Customer Reviews for Loctite PL Premium 4 oz. Polyurethane Construction Adhesive Tan Tube (6 pack)

This was exact what I needed to cover one wall with MSI Ledger Stone, also purchased from Home Depot.

Needed a material to seal some screws in a metal roof. Looks like this stuff is UV resistant and I was surprised that it cures quite hard. I was worried that this might not have been the best choice but after inspecting the bonds 24 hrs. later the hard cure created really good seals at the bondline. My one complaint is that the can didn't have basic labels I really needed: temperature ranges (for seasons), UV resistance, etc. Also, a way to clean up and a lid for unused material would be nice.

Day 1: Tube cap unsealed as product flowed without issue. Cap resealed as directed. Day 2: Unsealed cap yet gel would not dispense. Unclogged with a metal stake point. Substance flowed yet viscous. Flow stopped yet as I struggled to dispense, tube erupted and glue squirted, making a huge sticky mess on my fiberglass project. Highly UNrecommended.

Saw a video on deck building & PLP in joints of deck boards as waterproofing. Hubby & I just put in all new floor boards. After big rains, we power washed before we get our house painted. Redwood was all rotted. We took rotted boards out & got new redwood. It took 3 days. The pic shows the deck & joints. We taped the boards & squeezed the PLP inside & pushed the boards together (tape kept boards clean). Hoping this waterproofing tip will keep it from rotting. We do lots of DIY projects together.

Easy to use for the very small project I had.

In 2020 I used this product to place solar deck lights on my driveway. I wanted to change the direction of the lights, plus two had stop working. The adhesive hold was so strong I broke a couple of finger nail (it's ok). I had a time plying the lights free, but that only proved the strength of the product. It did what it said it would do. 2 years strong had I not made the changes I did.

Seemed to work great. Product said it could be applied to wet surfaces but I made sure to use it when temp higher than 40°F. Week later, I had to move one a couple of inches—was prepared to have to use a putty knife, but the rubber stair tread came up without EFFORT! Further, the "adhesive" came up as a strip all separate!

This is the only adhesive that we use for building exterior hardscape projects

Strong bond, easy to use (doesn't give a workout using in caulk gun), bonds quickly with time to adjust.

Used this to affix granite plates to a monument at a Veterans Cemetery. Worked better than expected, but as advertised. Plates were placed on a vertical service.

Works & sets well. We used to set baluster railings on balconies.

Perfect for Fypon installations

Great Adhesion and Easy Application. I’ve used these a few times and had always used liquid nails. I like this much better. Beads easier and dries faster, I believe. Have applied this to: custom shutters, shelving, flooring repairs, shop projects, custom chopping blocks, and residential construction.

Simply excellent. Is perfect ! I love this adhesive.

Very easily applied and durable once dried. The bond is extremely strong even after the veneer settled. It was recommended to be used with Tritan BP stone veneer we used to upgrade our rental properties.

My toilet tissue roll holder would not stay on my wall. Thete was not a 2x4 stud behind the drywall to keep it up. I wondeted if I could just glue the rim to the drywall. The sales person , in that department recommended this and IT WORKED! It has been only 1 week but it is still firm! Color me Happy!

First time using this product. Very pleased!

Works great a little hard to get off your hands but that because i didnt wear gloves. I used it to hold the pots, stones and glass together. See almost finished lighthouses. Just need to add the solar light.

Supremely strong and easy to use. Used it to bond faux stone panels externally and worked very well.

I used this product to install insulated foil on some overhead doors. It works well but dries quickly when exposed to air and then slowly when covered and compressed.

Good product... good even flow, good grab, good hold. Joints "leak" a little as they set, so watch it and pay attention. MANY construction adhesives are just sticky garbage and will cause no end to agony, this one works well. It's amazing though, NONE of them have figured out to make the seal up in the nozzle, or to make the nozzle removable.. This simple adaptation is obviously beyond the grasp of the communist Chinese, but then.... so much is.. Be aware, however, it will NOT come out of your good pants... Incidentally, I have some hardened pants for sale...

I used this product to glue plastic caps onto my deck posts. I thought it worked well until I found one of the caps laying in the yard a week later. I checked the other caps and found that almost all of them were simply laying on top of the posts. The glue bonded well to the old, weathered deck posts, but didn't bond at all to the clean plastic caps.

Used it to glue on a capstone that had broken off of my flowerbed border wall. Feels like it is on there forever now!

I used this adhesive to install a granite countertop on an outdoor brick bar and it worked fine.

Best construction adhesive in the market today...

Some tubes were junk. They were solid near the bottom end of the tube. Just crushed the tube and wouldn't dispense. High failure rate !!!

Works well. Good adhesion. I needed a polyurethane based adhesive to install some oak stair treads. Water based could have caused warpage. This worked fine.

This glue was used as a high performance glue for solid wood 3/4" flooring, and out performed much more expensive pure wood flooring glues and is MUCH easier to dispense in the large tubes than spreading the urethane glues with a trowel.

Second time I've bought and used this for an outdoors project. Worked well hope it will hold up to New England winter. Attached outside light on stairs was the project.

Used this product to anchor pvc sheathing and trim to pressure treated framing on my porch. Worked out terrific using ss nails as well to hold the 1/4" cellular pvc to the frame. No bowing or rippling. I have used this product for other applications including attaching to masonry and it has never failed. Great product.