Questions and Answers for FlexStone Elegance 36 in. x 48 in. x 80 in. 7-Piece Easy Up Adhesive Corner Shower Wall Surround in Calypso

A:  Hello Dave, FlexStone surrounds do not require inside corner trims, but we do have them available for separate purchase if desired (model #FLXICN1.596WH). The surround comes with silicone caulking which will seal up the corners. Please let us know if you have any other questions.

A:  Hello, yes most other manufacturer's shower bases will work with our surrounds. Please let us know if you have any other questions.

A:  Hello, Thank you for your interest in our FlexStone shower wall surrounds. In the kit there is corner flashing nylon tape that goes behind the seams. Then you will silicone over the top of the seams.

A:  Hello, Thanks for your interest in our FlexStone products. If you are talking about behind our panels you would just need standard studs behind.

A:  Hello, the trim pieces are required for installation as the edges of the panels are not finished. You can, however, cut the panels and trim pieces down to your desired dimensions using any style of power saw with a fine-toothed blade.

A:  Hello, the corner shelf included in our wall surround kits is 15" along the front edge. Our other shelf option is a shave shelf - which is intended to be used when shaving legs and has a non-slip texture. Please let us know if you have any other questions.

A:  Hello, our trim pieces are 3 inches wide and 1/4 in thick. That glass enclosure should work just fine with our materials, but you'll want to check with that manufacturer on if they have any specific requirements for installation. Please let us know if you have any other questions.

A:  Hello, we strongly recommend against the use of plywood backer and instead recommend the use of Green board or cement board. Please let us know if you have any other questions.