Questions and Answers for DEWALT 7 Amp Corded 1-1/4 Horsepower Compact Router with Plunge Base and Bag

A:  It certainly does, and they are nice to have.

A:  Yes there are two.

A:  Yes. it has dual LED lights.

A:  I would have to say NO. It would be a whole lot easier to cut dovetail joints with a mounted table router instead of a handheld router, but it can be done by making and using a jig with your router and then using a band saw. See this video: https://www.youtube.com/watch?v=dNoKZYNPbUg

A:  I have done five pullout drawers and it worked fine, let the router do the work, go slow. I got it to do aluminum milling on 80% AR lowers as it was the best one recommended by many jig makers.

A:  I looked at the Home Depot site and checked on this router's shipping information and found this statement under the FAQs: 'We are not able to ship to international destinations, PO Boxes, APO/FPO/DPO addresses at this time'.

A:  The plunge base is equipped with a sub base for the Porter Cable template guides and will not require any additional attachments.

A:  The conventional PC style bushings DO FIT the lunge base, but NOT the fixed base- the hole is too large, so you would need to make an accurate sub-base to hold the guide bushing.

A:  If you have the DWP611PK, the plunge base is equipped with a sub base for this application. If you have the DWP611 with the fixed base, you will need accessory sub base, DNP613, in order to use template guides

A:  The plunge base does accept the standard guide bushings. The straight side base plate does not. However, there is a round base plate available for the standard base which also accepts the guide bushings.

A:  In the 'Use and Care Manual' there is a section called 'Using Template Guides' in which they state that the guides do not work in the 'D' shaped base and only works in the round base. I purchased the round base and I use the standard template guides with it. When you purchase the round base you need to purchase a 'centering cone' too so the router bit will be properly positioned regardless of which way you turn the router.

A:  Yes it can!

A:  Only on the plunge base. You will have to order an optional base plate for the fixed base in order to use the collet guides.

A:  Yes, this unit is compatible with standard edge guide.

A:  No.

A:  Yes, I believe the number is DNP 616 for the DWP 611 compact router package, double check on websites. Use your computer to its' full advantage, CLICK SEARCH.

A:  •Allows up to 1.5" of depth travel with standard base & 2" with plunge base

A:  No.

A:  no

A:  Read the Home Depot "Product Overview" on the product webpage,to see what is included with this item. Most questions on most products offered by Home Depot can be answered by reading this brief overview.