Customer Reviews for Masonite 30 in. x 80 in. 6 Panel Textured Hollow Core Primed Composite Interior Door Slab

Interior door sturdy enough, for the price.

You would expect the machine edge cuts from the manufacturer would at least be squared. Turns out this more than 3/8" off from being square! If you're still going to buy, take a t-square with you.

If you like to spend an hour each door trying to scrape off the product label that is attached to the door with a very sticky adhesive this is the door for you. What a mess.

I replaced all my interior doors and these allowed me to match existing frames perfectly and the doors excellent for privacy. Make sure you have a door know jig and a sharp Chisel

These doors are decent, but the marketing label is just terrible. It is stuck so hard to the door I literally spend more time getting the sticker off (with a chisel) than actually installing the door. It’s guaranteed to leave behind sticky bits or take the prime up with it so I find I need to reapply a primer there.

No cut out for hinges or door knobs. But really easy for the DIY to sort out.

Good price benefit with some style. Good for affordable and on a budget renovations. It looks great after installed.

Fit perfectly

Its need to be more solid

The label on the door is crap. To get it off for painting, it has to be scraped off hopefully not damaging the door then it leaves a glue residue. It takes more time to get the label off then it takes to cut the holes and mortise's. It sucks!

Well-made, light and easy to work with. The wood detail and finish was perfect for those looking to update the look of their doors in their space. For those who need to shorten the door to clear carpet or other bottom obstacles, be aware the bottom internal frame is only 1".

The glue came apart on the seam and I paid a handyman to install it as I’m disabled. I can’t afford to fix it, wherever the door was made cheaply.

I needed to change 8 of my 40 year old doors and found these in the door department here at The Home Depot. Overall a great value and quality. Came primed which was a plus. I did not need to break the bank so I chose this brand. I bought all slab doors and a Ryobi door hole set. The install with my old jambs went well since I used the old doors as a template to mark the hinges and area for the door knob. When painted these will bring my home back into the 21st century. Very pleased with my purchase.

Well since this is cheapest way to start, it also needs the most work done you create the 3 hinge marks in the door , next you have to drill the hole for the knob and the lock side whole, with the rectangular hole about 1/8" deep to install the lock cover plate in the door, next if you want a dead bolt another hole for the dead bolt and side hole for the bolt to come up of the door ,yes a lot of work, but it's worth that extra 7 dollars you save you can get all that work done except for the dead bolt for about 7 dollars more. Well I have to say the door with the work done & $7 dollars more one is missing the top/bottom and sides covers it's just open unpainted wood, where this cheaper one for $31.20 has all 6 sides of the door painted.I hope this door works out ok and guess 17 good reviews cant go wrong. By the way this door has the 6 panels molded into the door it's not flat.

End of door not square with panel which in my case causes door hinge to bind before door is able to close. The door doesn't close without almost pulling the hinge off the jamb. Needless to say the door is constructed poorly. Don't know if I'll return it or try and shave it down so it will work. The Oakville store had a whole pallet of these doors on the floor. Buyer beware.

i put the door up, it fits fine. it's nice and light so it was easy to install. i'd buy another one.

Overall not a bad door. It had a slight twist but since it's a slab you can select sides and force the wist against the jamb stop and hopefully over time the door will straighten up. As far as pricing goes it is expensive for a door made of cardboard core and panels made of pressed saw dust and glue.

We bought it for a pocket door to match our other 6 panel doors in the house. Works perfectly!

The door had to be trimmed on the bottom and there was very little solid wood. There was less than 1 inch of solid wood. We ended up having to fill the bottom of the door to make it solid to prevent it from being damaged at the bottom. Not happy with this product.

The door was excellent. I returned it because I found out that The owner of Home Depot funded the BIG LIE

OK door. Expensive for a hollow core. I understood price increase due to demands but shelves are filled again and companies just going after the average Joe's pocket book now

They are warped. Make sure when you pick them you use a level at Home Depot.

if you need to trim doors be careful, dont give much to trim

Great product.