Questions and Answers for InSinkErator 3 ft. Power Cord Installation Kit & Dishwasher Connector Kit for InSinkErator Garbage Disposal

A:  I believe all garbage disposals are the same same size where the drain line from the dishwasher connects, so I don't think you'll need this.

A:  Hi Kev, if you're going to attach your dishwasher to your new disposer and the current hose doesn't fit the connection on the disposer, you may need a Dishwasher Connector Kit.

A:  I found out I didn’t need it, but I will keep the connect for future

A:  The connector fitting is 1/2

A:  Hi, the size of the electrical connector is 3/8".

A:  The sizes cover all that are commonly used. The largest is 1 inch. Just trim to fit.

A:  Hi Paul, thanks for reaching out. The connector fits 1/2", 5/8", or 3/4" hose connections.

A:  Do not know why these clamps(3) were not listed. Sizes are 1/2 inch, 3/4 inch and 1 inch.

A:  The supported sizes are 1/2, 5/8, and 3/4 inch dishwasher line input line sizes. Notably, the 7/8 inch size is NOT supported.

A:  15 amps intermittent use, but really should only be 10 amps same usage as most home disposals are not going to draw the same power or be used as much as a heavy duty restaurant grade disposal. Why 15 amps you ask, well this has to plug into a outlet and the kind of outlet it is made to plug into is rated for 15 amps.

A:  I bought one a while back and it’s only 10amps. Is it okay to use?

A:  I called the company today and this is 16gauge wire is rated for 13amps.

A:  the amps are what the Appliance is asking for. Amps is the size of the wire.

A:  Yes it can be hard wired. I actually purchased a plug kit because my original one was a plug in and this model leaves it up to the installer whether to hard wire or not.

A:  yes you can hard wired

A:  No it is an electrical plug. You will have to install an electrical box and recepticle

A:  Yes, it actually comes prepared for hard wire installation, which I thought was being phased out.

A:  Hi AJ! Yes, InSinkErator residential disposers can be hard wired. Power cord is sold separately for installations where a power outlet is present.

A:  Yes it was very helpful and easy to install. Kim

A:  Hi Jill! For best results, we recommend you use InSinkErator parts and accessories with InSinkErator units. I suggest you reach out to the manufacturer of the disposer. Have a great day!

A:  Yes

A:  Yes. This is what I bought along with my new Waste KIng garbage disposal. It fits fine.

A:  To my knowledge yes it will.

A:  Yes, it will fit to any InSinkErator® household disposer models.

A:  We ended up taking it back it would not work with what we had!

A:  Hello Elpatio, Your strain relief line is typically 7/8 thick thick, but I guess it could be different on different garbage disposals. All you have to do is get your tape measure and measure it.

A:  The strain relief fits a 1/2 conduit knock out.

A:  Hi! If you're referring to the disposer's electrical connector, the size is 3/8".

A:  Yes, it's very easy to install. There are two black wires coming from the cord, it has smooth & ribbed sides. You have to connect the smooth side to the black wire and the ribbed side to the white wire. The ground wire of the cord should be properly secured to the screw of the disposer. Hope this helps!

A:  yes it is.

A:  Sure is. Very straight forward.

A:  This power cord is very easy to install in your disposal. I always use a new cord whenever replacing a unit rather than using the old original cord. This way you are sure it is in excellent shape and proper for your unit.

A:  Yes. It was very easy to install. It was my first time and I was able to connect the power cord in less than 3 minutes.

A:  Yes

A:  Very easy to install on the disposal all parts included!!!

A:  yes

A:  Can’t say yes for certain. This is the cord I have for a 3/4 hp disposal. It’s a typical general purpose heavy duty disposal type cord.

A:  Yes this will work fine for that.