Customer Reviews for Home Decorators Collection Sedgewood 24.5 in. W x 18.75 in. D x 34.375 in. H Single Sink Bath Vanity in White with Arctic Solid Surface Top

This is a very decent, universal-type, smaller bathroom vanity (24 1/2”) with top. The vanity base has some plywood construction, but is mostly particle board with veneer covering. Not a problem so much on the outside, but the inside surfaces can damage easily from moisture. The door and drawers are easily reversible, and came pre-installed with the drawers on the right. Door alignment was pretty close to even, and hinges are adjustable for fine-tuning. The vanity top is of the integrated sink design (not undermount), so all one piece. Drilled for 4” center set faucet. The Arctic White color with light speckling will go with just about any decor. The drain hole is cut very precisely, smooth. They should have included a backsplash, but I suppose it's a design thing. Still, should have included one. I did notice the top was slightly warped, which is fairly common on a lot of tops, so I’ll be contacting the manufacturer. The drawers are deep, all the way to the back wall, which could create problems for your plumbing. The center of the back wall is clear, and there's a gap between the drawers available for water inlets, so do your measurements. This an attractive little unit for the money; mine shows good attention to detail, quality-wise.

Sedgewood 30-1/2 in. Bath Vanity in White with Solid Surface Technology Vanity Top in Arctic White Sink by Home Decorators Collection. My lovely bride decided our maple early colonial vanity that’s adorned our bath for the last decade didn’t match the fresh shades of Glidden paint’s “silk star” walls with “clear moon” trim adorning our bathroom, and when she saw Home Decorators “Sedgewood” Vanity in Artic with the white sink it was a perfect match for her new color pallet and the new Shaker cabinet doors. The Sedgewood Collection comes in several sizes, and the 30-1/2” vanity was the perfect fit. This is a clever vanity that allows you to easily switch the drawers and door to the opposite sides to suit your bathroom using only a Philips screwdriver. Once you decide how you want it, you attach the drawer pulls using the predrilled holes and the included pulls. There is a how-to video on Home Depot’s website showing how easy switching the hand of the vanity is. As the door only has a small pilot hole marking where to drill the hole for the door pull, you will need a 5/32 drill bit and a drill to install it. The door has a “soft close” feature that keeps the door from slamming closed. We topped the vanity with Kohler’s Capliano Monoblock Oil rubbed bronze faucet, which is a nice contrast against the white solid surface counter top. Our local plumbing code requires the A/C condensate drain be plumbed to the sanitary sewer, and while at Home Depot I discovered a continual flow p-trap in schedule 40- ½” and ¾” pvc pipe which greatly simplifies installing the condensate drain. I opted for the ¾” size and routed it to a 1 ½” drain with a 5/8” dishwasher drain connection, using a 1-1/2” x 1-1/2” union, with a 1-1/2” to 1-1/4” seal in the top side to mate with the Kohler pop up drain. My wife loves it, and when Mama’s happy, everybody’s happy.

The solid surface sink top looks great and is easy to clean. The vanity itself can be installed with door left or right, you will need to drill the hole for the door knob and screwdriver to move it if needed. The construction of the cabinet is some plywood -some particle board with MDF doors , the white finish feels like a a vinyl coating and makes for easy cleaning. I had the cabinet shipped to me and it arrived nicely without damage- I am not usually to fond of particle board but I do have to say the frame seems to be strong and well constructed. The overall look of the cabinet is great. It provides plenty of storage space. And I love the clean look of the solid top and sink and the ease of cleaning. But there were a few things I didn't like: my issues were mostly in the construction of the drawers. Although the drawers are solid wood , with stapled corners and standard drawer glides- I don't like the quality of the drawer glides at all - it seems like they don't glide smoothly and there's alot of play in the drawer left to right. The metal glide came pre- installed with rivets on to the drawer but it is very loose and has large gaps between metal glide and wood. Where the drawer hanger attaches to the rear of the cabinet has movement - maybe it is suppose to so that it can self adjust but it gives it gives the drawer a very wobbly feel. Also the pre-drilled hole on the drawer front for the knob was not cleaned well and had a piece of vinyl starting to rip off , luckily I was able to cover with the knob. I think i would still recommend the vanity but I wish they used better drawer hardware.

This looks to be a standard-quality item. The ensemble (the cabinet and the vanity top) came well-packaged, which was a good thing, because it looked to have had a pretty hard journey to my place. The exterior cardboard was torn, punctured, and stained, and with all four corners rounded off. But the cabinet and sink were undamaged. The two-door, two-drawer cabinet has a nice design feature - the cabinet is pre-drilled such that drawers can be positioned on either the right or left side of the cabinet. The vanity top does not have a backsplash, which may or may not be ideal for a given customer.

We have looked the sink and top over. Very disappointed in the top. It is very uneven especially in the front on the lower edge. Looks like poor casting. We ordered a 24" and a 32". Both tops have this same problem. We will check with Home Depot to see what can be done.

The vanity comes completely assembled in solid white. The pretty white bowl sink and vanity top artic surface is in one piece and included in this pack. It measures 36.5" in width, 18.75" in depth and 34.37" in height measuring including the vanity top. Three screws, three brushed nickel cabinet knobs, four glide foots and four clear round bumpers are included. The interior has a great looking maple finish real wood feature. I really like the fact that the cabinet door and two drawers are interchangeable between the left or right of the vanity to your liking. I had to cut into the rear panel in order to have the plumbing insert into the vanity. Taken me under an hour to have it completely installed. It only holds an 8" widespread 3 hole spacing faucet. We love the spacious drawers, vanity top and large space behind the cabinet door. This vanity top sink and bathroom vanity fits perfect in our smaller restroom. We plan to purchase the backsplash at a later date. We're happy with the size, the color of the vanity and top vanity. It hosts our children on a daily basis. We love it!

The home decorations bath vanity meets my needs. Looks great and adds storage. It was fairly easy to install. One thing I did have to fix is the bottom drawer faceplate was not assembled correct. The brad nails missed going into the faceplate on one side, which made it stick out from the cabinet. Easy fix, but maybe should have been caught on quality check? This also made that drawer too thick for included hardware before I tightened it up with some short screws. Only other thing needed to complete the install was a scrap piece of wood and clamps to drill the hole the rest of the way for the hinged door handle. I'm still not sure why the drawers we're finished and door was not. Instructions told me I would need to do this, but seemed a bit odd to have a small piolit hole and not to be all ready to go. I would buy another vanity from this product line in future if need to remodel another bathroom. One last cool feature I didn't use. But you can swap door and drawer sides if needed

I would recommend but with the following comments when I was installing it. I am a DIYer, and this product has some shortfalls. 1) From the price point, realize you are not getting solid wood. It uses MDF board strips in the back to hold the Pegboard backing panel. It uses some plywood for the front side of the cabinet. And it has particleboard side panels. See my pics. 2) I needed to switch the location of the drawers to be on the left and the door on the right. This did not turn out as easy as it says. For one, the pre-drilled hole for the door bracket on the right side bottom, was in the wrong location!!! See my pic. So I had to drill my own pilot hole for the lower bracket of the door. This is a big mistake on manufacturing. I even went to look at the display model at my local Home Depot, yes, same mistake on their display model too. How many homeowners are going to have a drill and bit to fix this mistake unless you are a DIYer. 3) If you follow the instructions for installing the handle on the door to drill the hole for the screw. It reads to use a 5/16" bit. That is a major mistake which would result in a too big hole!!!. It should of said use a 5/32" bit. See my pic of the instructions, he screw, the correct 5/32" bit, next to a 5/16" bit. See the mistake!!! 4) Even when I switch out the drawers too, there was problems. I needed the drawers to be on the left and the door on the right. The cabinet frame itself uses recessed holes to screw the overall frame together. Well, when I installed the drawer onto the left side of the frame, the predriled hole with the small plastic plug on the bottom right had problems with tightening the moved drawer track. See my pic. What was happening was it has a small white plastic plug and a really small screw because as you can see in my pic, it was right where that recessed hole is. So when trying to tighten the screw, it would spin the plastic plug and never tighten. So I needed instead to find and use a 1 1/2" tapping screw there instead so that the screw thread can bridge across that gap in my pic and screw grip into the wood. What a pain to have to find a solution for a poor design here. 5) BTW there are no screws or anchors(plastic plug and or Toggle bolt) provided if you wanted to screw the cabinet to the wall. 6) BTW there is no silicone caulk, you will also have to provide inorder to install the sink top to the cabinet. 7) Because it says you can switch the location of the drawers and the door, you will find that the door does not have a fully drilled out hole for the knob. It tells you in the instruction to clamp on a piece of wood before you drill the hole. This is because if you don't do this, you will tear damage the vinyl coating of the door. How many homeowners have clamps or a piece of wood lying around to do this, unless you are a DIYer. 8) Looks okay from the front, but if you look at the cabinet from the side, you can see the big gap of the closed door from the side. This is due to the type of cabinet hinge used. Doesn't look that great from the side. See pic. Even on the drawer side you can see from the side view that its not really flat even too. 9) At least the door has soft close feature. But nothing on the drawers to auto close. 10) BTW the sink does not have an overflow hole that is typical on many sinks. This sink doesn't have one which I thought was strange. So you may encounter slower drainage because of this. Overall, its an okay cabinet, but I think they should have used better materials and more quality control for the problems I encountered and noted.

Perfect Size and Style! Recommended for a smaller bathroom but I chose to swap out my old laundry sink and what a great decision, the difference in appearance in a simple update I could not be more pleased Home Collectors Sedgewood gives you the option to alternate the doors and the drawers depending on which side you would prefer, mine was delivered as pictured below. The sink cabinet comes in 2 pieces weighing 138 pounds, predrilled holes for both drawers for placement of the beautiful rectangular nickel knobs. I have not yet become comfortable enough to drill a hole in the door for the 3rd knob however instruction manual provides very helpful guidance This model does not include faucet, drain, plumbing or any water lines, I chose Home Depot's recommendation and could not be more pleased with the results

So, the packaging was really good, which is important because this is just a basic board vanity, nothing super sturdy. That being said, they are all that way, so it is neither good nor bad. The vanity top is pretty nice. I haven't finished fully installing it yet, but it no different than any other to install. Mine came shipped backwards from the photo, the drawers are on the right hand side. I am remodeling and installed a new bathroom in my basement, so it doesn't make much difference to me, but it could for someone else. I don't believe it is something you can change. I'd just avoid ordering online if you need the drawers on the left, to be safe!

This is great. Arrived very well packaged, completely intact. It was very easy to put in place. Complete instructions and additional hardware. We opted for knobs that matched the chosen faucet. For us, the line connections feed from the bottom, not the back, but still very easy to measure and cut. Complete instructions too for swapping the door and drawers to different side which was needed. Took only a few moments to do that. From delivery to install it took less than one afternoon to remove the old and install the new. Any it looks great. Very solid and the sink is heavy, very nice design too.

The Sedgewood 48 1/2" bath vanity comes in a clean looking bright white finish and is a freestanding unit. It has a solid surface vanity top in arctic with a white finish sink. A back-splash can be added to the finished unit using tile as I did in a white subway tile or any other desired color or even a peal and stick. The top is pre-drilled to use an 8" widespread faucet. The hardware for the drawers and the doors have a nickel finish. The most unique feature of the vanity is that you can change the configuration of the unit from the drawers on the right to the left and the doors on the left to the right using the pre-drilled holes for the screws and the door slides using only a Phillip's screwdriver in a matter of minutes. This is a nice large cabinet to keep cleaning supplies and other items. The drawers sides are made of real wood, slide easily and are nice to keep medicines and other items. The back is solid to keep items from falling out. Cutouts are needed to run the plumbing lines. I have the 36" very similar unit since March 2017 on the first floor and the unit works fine and is like new. The fop of the vanity and the sink are identical. My home went thru the eye of hurricane Irma and the vanity was flooded by the surge and later a water line cracked and sprayed right on the vanity at night for 8 hours till it was discovered in the morning. The vanity came out virtually unscathed because it was made mostly of real wood. This newer model is made of a lot of particle board. I do not believe it would have withstood the flooding. I am placing this unit in the upstairs bathroom for that reason where it would not be subjected to excessive moisture.

This is one beautiful vanity and my wife loves it,there is plenty of room for me to add a shelf under the sink so he has some decent storage.I really love that light gray color and definitely love the 2 extra drawers,I never told her i was getting this so it was a suprise and she had the biggest smile on her face when they delivered it yesterday.Thank You .

The bathroom vanity came well packaged and easy to install. It looks great and very modern. No complaints on how it looks at all! The screws that came to install the handles were too short for the drawers though, and there was no hole for the handle on the cabinet door. The counterop sink is also very nice and easy to clean! Overall, the product looks amazing, but had some small quirks to fully install.

Great looking vanity and top. Cabinet is well made and the finish I really like. It’s so easy to wipe clean. Soft close cabinet door hinges and drawer glides. All operate nicely and smooth. Vanity top is one solid unit so easy to attach your choice of faucet and adhere to cabinet. Back splash pieces are not included. I would think you can order matching backsplash but tile works just as well. Solid cabinet installation was fairly simple and yes the drawers and cabinet door can be swapped if needed for your particular install.

This Sedgewood 48-1/2 in. W Bath Vanity in Dove Gray with Solid Surface Technology Vanity Top in Arctic with White Sink is a nice item.. The raised panel doors, brushed-nickel hardware and paint finish give the vanity a stylish yet traditional appearance. The included Vanity top in Arctic White with integral White Sink Bowl is a nice bonus The vanity has features that many will find useful and attractive. The two drawers are quite deep and the cabinet doors are wide with soft-closing hinges; silicone bumper pre-installed ( extras' provided ). Accessory side or back splash pieces can be purchased separately. The vanity is well protected for shipment and arrived on a pallet and was undamaged. As she did not care for the look, I did not use the bundled vanity top. I would have preferred three(3) shallow drawers and an adjustable intermediate shelf behind the doors for improved storage options. The nickel hardware arrived with small ( noticeable up close) nicks, pits ( probably from the manufacturing or packing process) Vanity appears to be constructed of thin veneers over particle board. Corners are fastened with staples. Front is fastened with pocket screws. I noticed a concerning split in the top of the front from a pocket-screw, apparently ignored during assembly. The front doors were not aligned properly. Hopefully I can adjust that mis-alignment by small trim-adjustments at hinges. Although it is nice, this vanity would not be our first choice.

We wanted something with storage for a small bath remodel this vanity is one of the best we can find. The back had to be cut for the drains to fit and one drawer had to be adjusted bc it didn't close completely. Overall it worked out and looks nice.

I didn't realize how much cheap wood the frame was made of. It will probably not last long and is just not good material to use in a bathroom. Countertop looks awesome, though.

The enamel from the sink is already craking. I recently bought it and had it installed before I noticed the crack sonce is small now but I guess it will become bigger with the time. Not a good product.

Installed last week, purchased about a month ago. I came totally assembled in the box. Was not available at my store only some stores carry this product. Drawers work nice it looks great and well put together. Installation was easy, the only surprise we saw that the sink didn't have the accidental overflow option, we didn't like that but we used it since our kids are out of the house, we need to be careful. The other option was to purchase and additional sink with the overflow option(expensive) and we choose to use the one that came with it. We tried to order the matching side and rear splash kit but it was out of stock, We used a white door threashold made from man made material, modified it and used it, it looks gtreat at a much lower cost(see picture) It all looks great and we like it.

Great look and mechanics

Looks Great. I’m not the most handy but was very easy to install. Great quality for the price. Highly recommend.

Everything looks pretty good, I like how the back wall is cardboard instead of wood, making it easier to cut for the supply lines. Why not 4 stars: Once all the holes were cut and drilled, mounted to the wall, I came across a problem putting the hardware in: I have three of the same length screw. Unfortunately, the drawer screws need to be 3/8" longer due to the thickness of the interior part of the drawer. This points to a quality control problem that exists at the factory, as some of the other reviewers have pointed out. Details matter.

It fit into my small bathroom perfectly. I changed the handles and added backsplash to match the style of the shower. Overall no complaints. Drawers are fine.

The vanity was perfect for a smaller bathroom. We love it!

I have been looking for a vanity with drawers on the left side and this was perfect. It also makenour new bathroom pop.

Love the look of the vanity. Looks great in our remodeled bathroom. Like others mentioned the drawers are cheap. They are a bit of a pain to open and close. We looked at a TON of vanities and for the price point that's the quality you get.

Fit my ne bathroom beautiful

It changed the ugly look of my bathroom, rooming and beautiful.

Looks great in our new bathroom