Questions and Answers for Johnson Hardware 1510 Series 36 in. x 80 in. Primed Pocket Door Jamb Kit

A:  No just the jamb kit

A:  This kit does not come with a door or any hardware. Just 5 pieces of wood

A:  No, this is just the finish jamb kit to finish out the trim around the opening.

A:  Just the special jamb needed. No trim kit was included in the jamb kit I bought. I bought a separate trim material (to match the other, pre-existing doors in my home)

A:  This kit comes with 5 pieces of wood. It comes with the split header jambs, split jambs for the pocket opening and the strike jamb that the door shuts into. It would not have casing for the wall and base. That you would have to supply to match the rest of the house.

A:  One side only

A:  Comes with the striker plate 2 top pieces and 2 door side pieces to provided a completed inside and outside trim

A:  Yes, youll just have to cut the top frame pieces down to fit. I cut mine down for a 24" door

A:  Yes, you can cut the split jambs to work for a 30" door.

A:  It comes with 5 pieces of wood. The strike jamb, the two split header pieces and the two split jamb pieces for the pocket opening.

A:  It's 5 pieces. Whole jamb for one side (1), split jamb for other side (2), and split jamb for top (2). Measure twice, because you don't get any do-overs. Good Luck.

A:  Yes, the rough opening dimensions account for the finish trim set. You don’t need to alter anything.

A:  Make your rough opening as instructed by the manufacturer of the pocket door. Then install the pocket door. The trim will go over the rough opening. Hiding your cut. Just as a normal household door

A:  The strike jamb is 4-9/16" wide. The split jambs are 1-3/8" wide.

A:  Striker side ~4⅝". Door side ~1½"

A:  We use the same packaging for both the clear pine and primed jam kits, because it is obvious based on the product as to whether it is primed or clear wood.

A:  Yes, you can cut it down to fit a smaller sized pocket door opening.

A:  Yes, it’s cut to size. I had to trim mine.

A:  Unfortunately, I’m not sure what plastic trim pieces you’re referring to. Feel free to call us at 800-837-5664, and we can figure out what you’re trying to get your hands on.

A:  Yes, we make a 15113068 Clear Pine Jamb Kit, but it is not available in stock in the store or at homedepot.com. You can special order it from your local Home Depot, though.

A:  Well you can't special order the clear pine for staining, according to Scott in millwork Homedepot in Dewitt. I was looking for oak but he could not help me with the either.