Questions and Answers for Delta Foundations Single-Handle 1-Spray Tub and Shower Faucet in Chrome (Valve Included)

A:  Hi Dutchie, Thank you for reaching out to Delta Faucet Company! Yes, you can use any showerhead, hand shower, or tub spout of your choice with any of our tub/shower valves. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi VReal, Thank you for your question! Yes, this model can be installed onto an existing R10000 rough-in valve. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

A:  Hi Raizy, Thank you for your question about the Delta Faucet model B114900C. Similar models are B114915C and B114920. To replace the trim and cartridge without replacing the valve rough in the wall, you need a faucet that uses the RP70538 cartridge. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hi Dennis, Thank you for your question! The RP17453 tub spout is designed to sweat onto a smooth copper pipe extending 2 - 4" from the finished wall, or thread onto a 1/2" IPS nipple extending 5/8 - 1 5/8" from the finished wall. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

A:  Hi Delrta! Thank you for your question and we are happy to help. We offer a lifetime limited warranty that can be reviewed on our website. With any further questions or concerns, please do not hesitate to reach out to us again. Best Regards, Carrie

A:  Hi Jeff, Thank you for your question about the Delta Faucet model B114900C. Turning the rotational limit stop counterclockwise will increase the maximum hot water allowed to be mixed. With the handle removed, pull the o-ring to a position where it is possible to slide the limit stop. Push the o-ring back into place after the adjustment is made. See the installation manual for additional information: https://images.thdstatic.com/catalog/pdfImages/c1/c1221943-03cf-4d3e-bc8a-c4682dea7685.pdf Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Hi tacomaguy20, Thank you for your question! The RP64721 spout will slip onto 1/2" copper piping that extends 1 1/4” to 1 1/2” from the finished wall. The slip-on adapter can be removed to allow it to thread into a 1/2" nipple that extends 3 7/8"- 4" from the wall. Silicone sealant may be used where the base meets the wall if there is still a slight gap. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist

A:  Hi Ryan, thank you for contacting Delta Faucet Company! No, our foundations model uses this valve only at this time. If you are wanting to update to a Matte Black tub/shower trim, the valve will also need to be changed. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi Dave, thank you for contacting Delta Faucet Company! Our B114900C-SS has a specific valve that is not interchangeable with our R10000 valves or our Monitor valves. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi EDK1747, Thanks for your question regarding B114900C-SS! This model is designed to work with the included valve body. This faucet does not use a MultiChoice valve, so the selection will be limited. To properly assist you in purchasing a new trim, we would need you to contact us directly to identify your current model. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist