Q:Do they make a white closet-rod bracket that is adjustable.... I hate wire shelves and want to use wood shelves, but I want to be able to adjust the height of the various rods at any time. They make such brackets for department stores... See photo.
by|Aug 8, 2022
1 Answer
Answer This Question
A: An adjustable alternative to the Everbilt White Heavy-Duty Shelf Bracket and Rod Support would be the Everbilt White Adjustable Shelf Bracket and Rod Support, part number 14857, Store SKU # 460046,Internet number 202824730. It can be found in the following link: https://www.homedepot.com/p/Everbilt-White-Adjustable-Shelf-Bracket-and-Rod-Support-14857/202824730.
by|Aug 11, 2022
Q:If you wanted to put a flat on both ends screw on the bottom underneath the rod (to add as an extra way to secure when using a metal pole), do you have these type screws? The bracket is pre-drilled.
by|Aug 6, 2022
1 Answer
Answer This Question
A: When securing a rod to the Everbilt White Heavy-Duty Shelf Bracket and Rod Support, The Home Depot will have the right fastener for either wood or metal rods.
by|Aug 11, 2022
Q:Can you verify the dimension of the depth to the bottom of the hook as shown on the drawing for Model #14317? On the drawing it shown as 2.6". As purchased I measured it to be 3".
by|Jun 19, 2022
1 Answer
Answer This Question
A: This particular measurement may vary based on a slight tolerance of maybe +/- .3 inch. A more common measurement of 2-7/8 inches may also be found.
by|Oct 4, 2023
1 found this answer helpful
Q:How much weight will these hold with a shelf and clothing
by|Mar 24, 2022
2 Answers
Answer This Question
A: This Everbilt White Heavy-Duty Shelf Bracket and Rod Support will support up to 150 lbs of shelf load capacity.
by|Feb 5, 2024
3 found this answer helpful
A: I have three of these brackets and a twelve foot rod full of clothes and i put bags on the top shelf seems very sturdy.
by|Feb 5, 2024
4 found this answer helpful
Q:Where are these brackets manufactured?
by|Feb 15, 2022
1 Answer
Answer This Question
A: The Everbilt Black Heavy Duty Shelf Bracket and Rod Support is currently manufactured in China.
by|Feb 15, 2022
Q:What is the rod diameter that the WHITE Heavy Duty Shelf Bracket will hold?
by|Jan 4, 2022
4 Answers
Answer This Question
A: We used it to hold a 1/2" dowel for hanging plants, but it's big enough to hold at least 3/4"
by|Jun 25, 2022
2 found this answer helpful
A: About 11/2 inches.
by|Nov 27, 2022
2 found this answer helpful
A: 1 1/4” fits snug, but you can easily make other sizes fit
by|Mar 18, 2024
6 found this answer helpful
A: The White Heavy-Duty Shelf Bracket and Rod Support works with a standard closet rod (1-1/2" diameter).
by|Jun 25, 2022
4 found this answer helpful
Q:What is the diameter rod this holds?
by|Sep 6, 2021
1 Answer
Answer This Question
A: The Everbilt Black Heavy Duty Shelf Bracket and Rod Support works with a standard closet rod (1-1/2" diameter).
by|Mar 11, 2022
6 found this answer helpful
Q:What size shelf does it support?
by|Aug 1, 2021
4 Answers
Answer This Question
A: For the White Heavy-Duty Shelf Bracket and Rod Support by Everbilt it is recommended that the shelf depth not exceed 2 inches passed the shelf bracket. This bracket’s shelf depth is 11 inches.
by|Dec 15, 2021
2 found this answer helpful
A: It would depend on the shelf but these are common with the 15.75" shelves. I hope this helps!
by|Mar 9, 2022
1 found this answer helpful
A: I used this on for a 15 in. shelf.
by|May 7, 2022
4 found this answer helpful
A: It will take a 12" to cover the bracket, but if properly screwed on a wider board can be affixed.
by|Feb 1, 2022
1 found this answer helpful
Q:How should I install these into studs in drywall and what screw and drill bit should I use?
by|Jun 28, 2021
1 Answer
Answer This Question
A: We recommend using #14 x 1-1/2 in. and #12 x 3/4 in. screws (Model 14854, Store SKU 463230) for the Black Heavy Duty Shelf Bracket and Rod Support by Everbilt. The drill bit size would depend on whether or not you are countersinking the screws. Please use attached link for drill bit size. https://www.boltdepot.com/fastener-information/Wood-Screws/Wood-Screw-Pilot-Hole-Size.aspx
by|Mar 25, 2022
1 found this answer helpful
Q:How should I go about installing this into cinder blocks. What type of screws would I need to use and what drill bit?
by|Jun 28, 2021
1 Answer
Answer This Question
A: When installing the Everbilt Black Heavy Duty Shelf Bracket and Rod Support, Black finish into cinder block, a concrete anchor should be used.