Customer Reviews for DIABLO 10in. x 50-Teeth Steel Demon Cermet II Saw Blade for Medium Metal

This blade I've noticed cuts a bit more quiet than other brands I've used. The mitered ends are smooth and most of the time leave a few if any burrs. I use this blade in my evolution chop saw. Much better of a blade over the old asphalt blades. Buy this!! You won't be disappointed

Great blade diablo is great products first blade lost some teeth while cutting after a month of cutting steel diablo Warrantied and replaced that why I by diablo company stands behind their product's!

I bought this July 2 2020. Have done tons of cuts with this blade! The went to cut a piece of 11g square tubing a got some kick back looked and lost three teeth! But made some more cuts after that and blade cut smooth even after losing 3 teeth! Must have been a defect!

better than an abrasive blade

I used this on mild steel tubing and parts cut very clean with almost no burrs , very good blade for the price.

Looks like a nice blade but I will never know as the description when I ordered it says it has a 5/8" arbor but when received it has a 1" arbor. Wasted a trip to pick it up and another trip to return it. I guess I'll have to order the Milwaukee blade that is listed as having a 1" arbor but when you read the photos actually has a 5/8" marked on the blade....

Works good for cold cutting metals.I use it on my Evaluation saw.

I have used this blade in the past. It is a heavier built blade. I have it on my Evolution saw Icall it my everything saw. I cut 1" solid sq stock,steel,wood,plastic,copper,alumiumn. It cuts all of them very well.

Cuts 1” galvanized pipe like butter.

Vendor please update you reviews to reflect this blade only. Not wood blades, not concrete etc.

Great blade, cuts through steel like butter, though it was tubing. Haven't tried anything solid yet. The 1" arbor size was a surprise; expected 5/8" like all my other 10" blades so had to buy an adapter.

I have had a lot of luck with diablo blades. They cut like a knife thru butter. I had to modify my saw to slow the machine down for this blade. Awesome service.

After cutting thin wall steel tubing with the Evo fry cut saw several teeth are missing. I’m going to return it and see if I can get a refund

The Diablo steel demon cermet ll carbide blade cut through 1 1/2" galvanized pipe quickly and cleanly. No over heating or tarnishing the metal.

Purchased this product november 2020 to cut 2" pipe. Carbide teeth failed in 2-3 minutes with less than 1/4" inch deep cut. Finished cut with Diablo AMPed carbide tipped recip blade but could not achieve the smooth cut which the 10' cermet blade was purchased. This blade must be defective as a standard circular saw carbide blade will cut this pipe. Would be nice if Diblo rep would contact me to discuss.

I have cut 1/8 thick angle, 1/8 thick 1x1 square tubing and 3/16 steel plate. made at least 30 to 40 cuts. Just go very slow and dont force it. seems to work good. If you are using this blade on a regular miter saw at 3400 RPM it's going to dull the blade very quickly. you need to use these metal cutting blade on a slow RPM saw, around 1800 RPM Max.

This blade easily cut through the 1-1/4" angles I had. Much quicker and cleaner than the grinder wheel.

Does not fit 10 inch more saw without bushing, so as of right not. Not able to use it.

Cuts clean and smooth.

I had a lot of wood to cut with nails in it. The nails was no-problem but this blade would not go through the wood.it heated up fast.

Works as advertised

Did not get the right oneIt needed to be 5/8 diameter bore size .But overall was good service

Rating provided by a verified purchaser

these are fantastic blades but beware that the arbor size is 1", not 5/8" like almost all other 10" blades i ordered these for a customer to cut insulated foam panels that have 26g steel on the outside using a 10" circular saw just had to get 5/8 to 1 bushings to make it work