Customer Reviews for Custom Building Products VersaBond 50 lb. Gray Fast-Setting Professional Thinset Mortar

I don't have anything to compare this product to except what I've seen on TV. This was my first tile job every, but everything went smoothly with this thin-set. I was actually very pleasantly surprised at how long it stayed pliable. After mixing one large batch to finish most of my bathroom project, I had to create a 2nd smaller batch over 2 hours later after having used up all of the first batch over the first 2 hours. I did not use the entire back in my first mix per the instructions, so that may have kept the mix usable longer. I used about 80% of the bag in 6 quarts in my first batch.

excellent product. works as designed.

This product works like its supposed too and ive been using it 20 years

This thin set is buy far the best out there I have used alot of different kinds of things set but this one by far surpasses them all it is all I use now

This product exceeds my every expectation. I shall recommend this product to everyone. This product was essential in my DIY project. I see more projects around the house in my near future. Which will make the Mrs happy. In return my life happier. A happy wife is a happy life.

Worked much better than the VersaBond Adhesive for the shower floor that was installed. Set-up quickly (in a dry warm area) and seems to hold very well.

I am using it as a metal lath scratch coat and bonding thinset for manufactured stone on the vertical exterior of my house. It meets the ASTM standards for exterior use. It has worked out very well, and once set, the stone has been impossible to pull off. In my mind, the price point is great compared to other modified thin sets, it gets the job done, has handled freeze-thaw in the few weeks it has been in place.

VersaBond is the only thin-set mortar I use when I have a choice in the matter. I vote VersaBond as Home Depot's single best product. I have been telling my clients, co-workers and friends this for many years. Try it, you'll like it.

Versabond thinset is a modified product. It works well, has a good working time, and good adhesion characteristics. I usually pick up different thinkers at the tile warehouse I deal with, but sometimes I don't feel like driving across town. I have used this material on numerous occasions and always with good results.

I use this stuff for every tile job. I've tried other products that was cheaper but you pay for what you get. Always a strong hold, sets fairly quick, and never have to worry about the quality. Redoing our Master bath and I'm using it for the floor as well as the walls. Great stuff.

Versabond is our go to product. As professional rehabbers we use it practically every time we do a tile project.

We build a waterfall /pond and we thought of applying the Rust-o-leum waterproofer. The product is easy to apply, worked well in sealing fine lines and reduced water evaporation. It has been almost a year and still worked great. I highly recommend the product.

works great for tiling, easy to use..no problems with clean up.

Easy to mix, quick to dry and great appearance. We will use this grout again.

What a difference all the products I purchased at Home Depot - my bathroom is impressive now!!

This thin-set mortar is a quality mortar and fairly easy to use. However, it does have a fairly short set time so you need to install your tile quickly. Also, I highly recommend that you remove all excess mortar from between your tile prior to it completely drying as it is much harder to remove once it has fully set. I use a painters knife to remove the excess mortar and quickly wipe the tile edges with a paper towel. This leaves a clean groove for installing your grout once the mortar has completely cured.

Product is easy to mix with heavy duty drill to obtain the desired consistency. I have tried other brands but Versabond is the best Provides great adhesion

I've used Versabond many times in my remodel projects. It's holds well for bathroom tile jobs. Make sure to let it set up well before grouting according to the instructions.

The thin-set worked beautifully for our front porch tile installation. We started with a very drab looking concrete porch and it's now beautifully tiled and very appealing. Added value to our home with ease!

Got the tile down. Only a couple of loose tiles. good not excellent

I live in Texas, all my tiles guys prefer Versabond. While in Charleston redoing home, the tile guys were using another product from Lowes...I picked up Versabond and told them , that is what everyone in DFW area, that has done work for me uses....well..they were amazed what a superior product it is...and everyone of them said they would never go back to the other product they were using....so guess you could say we were "pleased".

I used this to install a precast fireplace surround and hearth. It was easy to work with and adhered well to both Hardie backer and sheet rock.

This product worked well for our bathroom tile project. Be sure to mix it thick enough to have stiff peaks if you are doing walls.

It took me a while to figure out how much to mix per session but I got the hang of it. Very easy to use.

The Thin Set easily mixed with a power drill and we on and held the tile very well to oil based primed sheet rock. Very please with product.

The mortar was easy to mix, had a nice consistency and dried quickly.

I had a 1000 sq ft tile job to do and was dreading the cost of thin set at over $30 a bag. I read some reviews and decided to give the versa bond a try. It was easy to use and the results were great.

I use this thinset on almost every tile job I do. I used it in all the photos I've attached. It's my go-to for laying ceramic or porcelain tile.

We exclusively use versabond on all of our installations, it's easy to work with, easy to mix, sets great, and sticks!!!! We install split face granite tile and versabond is perfect for our granite tiles!!

I’ve used this thinset for years on different projects and have had very good success with it. It is easy to mix and spreads well when applying it. I use this thinset for both tile work as well as a jointer for hardie backer. Long term, this thinset holds up quite well and provides an excellent bond. Your tiles will feel stable and secure and won’t break loose over time. I’ve learned a few tricks on the best way to work with this stuff and I hope this helps you on your next tile project. Get the mix right. What you want is a consistency similar to peanut butter. I use a 5 gallon bucket to mix this in. I’ll pour however much mix into the bucket as I think I’ll need for the work I’m doing over the next hour or so. This is usually about ½ a bucket of thinset mix or less. Use your garden hose to add some water to the mix. Be careful not to add too much. Typically, you want just under 1/3 as much water. Use a paddle mixer and drill to get things going. Don’t spin the drill too fast either, just keep it slow and steady until the water is all mixed in and the thinset mix is nice and smooth. The consistency needs to be such that you can spread it easily on a surface and the troweled ridges will continue to stand up on their own. It still needs to be pliable enough though to maneuver the tile in place. While setting tile, if the thinset mix starts to dry out, you can always add just a bit more water and re-mix it to get it back to the right consistency. Don’t apply too much thinset at once. Remember that this stuff will start to dry out once you spread it, so don’t apply more that you can work in about 20 minutes. Twist the tile just ever so slightly when setting it. This will help to get the bond right. I also use a rubber mallet to tap the edges of the tile to ensure I get a good bond. You may also need the mallet to work on getting the corner heights to match up. Remember that setting tile isn’t just the square and making sure the grout lines are straight. You also have to make sure the tile lays flat and the set height is even with the surrounding tiles. I tend to use tile spacers to line up my spacing. Have a large putty knife handy as well as the trowel. I use a 4” putty knife probably more than the notched trowel itself. This is handy for cleaning up tile edges, “buttering” the backs of tiles (when you get into those corners) and scraping up unused thinset off the floor. A hammer and cold chisel works well for getting up dried thinset off the floor. Sometimes at the end of a long day, you may forget to clean an area of thinset off the floor at the edge of a tile you just laid. This will dry and in the morning you’ll have to get it up before you can lay more tile there. Not to worry, just take a hammer and cold chisel to it and it will come right up.