Questions and Answers for Loctite GO2 All Purpose 1.75 fl. oz. Glue

A:  HandyGirl1, I've successfully used Loctite GO2 All Purpose Glue to join pieces of plexiglass together front to back and edge to edge. I also use it regularly to glue items to a plexiglass poster-board and they don't break off. Be certain to clean the surfaces thoroughly with a dry lint-free cloth before applying the glue to both surfaces. Use the GO2 sparingly so that it doesn't run or bulge from the glued joint. Doc766

A:  Thank you for the question. The Loctite GO2 Glue will bond to polycarbonate plastic like Plexiglas

A:  Thank you for the question. It is possible but not guaranteed. The GO2 glue was not designed for automotive use and may not meet your expectations. There are automotive products better suited for this purpose.depending on the material composition

A:  Thank you for the question. The answer is no, the Loctite GO2 glue is not suitable for this intended use. You should consult the appliance manufacturer for proper repair options.

A:  The Loctite Go 2 Glue is not a cyanoacrylate adhesive. It is what is described as a hybrid technology or silane moisture curing polymer.

A:  Thank you for the question but not knowing the what kind of tile you have or the nature of the project it is difficult to provide a proper response. The Loctite GO2 Glue will bond to many materials but the successful use of the product depends on many variables. In situations like this it is recommended you test your intended application first before proceeding with the project.

A:  Yes, it works on tile

A:  Yes, it is possible to paint over Go2 Glue when fully cured. Loctite Go2 Glue is compatible with acrylic paints, polyurethane-based varnishes and alkyd resin varnishes. When using alkyd resin paints drying may be delayed. It is not compatible with one component polyurethane paints.

A:  Yes, you can paint over it after it dries.

A:  Yes

A:  Excellent

A:  Yes

A:  The Loctite GO2 Glue is not tested not for food safety and therefore is not classified as food safe.

A:  Thank you for your question. The Loctite GO2 Glue will bond rigid polystyrene foam. However, best practice in this case would be to test the intended application first to determine if the results you are expecting are suitable and meet the project requirements.

A:  Yes, it will work on foam model airplanes

A:  Yes just use lightly