Questions and Answers for Hampton Bay Cade 11.7 in. 2-Light Brushed Nickel Bathroom Vanity Light Fixture with Frosted Glass Shades

A:  Please call our customer service department for additional assistance. 800-446-9092

A:  There appears to be another light fixture by Hampton Bay in Cade 3 - Light Brushed Nickel Vanity Light - here is the description on the Home Depot website - "Cade 3-Light Brushed Nickel Vanity Light with Frosted Glass Shades, Dimmable LED Daylight Bulbs Included" - I couldn't find the UPC barcode due to it being OUT OF STOCK. Further, the description includes this - "4-Pack Ecosmart A19 Dimmable LED Daylight Bulbs, Included" Maybe call Home Depot about this product. Good Luck. We shop supplies at Home Depot very often. Good service.

A:  This light can be used with LED bulbs and be dimmable. Please be sure to make sure you are using LED bulbs and a dimmer that are compatible. thank you!

A:  Absolutely. all you need are dimmable bulbs and a dimmer.

A:  This fixture uses standard medium base bulbs. (A19 I think is the designation). You can use LED bulbs. As long as you use dimmable LED bulbs, and a dimmer that is rated for LED bulbs, it will be dimmable.

A:  Yes to both of those questions. We mounted ours with the globes down and have 3 of the across the wall over our Vanity counter. A total of 9 bulbs with only 6 watts per LED bulb is a great savings

A:  Clearance will be tight. From box mounting screws to bottom of glass shade (mounted downward facing), it is 8". Also watch depth of medicine cabinet. This light works best (in downward position) with a mirror or medicine cabinet that does not project out into the bathroom more than an inch or two.

A:  I believe you would have an issue opening the medicine cabinet door with the light orientated that way.

A:  Hi Andyrosco, fixture is 9.5 height and the Mounting Deck is about 4.52 Height. 8" should be enough space for the doors to open/close. If you nee additional information please contact us at 1800-466-9096.

A:  Yes, it will fit and the door will swing properly. From the center of the mounting nut to the outside of the glass is 7-1/4", leaving 3/4" margin in this instance. It is unfortunate the manufacturer does not provide this detail in their drawings.

A:  HI Erica, In-store store associate can help you place a special parts order for this fixture.

A:  mine is not yellowish, just white

A:  Only if u use regular bulbs. I use daylight bulbs and they are not yellow.if the bulbs u use in any light do not say daylight on them they will put a yellow glow on any lamp u use. I love a bright white light so I have changed out allof my bulbs. You don’t have to use as high of voltage as regular bulbs either.

A:  no. the glass is frosted white. i used clear bulbs and the light is white.

A:  Depends on type of light bulbs I use led daylight

A:  No, it is frosted white.

A:  No, the glass is white frost. Also depends on bulbs used.

A:  yes, we use it that way

A:  As long as the bulbs you put in are dimmable, then yes.

A:  I have mine on a dimmer, just make sure the dimmer is compatible with whatever type light bulbs you use.

A:  Yes you may, you need to make sure that you use dimmable bulbs

A:  I believe you could, but it probably depends more on the bulb than the fixture. Be sure to use bulbs that are dimmable.

A:  yes

A:  Surely. You can use any sort of a19 bulb.

A:  I don't see why not, as long as you have the right control switch for them. We use LED bulbs in ours in order to save on electricity.

A:  Yes. That's not saying that HD carrys it. It should show up below the description along with "others you may like", etc

A:  This item is only available in a 2 and 3 light at this time, thank you for your question.

A:  Distance between glass globe and wall plate is about 2 inches. I built a box that was 5 inches deep, attached light to it, attached box to wall. My medicine cabinet is 5 inches deep. I'll add a pic! Other option is to place it super high above your cabinet.

A:  I looked this morning and it's approximately 2" between the globes and the wall. Hope this helps. T

A:  It is 1 3/4 “ from Wall. Great product.

A:  They measure about 2 inches, so your adaption will be very tight.

A:  Definitely brushed. Not shiny.

A:  Mine was definitely Brushed Nickel. Has been installed for over a year now, and is still like new. I use LED bulbs. Am very pleased with fixture.

A:  It is " brushed" nickel. It is not a polished/ smooth/glossy finish. Matches brushed nickel bathroom fixtures nicely

A:  It’s definitely brushed chrome

A:  It is brushed nickel