Questions and Answers for DEWALT 7 Amp Corded 1-1/4 Horsepower Compact Router with Plunge Base and Bag

A:  No. 1/4 only.

A:  Only 1/4 inch shank

A:  There are no edge guides for curved edges you will have to create the curved edge guide. Is should be possible to create a curved guide and attach it to the commercial guide. For the Fixed Base there is a Dust Collection Adapter PN: DN615 and Edge Guide PN: DNP618, for the Plunge Base the Dust Collection Adapter PN: DNP616 and Edge Guide PN: DW6913. These are not standard stock items for most sales outlets so you will probably need to locate them on the Web.

A:  The DNP616 is the vacuum adapter for the plunge base and DNP615 is for the fixed base.

A:  No dust collector adapter

A:  I believe there is.

A:  No, I have not found any other types of dust collection adapters for the compact router.

A:  No, must purchase separate.

A:  ! HP is 745.7 watts so 1.25 HP is 932 watts

A:  Yes, we would recommend our sister company PORTER-CABLE model 42000.

A:  Yes, it will accept Porter-Cable bushings right out of the box. I use mine on a regular basis.

A:  The hole in the fixed base is 1 1/2 inch. The hole in the plunge base is 1 3/16 inch with a rabbet around the hole to accommodate the template guides.

A:  The hole is 1-3/16".

A:  I don't know, call Dewalt

A:  Try to contact Dewalt and see if they have it, or check this website (www.ereplacementparts.com) they carry all kind of parts.

A:  Part number for the base alone is DNP612. I do not believe that HD sells the base by itself online. You may need to go to a local store to order one.

A:  I strongly advise that anytime you install a plunge router base that you use an alignment cone, this assures that anytime you use a template guide in the base your cutter will be properly centered..

A:  Never seen it offered by itself through retailers. You could always check with customer service either at HD or through Actual manufacturer

A:  No. Optional.

A:  Yes, at Rockler

A:  The fixed base (the acrylic base) is 4" wide and 4 13/16" front to back (the front is square and the back is half round)

A:  The fixed base width is 4" (STANDARD) for our DWP611PK COMPACT ROUTER COMBO KIT.

A:  the clear plastic base has dimensions of approx 4x4-3/4 inch. the plunge base is 4-3/8x5-3/4 in. new bases can be very easily made. i made a much larger one from masonite for a temporary application in about 10 minutes.

A:  The base pad is 4 x 4 7/8 inches. The diameter of the fixed base is 4 inches

A:  The fixed router base measures 4 1/16 inches wide and 4 7/8 inches back to front.

A:  The flat end of the base is 4” wide. Total length of the base is 4 3/4”, with the corners rounded on a 2” radius. Great little router! I use both the fixed base and plunge base equally.

A:  Only in the kit.

A:  Gabe: Thank you for your inquiry with HomeDepot.com. Unfrotunately, the router plunge base is not available as a separate item with Home Depot. You may be able to "special order" this item through the Tool Department of your local Home Depot store. We hope this information is helpful, we appreciate your business.

A:  Yes there are two.

A:  Yes. it has dual LED lights.

A:  It certainly does, and they are nice to have.