Customer Reviews for Advanced Drainage Systems 1 in. x 100 ft. IPS 100 PSI NSF Poly Pipe

This is 1.28" ID pipe. All the barbed fittings I bought for my irrigation project are 1.25" OD, making this already-installed (buried) pipe absolutely useless, unless somone can point me towards 1.38" barb to 1" male NPT. Thanks. :-/

Product work as described, I am using it connected to a 37 Gallon per min irrigation pump

The quality was good; the tubing appeared very durable. It was just too rigid for my needs, so I had to return it.

The product is great in quality, price and ease of installation. I highly recommend it.

Perfect fit better than the original.

Don’t know how else it could be stored, but it took Almost three weeks to straighten. Out the length I needed. It was a bit too stiff to use the screw clamps that were shown as being used with it. It worked but not my best choice.

Arrived very quick good experience although Home Depot’s website really needs a lot of work

As a building contractor I use the 3\4 poly as a protective conduit for running pex waterlines under concrete slabs. Each water source has a separate pex ran inside the poly pipe back to the manifold location. In the event a water line becomes defective, the pex can be pulled out of the poly and replaced with a new piece. This has worked for me ever since pex came out. Before that, I ran copper inside poly. Poly pipe is a great product, and very reasonably priced.

Order picker pulled 1-1/4 by accident and pickup desk attendant did not scan or verify (and neither did i) until i went to install next day…then it was too late. I had to use it at that point. I went to other local store with tag asking for refund of difference and they said they could not help - i had to go back to store i picked it up at - it was their problem. Not an easy online transaction like you would expect…

Hose works great for sprinkler system giving flexibility running lines

I used this 1 inch poly pipe for a garden project and it worked well. It’s strong and bendable to an arch shape. I was able to cut through it by first scoring and cutting with a pruner shear.

The pipe was crimped in several places and i was not able to use it.

Only needed about 120 feet and the tubing worked great

Pipe is flexible due to thin wall and is easily kinked. The roll I ordered already had a kink in it that was obvious while it was still in a roll. Luckily I didn't need the entire 100ft and the kink was beyond where I cut it.

You should have shorter lengths of hose available I just had to move a few heads and I had to buy 100 feet I use 20 feet of that now what do I do with the rest of it

worked like a champ on time and works fine

It's not bad, but the diameter is just slightly out of spec, it slipped on Blu-Lock under hammering pressure. I am going to use Blu-Lock poly from now on. In fairness the slip was under a water hammer condition, I stressed it a lot but compressing a full 1" flow at 60psi to a 30psi limiter on the far end of the 3/4 poly

met expectations,..roll too big for easy transport