Customer Reviews for Commercial Electric 4 ft. 4300 Lumens Integrated LED White Commercial Wraparound Light Multi-Volt Dimmable Captive Hinged Lens Row Mount

The Commercial electric 4300 Lumens 4 ft. LED Commercial Wrap Light is rated, 4300 lumens at 4000 K, can use a 10 volt dimmer, is a 120 - 277 volt unit with a 60,000 hour life span, using only 39 watts, and has a CRI of 85. On the box it says " assembled dimensions " which made it sound like it needs to be put together, how ever it comes fully assembled. The base of the light is made of metal, their is a full wrap around lens that is made from plastic, and the lens end caps are also made of plastic. It does have metal end caps under the plastic, it accepts conduit for both ends and in the mounting surface. one of the mounting methods it can use is , it has a round cover plate for a round junction box, 2 screws to screw the plate to the box and 2 toggle bolts to attach the fixture to the mounting surface. The light fixtures can be mounted end to end for a almost seamless length of lights, connecting the lights together with jumper wires for the power and dimming if desired. Their are no special connectors included or required to bolt them together as they use 1/2 "conduit or 7/8 " threaded couplers. Their are detailed instructions with pictures in multiple languages. It looks great and is vary bright, I plan on using it for a dark section of the basement.

This light is great, light weight, easy to install (like any other wired in fixture) and provides a lot of light without consuming lots of power. It comes with the hardware needed for installation on ceiling applications. The cover, somewhat difficult to snap into place after mounting the fixture gives the unit a nice high quality appearance. The unit is finished in white so blends nicely with the ceiling. Especially nice in garage locations because of the amount of light.

You can't go wrong with LED lighting. This 4 ft LED light is bright and since it is a wrap around style it lights from the sides and downward. I have installed this in our back basement where I needed more lighting and this works great. It is 4300 Lumens and it has 120-277 multi-volt compatibilities so you could connect with up to 10 fixtures without the need of a junction box. I may do that to create more lighting in our basement. It is dimmable but chose not to utilized that feature. Price point is on the high side. Very easy to install.

Bright, nicely styled, and a cinch to install. This light includes a 0-10 volt dimming circuit, which I did not wire in, but may do so in the future. It's designed for flush mount only, to be permanently wired against a recessed round ceiling box (box cover and toggle bolt drywall bolts are included). It's light weight and easily installed with one pair of hands. Energy consumption is unimpressive, drawing almost as much as two typical 4' fluorescent tubes. That said, it is a good bit brighter and of course avoids bulb replacement and jinky ballast performance later in life. The standout is the attractive hinged diffuser and end caps. They make an otherwise mundane utility light look sophisticated and soften the glare that typically make these cold color 4000k LEDs hard to look at. Finally, the light spread is excellent, pushing out the sides and distributing light evenly to the far reaches of the room.

A nice looking light fixture that gives plenty of light and uses only 39 Watts. This light fixture is much slimmer than those old bulky fluorescent fixtures that used multiple bulbs to achieve the same amount of light. This fixture has a 4300 Lumen output and uses half of the wattage to do this as compared to the older fixtures and has a life of 60,000 Hours. A really big plus is that the fixture weighs less than 9 pounds so it is very easy to handle during installation. My only complaint is that these fixtures cost so much less to manufacturer so why are they so expensive. If it was $20.00 less I would get 3 more of them.