Q:What is the size of the hole that needs to be drilled and what depth?
by|Feb 19, 2016
2 Answers
Answer This Question
A: 3/8 inch
by|Oct 22, 2022
3 found this answer helpful
A: 25/64, depth depends on screw head shape and size. experiment on a piece of scrap wood
by|Oct 25, 2023
5 found this answer helpful
Q:how many in a package
by|Feb 13, 2016
5 Answers
Answer This Question
A: The product details says 50 pieces.
by|Jul 8, 2022
1 found this answer helpful
A: Package is marked 50 and actual count is 50
by|Jul 8, 2022
1 found this answer helpful
A: There are 50 button head plugs in each set.
by|Jul 8, 2022
4 found this answer helpful
A: I bought 2, one had 17 other had 19. good luck with that.
by|Jul 8, 2022
1 found this answer helpful
A: Packaging says 50
by|May 3, 2023
Q:does this cap fit a 1/2 inch hole opening?
by|Aug 6, 2015
3 Answers
Answer This Question
A: Short answer, no.
Long answer, no. The "Slightly tapered plug body to ensure a tight secure fit" will make the plug loose in the 1/2 inch hole. The button head may stop at the 1/2 inch hole but my guess is that it might just go into the hole. You would still have a 'hole' as the button head would be inside the hole and a gap would still exist around the top side of the button head and hole.
Also 'cap' would not be the correct reference to this item as it is a plug.
by|Nov 30, 2015
3 found this answer helpful
A: For a 1/2? hole, you need a 1/2? plug - General Tools product #312012.