Questions and Answers for DEWALT Scroll Saw Worklight

A:  Yes, the DW7881 will have an on/off switch.

A:  Thank you for reaching out to us with your question. The G5809 Scroll Saw Light is 11.88" x 8.25" x 2.5".

A:  DEWALT does not offer a replacement bulb in our product line however you can use a Sylvania bulb as a replacement, model number 25T8N/BL.

A:  It came with an incandescent bulb with no markings/numbers. Have not found a replacement. Have tried to find an LED replacement without success

A:  FEIT Electric enhance 60 watt led E17 indeterminate base A15 bulbs 8.3watt From Home Depot Daylight 5000K Caution A15 bulbs are a little longer than the bulb supplied with the lamp and will extend beyond the lamp cover.

A:  It seems there are LED lamps available Search for LED replacement for 25T8BN Example find: HQRP 110V E17 Dimmable LED Light Bulb Cool White for Bosch HMV9305-01 / 25T8N / 423878 Replacement

A:  intermediate base bulb 25t8n/bl , appliance bulb from hardware store

A:  The lamp has it's own separate plug.

A:  The worklight does require wiring connection.

A:  Just plug into an outlet.

A:  It plugs into an outlet.

A:  the light has a plug for a wall outlet

A:  There is a location on the left back of the saw that was anticipated to be needed by DeWalt.

A:  Hi, so there are two screws on the left side of the saw near the back that you use to connect the lamp to the saw. The lamp has a bracket that you put the screws through. Just remember, the screws in the saw are in really tight, be careful to not damage them when removing them the first time.

A:  To install the worklight on a DeWalt scroll saw, there are two screws already on the rear of the base near the top. It is simply a matter of taking the screws out and using those same screws, mount the worklight bracket.

A:  It bolts on to the dewalt saw. I made a bracket for my delta saw

A:  Attaches to scroll saw with 2 bolts. Very easy.