Q:Hello what is the load rating for each tire? Also what is the bore length for the axle shaft? My old one is 3 inches.
by|Jun 12, 2020
1 Answer
Answer This Question
A: The load rating is 300 lbs. per tire. The bore length is 3.94".
by|Jun 16, 2020
Q:How much do they weigh?
by|Mar 7, 2020
5 Answers
Answer This Question
A: I don't know exactly but I will take a guess at 10 to 12 each . They work great I've had mine for a few years. Good buy
by|Jul 5, 2020
A: Each tire weighs 6.8 lbs.
by|Jul 5, 2020
1 found this answer helpful
A: I didn't weigh them but they feel about eight to ten pounds each.
by|Jul 5, 2020
A: They light. About the same as pneumatic ones.
by|Jul 5, 2020
A: I’d say about 5lbs each.
by|Jul 5, 2020
Q:How much does each tire weigh?
by|Mar 7, 2020
4 Answers
Answer This Question
A: I don't know offhand, probably around 4-6 lbs each, not enough to worry about. I do know that they will hold a lot of weight. My son was showing off last year piling the wheelbarrow to overflowing with stones and bent the 5/8ths axle.
by|Mar 8, 2020
A: About 4 pounds.
by|Mar 8, 2020
A: 7.3 lbs.
by|Mar 10, 2020
A: Each tire weighs 6.8 lbs.
by|Mar 10, 2020
Q:Will these fit a 3.50-8" tire
by|Jul 5, 2019
2 Answers
Answer This Question
A: These are 16" diameter tires. If you need 8" diameter tires then no, they won't work for you.
by|Jul 11, 2019
A: No, these are tire and rim combined and would be a taller tire.
by|Jul 5, 2019
Q:What is the tire size I am looking for 4.80/4.00-8
by|May 14, 2019
4 Answers
Answer This Question
A: These are 4.80/4.00-8. Axle size is 5/8" with no offset. Bearings are centered.
by|May 16, 2019
A: I just went out and looked, my pair is stamped on the tires 4.80/4.00-8 on the sidewalls.
by|May 14, 2019
A: This tire is 4.80/4.00-8 .
by|May 14, 2019
A: most common
by|May 21, 2019
Q:What size axle do these fit? 5/8”. or. 3/4”
by|Apr 8, 2019
5 Answers
Answer This Question
A: Both. They provide both hubs.
by|Jul 16, 2019
A: Both sizes
by|May 15, 2019
A: The universal adapter kit includes flange bearings and nylon wheel spacers to accommodate 5/8 in. and 3/4 in. axles.
The answer is both, depending on which bearings that you use.
by|Oct 15, 2019
1 found this answer helpful
A: Both.
by|Apr 9, 2019
A: 5/8 but comes with 3/4 kit
by|May 21, 2019
Q:how wide is the rim where the axel goes through.
by|Mar 27, 2019
4 Answers
Answer This Question
A: 3 7/8 "
by|Oct 16, 2019
A: In the specifications it says 4 inches. To actually confirm this, I would have to take one of the wheels off the wheelbarrow to physically measure. But I would say that the 4 inch would be accurate.
by|Mar 28, 2019
A: 3 7/8"
by|Oct 16, 2019
A: 5/8
by|May 21, 2019
Q:I am looking for tires for a chicken tractor. What is the load capacity for these tires?
by|Feb 18, 2019
4 Answers
Answer This Question
A: The weight capacity of these tires is 300 pounds per tire.
by|Feb 21, 2019
A: I’m sure they will work for a chicken tractor. I used them to support a steel framed atv brush hog and they performed fine. I would recommend getting airless tires if these are the ones without them.
by|Feb 20, 2019
1 found this answer helpful
A: The manufacturer states 300 pounds per tire.
https://tricamindustries.com/product/fr2215/