Questions and Answers for Husky 1/2 in. Drive 100-Position Low-Profile Long Handle Ratchet

A:  Steve, This Ratchet is backed by Husky Lifetime Warranty.

A:  Make sure you keep your receipt, because they don't honor the "no receipt" situation anymore.

A:  It is a 3/8" ratchet. Any 3/8" drive attachment will work.

A:  Haven't tried any other brand sockets but I believe they should work

A:  All 3/8 sockets will work.

A:  Matt, This ratchet has a standard 3/8 Drive tang, this will work with all 3/8 sockets, adapters, and extensions.

A:  Hello, Yes, the handle portion of this ratchet is approximetly 4 inches long. The had is another 1-3/4 inches for a total tool lenght of 5-3/4 inches.

A:  I had the same problem today while doing a oil change on a big box truck I was lying on the ground and under the truck and could not switch from off to on

A:  That doesn't sound good I would take it back to home Depot as it has a warranty and get a new one. You shouldn't have to work on

A:  Hey, There was a machining issue on the initial run that we corrected. We’d be happy to replace it free of charge. Please return it to the store or feel free to call 888-434-8759 (option 2) for further assistance. Thanks!

A:  NO. But I don't see where that would matter much.

A:  Hey Don, The gimbal palm ratchet does not have a position lock but the way it is gripped prevents the unwanted movement commonly seen in flex head ratchets. Thanks!

A:  No

A:  No

A:  No. The gimbal does not have a lock. That being said the gimbal movement is somewhat stiff and not sloppy. I have found it able to hold a position while tightening or loosening fasteners.

A:  The screws are part of the manufacturing process. The gimbal action swivels on these screws. If you look closely there are also a pair of these screws on the chrome ring that do the same for the inside section of the tool.

A:  It just pivots off of that for a different angle you can hold

A:  Jim, The part you are referring to are two torx fasteners that hold the outer ring on to the ratchet.

A:  It's the swivel axis for the gimbal action.

A:  It's where you plug in the charger

A:  It is just a recessed screw that acts as a pivot point for the ring/handle that allows it to function as a universal joint when working at odd angles.

A:  Hi Jose, we currently only sell Husky Black sockets in a set. Model H100105MTS will have this size for you.

A:  I believe the only black sockets they sell are in the black mechanics sets (H100105MTS) They only sell the chrome sockets individually unless you want to by impact sockets. I have the 100 positions ratchets in all three sizes and purchased the Husky 200 piece socket set (H200MSS) to to go with them. This set has just about every size socket Husky makes.

A:  YOU'LL HAVE TO ASK A HOME DEPOT ASSOCIATE THAT QUESTION.

A:  Hi Travis, this ratchet is manufactured in China.

A:  I am pretty sure they are NOT made in the US. According to Wikipedia they were originally made in the US by Black&Decker; Apex Tools; and Western Forge among others...However they do come with a life time warranty. If you are not hung up on only "made in the usa" you can't go wrong with these tools. I personally tend to go with the made in the us tools but I have purchased many Husky tools with no problems.