Questions and Answers for RIDGID Pneumatic 18-Gauge 1-1/2 in. Finish Stapler, Contractor's Bag and (200) Staples

A:  No that is not the intent in my opinion. If it for construction see guidelines codes.

A:  Hello LeonR, You can use this RIDGID 18-Gauge 1-1/2 in. Finish Stapler, Contractor's Bag and (200) Staples R150FSF for interior and exterior finish and trim work. I hope this helps and we appreciate your interest in RIDGID! - Eve

A:  Hi Jim, thank you for your question. The smallest fastener that can be utilized with this stapler is 3/8 in.

A:  Thank you John for your interest in RIDGID. I apologize the nailer would not be able to take a 7/32" crown only 1/4". ~ Best Regards, Alexandria

A:  As far as I know it can. I have used several different sizes and no issues.

A:  Should be able to. Might have to adjust air pressure for the thickness of the underlayment but has plenty of power.

A:  Thank you for contacting us. You may use this tool for the purposes listed below:  Finish and Trim (Interior and Exterior)  Floor Underlayment  Cabinet Work  Casebacks  Furniture  Light Trim Moldings  Fascia and Soffits  Drawers  Staircases  Carpet installation  Mirror and Picture Frames  Crafts  Lattic

A:  Yes just get staples long enough to puncture the siding and long enough to hold up well.

A:  Thank you for contacting us. As long as you use the recommended staples it should be right for the job.

A:  Think so. I have not used it like that before but there's a dial on it for adjusting.

A:  Thank you Lilmax for your interest in RIDGID. The finish stapler R150FSF depth can be adjusted for above surface use and can also be used for wire fencing. ~ Best Regards, Alexandria

A:  It takes several different sizes. Look on side or check book.

A:  Hello Brad! Yes you can. The specifications for the Fasteners are 18 gauge staples, Fastener Range is 3/8 in. to 1-1/2 in. and the Crown Width is 1/4 in. I hope this helps, and thanks for your interest in the Ridgid Brand! - Eve

A:  Please send all inquires with concerns about pricing, promotions, and stock availability to Home Depot, they can be reached at 1-800-466-3337. Also check their website for changes in stock availability at www.homedepot.com. Thanks for reaching out to us! Regards, JJ

A:  I think you can have them shipped to your home or local Homedepot.

A:  lot of ifs in this one, 1 1/2 if close enough together, If yellow pine vs white pine wood, if the soil is not a yard deep, In jest but area was not mentioned so maybe Yes

A:  MaxPower, Thank you for contacting us about the RIDGID 18-Gauge 1-1/2 in. Finish Stapler, Contractor's Bag and (200) Staples. I would recommend you contacting someone in RIDGID technical support for that question, due to some follow up questions. For technical assistance you may contact us at 866-539-1710 Monday through Friday 9am-6pm (est). Regards, JJ

A:  Hello Cuda! We only recommend using crown finish staplers that are 18 gauge with a fastener range of 3/8 in. to 1-1/2 in. and a crown width of 1/4 in. I hope this helps! -Eve