Questions and Answers for Lutron Skylark Contour LED+ Dimmer Switch for LED Bulbs, 150-Watt/Single-Pole or 3-Way, Light Almond (CTCL-153PDH-LA)

A:  Hello, thank you for your question. We are sorry to hear about the issue you have encountered with your dimming application. This is likely a location-specific form of LED incompatibility known as neutral interaction, which is effectively the manifestation of electrical interference/line noise of something else on this same circuit causing a performance issue with adjacent lighting when a dimmer is introduced to the circuit. The most common fix for this is to use a neutral-based dimmer, such as model PD-5NE: https://www.homedepot.com/p/Lutron-Caseta-Smart-Lighting-Dimmer-Switch-for-ELV-Bulbs-250W-LED-Bulbs-White-PD-5NE-WH-PD-5NE-WH/300674736 We hope this helps! If you would like further information or would like to discuss options, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.

A:  Hello Mike, thank you for your inquiry! Yes, the CTCL-153P is a Triac dimmer. Here is a link for the full specs of the CTCL-153P:https://assets.lutron.com/a/documents/369683.pdf If you still have further questions or concerns, please contact our Support Team at support@lutron.com or call us at 1-888-LUTRON1. We're here 24/7, you can call us any day or anytime.

A:  Hello Samuel, thank you for your inquiry! Yes, the CTCL-153P will work in a 4-way application with mechanical 3-way and 4-way switches. The dimmer will be installed on either 3-way location. Please see the link for the installation guide: https://webtools.lutron.com/wiringwizard/us/en?id=r95&p=q1,q71:a88,r95&mn=ctcl-153p If you still have further questions or concerns, you can contact our Support Team at support@lutron.com or call 1-844-LUTRON1.

A:  Hello, thank you for your question. The Skylark Contour LED+ Dimmer is able to be installed in a single pole (two-wire + ground) or 3-way (three-wire + ground) application. For your application, you will only need to use the black and red solid wires on the dimmer, plus ground, and cap off and not use the red/white-striped wire. And yes, the black and red wires on the dimmer are interchangeable in a single pole application. See the below spec sheet for more information: https://assets.lutron.com/a/documents/369683.pdf We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.

A:  Hello Riley, thank you for your question. The Skylark Contour LED+ Dimmer requires a U.S. wallbox 2` in (64 mm) deep minimum. See the below spec sheet for dimensions and more information: https://assets.lutron.com/a/documents/369683.pdf We hope this helps! If you require further assistance, our 24/7 support team is here to help. We can be reached at 1-844-LUTRON1 or via email at support@lutron.com.

A:  Thank you for your inquiry. We're here to help! Please reach out to our Support Team at support@Lutron.com or give us a call at 1-844-LUTRON1 for additional assistance.

A:  Hello Dave, thank you for your inquiry! The CTCL-153P is rated only for 150W CFL/LED or 600W Incandescent/Halogen single pole/multilocation. Please click on the following link for the full specs: https://assets.lutron.com/a/documents/369683.pdf If you still have further questions or concerns, please contact our Support Team at support@lutron.com or call 1-844-LUTRON1. We're here 24/7, you can call us any day or anytime.