Customer Reviews for IDEAL Cat6 Feed-Thru Modular Plug (50-Pack)

I tried the feed thru cable ends and enjoyed the ease it is to make new connection ends.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Works nicely takes guess work out and you can see the wire layout

Rating provided by a verified purchaser

It works really good on industrial use cat6

Rating provided by a verified purchaser

Unless you install network cables for living, keeping the proper color combination when inserting them in the plug is a very tough job. These feed-through plugs allows you see if the combination is correct before crimping.

These were easy to use. But make sure to get the correct crimper for these. I will always have these in stock.

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Rating provided by a verified purchaser

Plugs work great. Only issue is the holes are a tiny bit to small for the cat6 cable. I had to strip the wires just a tiny bit to start them with bare copper. Then I pulled them through with needle nose pliers. Make sure you get the correct crimpers or you will be frustrated trying to trim the wires after.

they work great and makes it easy to check wiring before you crimp

don't care for the pull through

Rating provided by a verified purchaser

These are not the cat6 pass through connectors I came in for. The store was out of the "Kliens" i wanted. I had to individually thread each wire in these connectors making the job more difficult. After crimping the connector, the connectors will not snap and lock into any recepticle I tried them in. Not worth the price i paid for them.

Very nice fit and crimps well

Purchased these because the Cat6 cable I purchased (from another retailer) turned out to be stranded, and the Cat6 8P8C ends I already had were only good for solid. After termination with these, my devices linked right up at 1Gbps as expected. It was somewhat difficult to get the wires to feed into position, but once everything was in place, they crimped just fine with the tool I already own.

Quick and easy. No more makeing sure your strands are the same length. Saves me countless hoies

Rating provided by a verified purchaser

Rating provided by a verified purchaser

These are really sweet! 12 ends, 12 successful installations. I used an AllenTel Products crimp tool not specifically designed for feed-through plugs and used the built-in knife edge wire cutter to carefully trim the wire ends. I found that using the knife edge cutter produced a cleaner plug end. Using these feed-thru plugs cut cable termination time to less than half with better, cleaner results and good, consistent jacket capture.

Good quality product and have had no issues out of them. I like the push through better because it allows me to confirm wires didn't shift while being inserted into the plug. Would buy again.

Easiest way ever to terminate

Easy to use and check your wire sequence. No redo's!