Questions and Answers for Rev-A-Shelf 19 in. H x 20.75 in. W x 22 in. D Base Cabinet Pull-Out Chrome 2-Tier Wire Basket

A:  On this unit, the bottom of the lower shelf sits 2" off the cabinets base. The upper shelf has 2 sets of mounting holes which will put the bottom of the upper shelf at either 10" or 12" above the base of the lower shelf. The top of the upper basket will be either 17" or 19" off the cabinet base.

A:  Bottom to top is 20.5 inches. Yes, there are 2 different heights for the top shelf

A:  MINE is 171/2 in from the kitchen floor. it is adjustable during assembly 2 in higher to 4 in lower in 2in increments. space between my shelves is 10" we split the diff. to maximize our storage needs of equally sized pans. if I had taller stuff I would assemble it in the shortest configuration and use the top shelf for the large stuff because there is more freeboard at the top of the cabinet, and I don't like bending over anyway ;>}

A:  You have several heights you can make the top shelf when you put this unit together. Once it’s installed, no, you can’t then adjust it where you want. You’d have to uninstall it and reposition the top shelf to a different height then reinstall. The distance on mine is about 12” between the two shelves. I can fit most household cleaners in between, as long as they aren’t a supersized container. Hope this helps you decide.

A:  For each shelf, the side rail is 6" from the bottom of each rail to the top.

A:  The side rails are 6” from bottom of rails.

A:  They are just under 5 inches.

A:  Yes. Full extension. Very sturdy and worth the price.

A:  Yes

A:  Yes, the shelves are fully extendable.

A:  Yes, the shelves pull completely out.

A:  Yes, they are mounted to the base of the cabinet, not the sides.

A:  Yes you could mount side by side.

A:  If your current shelves are adjustable or can be removed, then the 19 inch height would work. I installed several of these in lower kitchen cabinets that had a 21 inch height and they work great! I would suggest that if this is going to be mounted onto adjustable wooden shelf, you secure the wooden shelf to back of cabinet with L bracket or some other type of brace. This will keep adjustable wooden shelf from tilting "up" under weight of extended rev-a-shelf unit, once it is loaded with pantry items.

A:  Yes. These pull-outs are fastened to the bottom and back of the cabinet, not the sides. It would be easy to mount them side by side.

A:  I am not sure that I understand what you have. If you have a cabinet with a shelf in the same space where the unit will go, the shelf will have to be removed. If that leaves a conventional cabinet or similar space with an opening of at least 19+" high, then yes you can securely mount 3 separate units. The unit attached in 3 places: the inside vertical edge of one door frame, the floor of the cabinet and the back of the cabinet (with an adjustable depth bracket). Two units can be installed in the 33.5" wide opening...one attached to each of the side door facings. One can be installed in the 16.75" wide opening attached to either side of the door facing.

A:  Yes, it has two position to fit your needs. The one show in picture is in high position.

A:  Yes the top basket can be lowered to reduce the overall height by 2"

A:  Yes it can.

A:  Frame has holes for top shelf to be either at 12 inches or 14.

A:  The height of the top shelf (bottom too, for that matter) cannot easily be modified. You'd have to precisely drill holes in the side straps (3/16"?) and possibly tap them. If it were important to me I'd try it, because I love these units, but they were not meant to be adjustable height, and I bet very few people do it on their own.

A:  The dimensions given are the outside dimensions. The unit should easily slide into the cabinet door opening. Don't know about the larger sized one - you may have to check REV-A SHELF's website.

A:  I don't know about the special order, but I got several units of various sizes last year and they are great!! The dimensions given are the minimum inside (open space of the cabinet door) measurements of the cabinet. The outside dimension of the product is slightly less than the given dimensions. We are very happy with ours. I installed them myself.

A:  The dimensions given are the outside dimensions of the product. Total height of 19 in. is only if you use the top holes to attach the top shelf. I used the lower holes so my total height is 17 in. If your cabinet opening is 21 in. high and 15 in. wide and you have regular hinges that don't stick out into the opening you should be OK. The back brace is adjustable in and out so cabinet can be a little deeper than 22 in. but not too much. I ordered 2 of the 20.75 in. for two of my larger cabinets from HD no problems

A:  These are outisde dimensions. 14.75" is the outside dimension, but the basket that slides in and out of the cabinet is only 14-1/4" inches. You can order the large version online. 5WB2-2122-CR is the part #

A:  Yes, there are three different positions

A:  Yes

A:  Kind of. You can choose 12" or 14" above the base of the cabinet.

A:  It has two sets of mounting holes. one at 10" and one at 12"

A:  yes, this one has 2 adj, also cabinet cookware has 2 adj SKU 626150.

A:  The widest dimension that pulls out is 14". You only need to worry about the doors, not the hinges. The slide extensions and the baskets (with the top basket in the lower of two positions provided) aren't in line with typical hinge locations. Hope this helps.

A:  Yes the product will fit. The drawer is 4.25 in so it will slide out without hitting the side

A:  This unit is for cabinet openings of 15" width or more. It will not fit into a 14.5" wide opening.

A:  Yes they worked very well in my cabinets it's the same size as yours I don't have any interference with door hinges. I love them.

A:  The overall product is 14.75" wide, but the part of the product that slides out is only about 14.25" wide. Ideally if you have at least 14.5" or larger you will be fine.

A:  Sorry no. Width of unit is 14.75 inches. All metal so no give

A:  Are you measuring from slide to slide or from outside to outside? You have to count the upright supports that will extend the outside to outside dimensions. The part that slides in and out of the cabient is only about 14.25" when extended. When the unit is completely closed inside of the cabinet it is right at 14.75".

A:  The exact measurement from slider to slider is 14.25". That is without the two holding rails.

A:  It’s hard to see in that photo, but the baskets actually have a metal frame outside of the sliders, which is the widest point your space needs to accommodate. Outside frame to outside frame is 14-5/8 inches. Slider to slider is 14-1/4 inches. Hope that helps!

A:  My 15" wide cabinet has a slider to slider with of 11 and 1/4" but with the bracket it's 11 n 1/2 " wide

A:  Hello - I bought this and the actual basket that rolls out is just under 14 inches. I bought several different sizes for several cabinets. We installed them ourselves over a year ago and I absolutely love them! No problems. Roll out perfectly. Everything fits. It was a whole lot cheaper than buying new cabinets with drawers on bottom...

A:  From outside edge of slider to outside edge looks like 14.5". It fits within the 15" opening of my cabinet.

A:  I am not sure. The closest store to me is over 2 hours away. But it shipped very quickly and I love it and we installed 3

A:  I believe it is an online only item, none of the stores near me stocked it.

A:  Not in my area. I ordered mine online on the Home Depot ap. They arrived at my local store in just a few days.

A:  I wasn't able to locate it in any stores near me but I ordered it online and it arrived as expected. It had a broken clip but Rev-A-shelf sent me brand new tracks and all is good.

A:  It wasn't available in my local HD. Had to order it on-line.

A:  NO Home Depot doesn't stock any Rev-A-Shelf in their stores.

A:  No, it is not available in the stores, but when I ordered it on-line, it came very quickly. It was easy for us to install and we love it.