Customer Reviews for Liberty 3-1/2 in. Polished Brass Heavy Duty Coat Hook

We used each of these hooks for our kid's backpacks which are only around 5lbs each. Our 4yo tripped and tripped and leaned on his backpack which was on the hook. Mind you this was not all of his weight...and the hook snapped. For something touted as 'heavy duty', it snapped like a pencil. Home Depot replaced the package free of charge so I can't complain about the customer service, but I wish the characteristic 'heavy duty' stood up to its name.

I have a row of coat hooks on my wall on a rack I made. These were the hooks I used. These are cast zinc(?) with a nickel finish. They are very weak and I bought these to replace broken ones I originally used. There is opportunity on the back of the hook to add two reinforcement ribs that would solve this issue and would cost them nothing. This is an obvious design flaw and leads me to believe that many of there products are similarly flawed as the design team is the same. I filled the backside of the replacement hooks with JB weld. I hope that will correct the flaw.

These hooks were perfect for my DIY project

I’m very happy with these hooks. After removing a pair of mismatched wood peg coat racks during an entryway paint job, I realized just how bad it would look if I put them back up. I found these hooks at HD at a reasonable price. The included matching screws are plenty long enough to attach through ½” drywall and have ample purchase into the stud. Since I made racks out of nominal 1” pine, I had to use a shorter screw. I like the look of these and they are quite sturdy.

Wonderful product!

Very nice hooks for the bedroom, bathroom or entryway. They are sturdy and the screws are quality. A little pricey though and I wish they came in a four pack. I used these recently to make a hanging rack for my daughter's room. I mounted 4 on a 20" board I routed/painted and hung it on her wall. I spaced the hooks 4-1/16" apart. The screws are 1-3/8" long so I cut them down to 3/4" with a hand bolt cutter so they would not protrude from the back of the board. I then mounted it to the wall with 1-1/2" screws and drywall anchors. The screw holes for each hook are 1/2" apart. Very pleased with the hooks overall.

It's beautiful and sturdy unlike the wooden pegs that now hold lightweight items like scarves.

Very strong was able to hang multiple bags and coats on hooks

These are really attractive and well made coat hooks. The satin finish is very nice and the 2-screw mounting is very strong. Nice matching mounting screws are included. We had a blank wall in a walk-in closet so I mounted a 1 x 4 to the wall and attached 5 of these hooks to it so now we can hang several items on the wall.

The 3" satin nickel hooks were just what I expected. I am very satisfied with the product.

I wanted to post a pic for everyone to see what the color actually looks like. I'm happy to say is matches the rest of my antique brass perfectly. I love it!!

Nice looking hardware that is heavy duty, but not big and bulky. Comes with 2 mounting screws that are a nice 1 3/8" long, which was perfect for the hook board that I made. Able to mount them very securely. Very satisfied with purchase and my project.

I bought a pair of these hooks to hang towels and bathrobes on in our two bathrooms. After two years, they have held up well to constant use and wet environment. The finish is still intact and there is no sign of rust showing. The screws are monstrously long and since I had decided to screw them into a stud, I went ahead and pre-drilled the holes. This made installing the screws much easier. Even with pre-drilling, the screw heads are fairly weak metal which means you will need to get a bit that fits the screw head perfectly, use plenty of pressure and go slow if you are using a power-drill. Overall, the hooks have been a good purchase as they are stylish, have held up to the bathroom environment and were fairly inexpensive.

The coat hooks nicely complimented the coat rack I built for the hall.

Got these for my office, the black matte finish works well with the handles on my desk. They were easy to get on the wall. Holds a ton of weight, even without being in a stud. My co-workers and clients keep complimenting them.

Half the screws broke on the two hooks I tried mounting. Heads twisted completely off while trying to tighten the hooks down.

The product work fine and looked good

It’s a brass hook. Hangs costs up great

We used 1-1/2” anchor screws. Now they’ll hold 30 lbs

Matched my existing hooks perfectly.

Very nice quality and finish for coat hooks. The only disappointment was I had to order them online since they are no longer available in my local store.

Excellent for my basement use!

Everything was there

They really dress up our new cubby.