1-3/8 in. High Carbon Steel Universal Fit Wood Cutting Multi-Tool Oscillating Blade (3-Pack)

I have tried and uaws this product for atleast a month now. From cutting door jambs, flooring, 15 gauge nails, hardy boards. It cuts pretty fast and i noticed it still has plenty teeth to use. I can say. Thia product last me longer than the other non-carbide blades. And i would recommend buying this over buying lots of lower quality blades.

I use this blade honestly for anything it is my main blade I pull out and still had a good amount of life in it. I like how it cuts smooth and has no hesitation when coming into contact with any material I’ve cut with it. Honestly I’ve passed it around when people have needed a blade or my tool to make a cut and have no complaints at all. Only down side I could see is that it a piece broke off the teeth of the blade after only a second use but honestly it’s still holding up nice even with that.

I used the titanium enhanced carbide teeth blade to cut through framing nail with no effort at all. Smooth quick cut and the blade has no wear marks after making the cuts. Excellent product!

I used this to cut off about a dozen bolts. The first bolt I cut, some of the teeth just broke right off. After that, it cut amazing, just had to make sure I was cutting where there were still teeth.

Upon recieving this product I felt it would be most useful to me for cutting bolts in tight or hard to reach spaces. To give it a thourough test I started by cutting a piece if 1/8"x1" aluminum flat bar and it worked great, but one tooth did break. Then I cut a grade 2 bolt and again it performed great but chipped another tooth. I stepped it up to a grade 5 bolt and it chipped quite a few teeth to the point I was concerned about going up to grade 8. Dispite my concerns it cut the grade 8 just fine while chipping a few more teeth. I finished off my testing by cutting the grade 2 bolt into small pieces. I was able to make 5 more cuts without the cutting ability to be effected. It did get hot and start to glow durring these cuts but the blade was not effected. Overall I was initially concerned due to the teeth chipping but since the chipped and did not flatten they continued to cut and Im sure I will be able to get another dozen or so cuts with it. If you plan to use this tool all day every day for cutting metal this isnt the tool but for a all purpose blade to make the occasional metal cut in hard to reach spaces, it seems great.

These oscillating blades fit my Dremel tool perfectly. Milwaukee includes a small adaptor ring with the kit but I didn’t need it. I found the blade to be sharp and it cut through the wood trim pieces very easily. There are three blades in the package and if they last as long as the other Milwaukee blades and bits I have purchased, it will be quite a while before I need any new blades.

This Milwaukee 3-piece oscillating saw blade set comes with three blades and an adapter for certain Dremel tools. I don't know how the adapter works because I have a Milwaukee oscillating saw but I assume it should work, at least with the models listed on the packaging. As far as the blades themselves go, they are high-carbon steel but, in my opinion, mostly good for soft woods and trim, plastics and similar applications. Anything harder including wood with nails and you'll want something with carbide teeth, however at that point you may want a different tool entirely. Overall a great product for it's intended application. 5 stars for being made in the USA,

Like all the Milwaukee tools & blades I've ordered I found these oscillating multi-tool blades to be excellent. I usually use my oscillating tool for cutting the bottom of door trim when installing a floor so a sharp blade is critical to getting a clean cut. These blades do the trick as shown in the video I shot cutting a piece of PVC pipe. I More than once I've used this tool for other than its intended purpose, but who cares if it gets the job done. Also perfectly compatible with my oscillating multi-tool.

These Milwaukee Oscillating Multi-Tool Blades are awesome. At first, I wasn't too sure, they looked really flimsy to me but they are actually rather solid and stout. I've had some cheap blades in the past that gunk up and dull out super fast, but these blades seem to hold up really well. I cut through a 2x4 six times and this blade still wanted to keep on going, I only had to clean out the teeth one time because I cut through a section that had some pretty heavy sap buildup. And on top of that, these blades were able to cut through that 2x4 in a matter of seconds, and I didn't really have to put any work or force into it. That being said, I'm sure that the power of tool has something to do with that, but these blades on my 10-year old Craftsman worked fantastic and I would definitely buy more.

If you're looking for an oscillating tool blade that will stand up to countless cutting, you've come to the right place. In my belief, Milwaukee sets the standards in the industry for everything they manufacturer. These are high carbon blades made in the "GOOD OLD USA"! This 3 blade packet will fit just about all oscillating tools on the market. Comes with an adapter in the packet for use with the Dremel tools. Has cutting dimensions of 1 3/8 inch width and a cutting depth of 2 inches. Milwaukee Tools have been in existence for 96 years making first rate tools and accessories.