Customer Reviews for Everbilt 1/2 in. x 96 in. Aluminum Angle Bar with 1/20 in. Thick

Used the Everbilt Alum Angle to repair the support members on my 8' step ladder. Perhaps not quite as stout as the OEM pieces, but still strong enough to return the ladder to use.

Stopped Tree Rat Damage

I purchased this to create a wind guard for my flat top griddle. Perfect fit. Easy to work with.

Sturdy yet easy to cut through with my Dremel metal cutting wheel. I recently rebuilt the ramp on my enclosed trailer door and used this to frame around the Diamond plate that is laid over the new plywood. I added some clear caulk to prevent water from seeping through and rotting the wood( reason for replacing) This is light weight yet heavy duty and much thicker than what was previously used. Easy to drill some pilot holes through as well. Happy with purchase and would recommend!

Use for Corners on cases I built for my DJ company. Easy to cut, used 3/4” metal tap screws drilled in with my cordless drill to attach to the corners. Works well Looks good!

Bought this angle to use as a support for shelves to have a thin profile in our closet and not have to use hangers that took up more room. The angle at that thickness is actually extremely strong and not as flexible as I thought it would be. It will easily hold up a 12x12 shelf in our closet corner. The angle is also very easy to cut and screw thru because its aluminum and softer than steel but because of that it does scratch a little bit more easily, not a problem for my condition thought.

Worked very well for our project!!

I used it as a frame for slatwall in the garage

We used this as a facing for a built in shelf in the kitchen for spices. It looks great, and created the look I was going for.

The aluminum angles worked well for my purpise

This is being used as trim in a Man Cave. It looks great. A bit soft to cut.

Easy to assemble

Made two rails for a greenhouse shade curtain with stainless steel wire and turn buckles. Strong durable and looks great! Pricy but you get what you pay for in looks and strength!

Very easy to work with.

Easy to cut with hack saw. looks nice.

Worked great for my purpose. Cuts, drills, and polishes easily. Used it as legs for planters I built for my wife

I used this to make my own custom door tracking. It worked out beautifully.

These pieces of aluminum are really great for fixing random projects. I was able to fix up my canopy quite a bit, and it's a big deal for me since that's my money-maker. Since this is a clean piece, you have the option of using a torch and alumiweld or simply riveting like I did. There are a few videos on YouTube of how to use this product in connection to these pieces, which also come flat and even in square tubing I believe. This piece is a very affordable option for strengthening whatever project you're working on. I was able to add years of service life to my canopy which was all in pieces; wish I had bought this earlier BEFORE it all broke apart.

I used the Aluminum Thick Angle 3/4 in. x 96. x 0.050 in. on a custom horse barn doors for trim out WOW!

I got the 3/4 IN. X 96 IN. ALUMINUM ANGLE WITH 1/8 IN. THICK for a small project. The angle is true to the stated dimensions and fully within the normal tolerance. While the aluminum angle is easy to cut and drill, it is still strong. The label doesn't state the exact material, but given how easy it is to work with, I assume it's 5052 aluminum. Overall very happy with this aluminum angle.

I got this to put on the corner of a plaster wall that always gets hit & chipped. I plan to paint it with Rust-oleum primer and then paint it with the latex wall color. In the past I've used this same angle AL for reinforcing shelves in my shop. These keep the plywood edges from breaking apart as well as adding a lot to strength to the shelf so it doesn't bend under a heavy load. It drills and cuts with ease. It came in a nice shipping tube and the item got to me safe & sound. There were areas of black on the metal, but as I said I'm painting it, but it you're not, you may have to polish it a bit with metal polish.

I received my 3/4 in. x 96 in. Aluminum Angle with 1/8 in. Thickness. It came in a long sturdy cardboard tube & didn't have any damage. The finish is smooth & it looks good. There are so many uses for this long piece of aluminum angle. It is pretty easy to cut to any length. Also it is pretty easy to drill holes in the angle. Being 1/8" thick it is very strong. It will be handy to have this angle when working on projects or repairing things around the garage or house. Everbilt makes good quality products.

Great product to enhance a finished work.

Hey it's angle aluminum good for fabricating things. I used it to reinforce the gate on my aluminum trailer. Cuts easily with a carbide saw blade on my table saw. Very light compared to angle iron but not as strong. NO rust or painting required either. Good stuff.

Perfectly straight. Easy to cut with hacksaw and miter box. Light weight

Works great to replace middle part of door jam.

Being aluminum it was a bit pricey, but it was light-weight and rigid which was perfect for the intended project.

The aluminum angle bar was easy to cut to length, drill, and shape to fit the area I needed. At the same time it is resistant to bending or warping under a load, staying straight with a reasonable weight resting upon it for long periods. I failed to inspect the aluminum adequately before purchase, as I did not notice the gouges and marks in the otherwise flat surface. This required me to perform a lot of extra sanding to eliminate and reduce the imperfections prior to priming and painting.