#1 Home Improvement Retailer

Questions and Answers for ROMABIO 4 Gal. Nube Gray Limewash Interior/Exterior Paint

Internet #303053836

Model #101154

Store SKU #1002726190

  • Unique white wash effects for unpainted brick, stone and more
  • Breathable, UV-resistant and will not peel or chip off
  • Non-toxic formula is mold resistant and maintenance-free

Questions & Answers

71Questions
caret
Q:Is the clean up easy??? Doing exterior chimney, garden area Clean up???
by|Jun 4, 2019
1 Answer
Answer This Question

A:  Give us a call here at Romabio for the best assistant and answer.

by|Jun 7, 2019
    caret
    Q:Is it safe to use a concrete sealer over this? Planning to use on my patio pavers.
    by|Apr 28, 2019
    1 Answer
    Answer This Question

    A:  We recommend it not to be used on horizontal surfaces a patio,porch or steps just to give a few examples.

    by|May 11, 2019
      1 found this answer helpful
      caret
      Q:About how much will I need for the exterior brick my 1,900 sq for home?
      by|Apr 25, 2019
      1 Answer
      Answer This Question

      A:  You can get purchase one 15 liter bucket and one 2.5 bucket which gives you giving it a estimate of 1515-2100 sf. Hope this helps.

      by|Apr 29, 2019
        caret
        Q:Do you have to “wash off”/ distress or can it be left more opaque?
        by|Apr 25, 2019
        3 Answers
        Answer This Question

        A:  We left it more opaque/did not distress it. It turned out perfectly.

        by|Mar 2, 2022
          1 found this answer helpful

          A:  You can leave it fully opaque and let it self distress and give you an antique look overtime.

          by|Mar 2, 2022
            1 found this answer helpful

            A:  I didn't wash off any and it is opaque.

            by|Jul 24, 2020
              caret
              Q:Plans to use the gray but worried it may be too gray. Could I go back over with one of the shades of white?
              by|Mar 6, 2019
              1 Answer
              Answer This Question

              A:  It will more than likely run on the mortar, there's no real way to avoid that unfortunately.

              by|Mar 12, 2019
                caret
                Q:if it comes in contact with it during stone limewash application?
                by|Feb 2, 2019
                1 Answer
                Answer This Question

                A:  In order for the limewash to properly bond and cure it has to be on a raw substrate that being brick or stone.If you splash water on the substrate and it doesn't soak it in then its not a raw surface. If the surface already has paint be sure to use a primer first and then apply the limewash.

                by|Feb 11, 2019
                  caret
                  Q:Can this product be used over a travertine tile backsplash? It is not sealed.
                  by|Jan 23, 2019
                  1 Answer
                  Answer This Question

                  A:  As long as the Travertine is absorbent than you can indeed apply this product.

                  by|Feb 16, 2021
                    1 found this answer helpful
                    caret
                    Q:Can I use on wood floors?
                    by|Jan 18, 2019
                    1 Answer
                    Answer This Question

                    A:  If you're going for a ceruse finish, it will work great. Maybe try a test patch and see if you like it. Give us a call at 678-905-3700 ext. 426 and our Customer Service team would be more than happy to assist further.

                    by|Jan 18, 2019
                      caret
                      Q:Can this be used on a travertine backsplash in the kitchen. Application recommendations?
                      by|Jan 15, 2019
                      1 Answer
                      Answer This Question

                      A:  If the surface is porous and absorbent it will work. Please call us at 678-905-3700 ext.416 and our Customer Service Representative will be happy to assist further.

                      by|Jan 15, 2019
                        caret
                        Q:Can the different colors be mixed together? I want a very very light gray tint.
                        by|Oct 27, 2018
                        3 Answers
                        Answer This Question

                        A:  We do not recommend mixing colors. Call us at 678-905-3700 to troubleshoot this further.

                        by|Oct 29, 2018

                          A:  Nube gray is a very light gray, I don't see why you couldn't mix colors but I haven't tried that

                          by|Feb 11, 2020

                            A:  Look at the picture in my review where I used straight Nube Grey. It is not very grey at all. If you mixed it with something else, it would be even less so.

                            by|Jul 24, 2020

                              Frequently Bought Together

                              +
                              +
                              Price:
                              $199.90