Questions and Answers for Rust-Oleum EpoxyShield 90 oz. Clear High-Gloss 2-Part Epoxy Interior Low VOC Premium Concrete Garage Floor Paint Top Coat Kit

A:  Hi Bob, our RockSolid Marble Additive is designed for use only in our RockSolid Universal Base, and should not be mixed into our EpoxyShield Premium Clear Garage Floor Coating. - Rust-Oleum Product Support 2

A:  We actually do not recommend directly applying the deocrative chips to the Rust-Oleum Epoxyshield Premium Clear Coating. This will cause the clear to look clumpy and not provide the best finish. Instead, apply a layer of the clear, and gently broadcast the decorative chips into the floor, following up with another coat of the clear. We hope this helps! - Rust-Oleum Product Support 1

A:  Thank you for reaching out! Rust-Oleum EpoxyShield Garage Clear Top Coat is intended for use over other two-part coatings only. This will ensure lasting results with the coating and ensure full durability. This product must also be applied over other floor-grade coatings. - Rust-Oleum Product Support 3

A:  Thank you for reaching out! Yes, a second coat of our EpoxyShield Premium Clear Garage Floor Coating may be recoated within a week as long as the surface is clean. You can wipe the surface down with a solvent such as acetone just before recoating to ensure any surface contaminants are removed. - Rust-Oleum Product Support 2

A:  Thank you for reaching out! Once our EpoxyShield Premium Clear Garage Floor Coating has cured for at least 7 days, it is fine to mop the surface with a detergent and water. We do not recommend pressure washing the surface, since it is possible to damage the coating if too much pressure or too narrow a nozzle is used. - Rust-Oleum Product Support 2

A:  Hi Amanda, thank you for reaching out! Yes, once our EpoxyShield Premium Clear Garage Floor Coating kit has been applied and allowed to cure, it can handle these low and high temperatures easily. The temperature during the application is important, and we recommend only applying this coating between 50-90°F. - Rust-Oleum Product Support 2

A:  Thank you for reaching out! Our EpoxyShield Premium Clear Garage Floor Coating is recommended for interior concrete floors only. We currently do not offer a clear coating that is recommended for use directly over previously painted brick flooring. - Rust-Oleum Product Support 2

A:  Great question, Brian! Yes, a second coat of Rust-Oleum EpoxyShield Garage Floor Clear Coating can be applied. If more than 3 days have passed since the previous coat, the floor will need to be scuff sanded with 60/80 grit sandpaper on a pole sander to ensure full adhesion. Make sure the surface is clean, dry, and free of any dust prior to applying the clear. - Rust-Oleum Product Support 3

A:  We appreciate your interest, Brain. Rust-Oleum EpoxyShield Garage Floor Coatings are not intended for use on concrete countertops and are not considered food-safe coatings. - Rust-Oleum Product Support 3

A:  Great question, Robert! An unopened Rust-Oleum EpoxyShield Clear Garage Floor Coating Kit has a shelf life of 5 years. - Rust-Oleum Product Support 3