Questions and Answers for NEOPERL Brass Small Snap Fitting Adapter

A:  No the small snap fitting alone is only available online on HomeDepot.com, but if you need a small coupler and fitting assembly it should be at your local Home Depot store. The small coupler and fitting assembly is store SKU#1001551327.

A:  If your faucet and hose has thread sizes that are compatible with HomeDepot.com Internet #206321179, which is a coupler and fitting combination, we think that would work best for your connection. The fitting on top is dual thread and can fit most standard size faucets with male 15/16 in.-27 or female 55/64 in.-27 threads. The bottom is a quick disconnect coupler that is designed to attach a 3/4 inch female garden hose. Here is the link to this item on the HomeDepot.com website. https://www.homedepot.com/p/NEOPERL-Dual-Thread-by-3-4-in-Brass-MGH-Small-Coupler-and-Fitting-37-0293-98/206321179

A:  We were unable to confirm the thread size of your faucet based on the information we found online, but it appears that you may have a small 3/4"-27 female aerator. In conjunction with the snap fitting, you can try the adapter that is Home Depot internet #202243064/store SKU#590833 which has top threads female 3/4 in. - 27 and bottom threads that are male 55/64 in. - 27. Keep in mind that the use of multiple adapters may cause leaks.

A:  Sorry it is difficult to answer without more specific information on the thread size needed.

A:  Don’t quite understand the question but this works as a set. You have a adapter and a coupler and Home Depot carries both small and large coupler. You have to make sure you use the same size as a set. 

A:  A small set of channel locks or slip joint pliers. Make sure to wrap the pieces with rag so you won't mar the surface with the tools. Once you have loosened the fitting you can usually turn by hand.

A:  If you bought the dishwasher, you don’t need anything. It comes with that faucet attachment. I ordered one and didn’t need it. 

A:  This is only one half of the two. This half calls adapter and the other half calls coupler. Be aware that they come in two sizes, 3/4" and 1". The best way is to buy the whole set at a time to avoid mismatch.

A:  The small snap fitting is dual threaded to fit most regular size faucets. It can be used with the small snap coupler for quick disconnect Internet#205379585.The coupler makes an easy connection from your faucet to a hose/appliance.

A:  Mine comes off easily by twisting it clockwise.

A:  You would turn it to the left to remove. You may have lime build up on your threads. You should put some white vinegar and water in a baggie and attach it to your faucet spout with an elastic so you can soak it for a long time. This should help to loosen the lime build up you may have. After you remove it, use an old toothbrush on the threads to brush away any excess lime and run it through water to rinse thoroughly.

A:  This small snap fitting adapter is dual thread and designed to fit faucet spouts with 15/16"-27 male threads or 55/64" female threads. It has a small diameter snap nipple bottom that can be used with a hose and a hose clamp, or if you would like to connect a garden hose it can be used in conjunction with the small snap coupler available on HomeDepot.com, SKU# 205379585. To confirm that this connection will work with your portable dishwasher it would be best to contact your dishwasher manufacturer.

A:  Unfortunately I couldn't say as my dishwasher is not a Whirlpool; however I believe it's a fairly standard size, and at the price there's no harm done in giving it a shot

A:  This adapter will thread onto a standard size faucet spout that has 15/16"-27 male or 55/64"-27 female threads. It is normally used in conjunction with a small snap coupler, HomeDepot.com Internet #205379585, for a quick disconnect to a 3/4" garden hose. If you are unsure of the thread size of your faucet it would be best for you to contact the faucet manufacturer.