Customer Reviews for Milwaukee 6 in. 5 TPI Thin Kerf Wood Cutting BiMetal SAWZALL Reciprocating Saw Blades (5-Pack)

I've found these to be good blades for taking down large wood materials that have nails. The blades have a good stiffness, but at 12", if you're not demolishing something of the proper size the tip is going to be swinging all over the place. And it's important to keep the shoe against the materials or else you'll bounce around with the saw. These blades work OK with my battery operated reciprocating saw; however, without a 3-5 amp hour battery, I run out of juice quickly. I actually prefer using these blades with my 12 amp plug-in reciprocating saw so there's enough power to use blades to their full potential. "Ax" seems like a good name for these blades.

My project was a tree stump. It had to come out. The 10-pack of blades was the perfect partner for the “Sawzall”. Most of the cutting was roots under the ground. The blades are tough. I buried the running blade under the large roots. The blades blasted through roots, dirt, and rocks. None broke, none even bent. I used up 7 of the 10-pack... wore the teeth right off them. Cheapest project ever! I’ll try to upload a couple pics to show you.

This is a six pack of Milwaukee twelve inch reciprocating saw blades. The blades have five teeth per inch, they are one inch tall, and they have a ½ inch universal tang so they can be used with other brands of reciprocating saws. The manufacturer claims that the blades have “Nail Guard” and “Fang Tip” which allows you to cut through nails in wood without breaking the blade’s teeth and it is the “fastest plunging” on any wood cutting. They also claim that the carbide tipped blades have 30 times longer life over standard blades and two times faster cutting than other carbide blades. I have no method of verifying the claims so I can only talk about my experience with the blades. I am a DIYer so I am not using the blades at a job site but so far my experience with these blades is that they do an exceptional job of cutting through wood. I have not yet had to cut through any nails so I can’t comment on their ability to cut through nails. I am very impressed with these blades so I can definitely recommend them for your reciprocating saw.

Blades as good as the Milwaukee name!

The blade works great in my DeWalt reciprocating saw but it didn't cut the screws as easily as I expected. For wood it is great!

Well, these blades were "suggested" to trim off tree limbs with, so I decided to put them to a maximized use. We had a 20+ year old Poplar tree that was cut down 3 months ago and the stump remained. I could purchase a chain saw, rent or hire a stump grinder, OR use these Sawzall Wood Blades. I'm a "do it yourselfer" with a limited budget, so I decided to use these blades with my DeWalt DW30 electric saw. I seriously doubt that many folks would put any blade to this test. The results are somewhat shocking as per the enclosed photos. I used ONLY 5 of the 10 blades to completely remove this sizable tree stump! Not kidding. If you want a hardy blade that will truly cut tree limbs, then considering how they performed on a STUMP, you should use these outstanding blades.

I can't tell you how much I LOVE these blades! If you are planning a demo anytime in the future, these are a MUST have for your project. The 10-pack is a great idea to just have around the shop. These bad boys are some of the most destructive saw blades I've every used, but the most incredible aspect about them is that you have incredibly precise control over the blade while in use. I cut straight through a 2x12 in a matter of seconds that was riddled with 16 penny nails, and it didn't even flinch at me. I did it again using just the tip of the blade and the result was exactly the same and honestly, it was easier to control! There is a hook nosed end that makes it extremely manageable when in use. Great blade and highly recommended!!

Very easy to cut the metal

Cut through bricks and mortar like it should. Does what it is supposed to do

Cut okay but the size was very small

The best compared to the competition .

Quick delivery. These are good blades for cutting grates.

A great demolition blade. The extra length allows extra cutting surface and helps in hard to reach places. Cuts through nails and rafters with ease.

great blades..easy to install and cuts through everything...

The blades got dull too fast

blades cut well and really hold up, one blade makes many cuts with plenty of life left in it

Bought these to complete demo for a renovation. Could only use the blade 4 times cutting cast iron pipes before it was too dull to cut anymore

These blades last a while cuts smooth light weight would buy them again as needed

Great long lasting pruning blades.