contact: 866-928-2657 or online at: www. Worthingtoncylnders.com or www.bernzomatic. Please let us know if we can be of further assistance. Rick_HD_OC

A:  This type of torch head, is a flint-less ignition system, by using a small piece of quartz, with a special device to strike it, causing a shock/arch of electricity(Limitless).

A:  You don’t. It’s on or off. 

A:  This model does not have an adjustment knob. Instead the trigger itself is pressure sensitive. So careful modulation of your indexing on the switch will help to adjust the flame. Be cautious, this is not a toy, and the flame will ignite any combustible materials within 3 to 5 feet of the nozzle.

A:  On this model you can’t narrow the flame nor the intensity. 

A:  This model's flame can only be altered, by changing the tip itself, as there are no knob's for adjustment's. This has the spiraling tip, which narrow's the flame quite well.

A:  You don’t with this torch. It’s either on or off, no adjustment at all if you want to narrow the flame you will have to buy a different torch. But if you don’t need to narrow the flame this torch is durable and very handy.

A:  Hello, and thank you for your comment. The TS4000 torch does not feature a control knob, so the flame output on this torch will be a consistent and unchanging flame. If you have any additional questions, please feel free to email us directly at Bernzomatic@WorthingtonIndustries.com. Thank you.

A:  No, you cannot adjust the flame. 

A:  Not sure if this by design or not but you can put varying pressure on the trigger to reduce gas flow and therefore flame. It is tricky and requires a good touch as well as steady touch. For lack of better words it is a quick trigger

A:  You can't control the flame

A:  No, but the TS800 you can

A:  No need for a warrantee. No soft plastic parts to melt.

A:  Found this via google search. Maybe you can call the number posted for an answer: LIFETIME Limited Warranty TS4000, TS7000, TS8000, T757, BZ4500HS, BZ8250 Bernzomatic warrants to the original purchaser that this product is free from defects in material and workmanship for as long as you own your TS4000, TS7000, T757, TS8000, BZ4500HS, or BZ8250. This warranty is valid for all purchases of the TS4000, TS7000, T757, TS8000, BZ4500HS, and BZ8250 on or after June 1, 2016. This warranty does not apply to product that has been damaged as a result of improper maintenance, accident or other misuse, or which fails to operate due to normal wear and tear. This warranty is void if the product is repaired or modified in any way by anyone other than Bernzomatic. Bernzomatic will repair the product if it proves to be defective in materials or workmanship. At the choice of Bernzomatic, a replacement product may be provided instead of repairing a defective product. The sole obligation of Bernzomatic and your exclusive remedy under this warranty are limited to such repair or replacement. To make a claim under this Limited Lifetime Warranty, contact any Bernzomatic retailer or contact Bernzomatic directly at 1-800-359-9678. A service representative will assist you. Please provide proof of date of purchase when making a claim. Bernzomatic makes no other warranties concerning the product. In no event shall Bernzomatic be liable for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

A:  Typically it can be found at the brand or manufacturer's website.

A:  Best source to answer your question is the manufacturer’s customer service department.

A:  Hello, and thank you for your question. To view warranty information on your specific product, please visit our website, Bernzomatic.com, and select the torch in question. If you have any additional questions, please email us directly at Bernzomatic@WorthingtonIndustries.com. Thank you.

A:  As long as the threads are the same yes it will work

A:  Hello, and thank you for your question. Our TS4000 torch is designed to be used with propane fuel and our Map/Pro fuel. If you have any additional questions, please email us at Bernzomatic@WorthingtonIndustries.com. Thank you.

A:  Im not sure I have only used with new tank.

A:  It should