Customer Reviews for Everbilt 3/8 in. x 10 ft. Soft Copper Refrigeration Coil Tubing

I use this on my Airstream Bambi to replace the refrigerator gas line. This was an exact replacement for the existing vintage copper gas line I used a flaring tool and the existing connectors I had to replace one or two connectors but Home Depot had them both.

I used this copper tube to make a new coil for my induction furnace. It worked perfectly.

This is as advertised and should be used in refrigeration, or gas connections (especially outdoors which is why I was buying it for). Soft (or ductile, or in the trades #2 copper) tubing can be bent easily to travel around obstacles. While the work hardening of the drawing process used to size the tubing makes the copper hard or rigid, it is carefully annealed to make it soft again; it is therefore more expensive to produce than non-annealed, rigid copper tubing. Being soft, it makes the greatest and safest connection of them all - flare fittings. Flare fittings are wonderful for high pressure as well. Remember, always unroll it straight to use it, don't pull off the coil making it into a giant spring shape - the more you bend it, the stiffer it will get. Strangely HD sells 3/8" and 1/2" but no 5/8" even though they sell 5/8" fittings.

Good quality copper. Good for ice makers

Not sure if you can go wrong with this type of product... Nonetheless it's exactly as described and just what I needed for the hot water line when installing a humidifier into an hvac system.

The shipping took way too much time and the customer service won't able to do anything to help.

This product well for my application on an air compressor feed line. Flexible enough to properly shape, but ridged enough to have good strength. Overall worked well!

This was the least expensive copper I could find for a science experiment.

Rating provided by a verified purchaser

Was able to easily cut the tubing and install flare fittings for my installation.

I used it for art purposes (to turn an old mannequin into an amazingly cool shelf thing), so yes, it worked perfectly. Very shiny, very bendy, very easy to add patina. If you’re planning to use it for gas or water or whatever, I have no advice. If you’re going to get artsy with it, 5 stars.

Easy to work with and got the job done quickly.

It was 10 feet of 1/4" copper tubing, not much more to say about it.

Rating provided by a verified purchaser

High Quality, Easy to Work with

I made a swl (short wave antenna) from it. Thanks for the pick up service and the friendly service.

The copper tubing was perfect. I am making a portable water desalination kit so I can always have fresh water to drink if I am camping at the ocean side and there is no other water source. The copper tubing is perfect for my needs.

I made a copper rose and it is perfect for the stem

Rating provided by a verified purchaser

Just what we needed to replaced the bent and broken copper pipe for our vintage trailer propane system. Bent quite easily without kinking (which is a great thing). Ordered online and picked up in the “pick-up lockers” at front of store with the code they sent me. Very easy!

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Good quality. Easy to cut

Pipe worked great

It worked just as I expected. A OK.

Used as conduit for garage hoot wiring

Easy to use and unroll

very clean copper